• Journal of Chest Surgery
• /
• v.19 no.4
• /
• pp.584-594
• /
• 1986

Despite the multivariate improvements in tissue treatment, material, and design of prosthetic heart valves in recent years, numerous complications that may lead to valve dysfunction remain a constant threat after valve replacement. Most common indications for prosthetic valve failure are primary valve failure, infective endocarditis, paravalvular leakage, and thromboembolism. From 1977 to 1986, 15 patients underwent reoperation for prosthetic valve failure in 278 cases of valve surgery. The etiology of prosthetic valve failure were primary valve failure in 12 patients [80 %], infective endocarditis in 2 patients [13.3 %], and a paravalvular leakage [6.7 %]. The average durations of implantation were 45.5 months; 53.9 months in primary valve failure, 16 months in infective endocarditis, and 4 months in paravalvular leakage. The rate of valve failure was high under age of 30 [11/15]. Calcifications and collagen disruption of prosthesis were main cause of primary valve failure in macro- & micropathology. Prosthesis used in reoperation were 5 tissue valves and 10 mechanical valves. Operative mortality were 13.3 % [2/15], due to intractable endocarditis and ventricular arrhythmia.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.5
• /
• pp.968-974
• /
• 2008

Proteomic analysis led to identification of the proteins of Vibrio vulnificus that were induced upon exposure to INT-407 cells, and 7 of which belong to the functional categories such as amino acid transport/metabolism, nucleotide transport/metabolism, posttranslational modification/protein turnover/chaperones, and translation. Among the genes encoding the host-induced proteins, disruption of purH, trpD, tsaA, and groEL2 resulted in reduced cytotoxicity. The purH, trpD, and tsuA mutants showed impaired growth in the INT-407 lysate; however, the growth rate of the groEL2 mutant was not significantly changed, indicating that the possible roles of the host-induced proteins in the virulence of V. vulnificus are rather versatile.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.886-891
• /
• 2005

The frequent maintenance required on some asphalt concrete (AC) pavement sections has made reconstruction with Portland Cement Concrete Pavement (PCCP) a feasible alternative. However, many constructability issues need to be addressed in order to realize the full potential of this alternative. Accelerated paving encompasses three classes of activities: methods to accelerate the rate of strength gain, methods to minimize the construction time, and traffic control strategies to minimize user delay. Three major AC intersections with severe rutting problems were reconstructed with PCCP. The entire reconstruction of each intersection, including demolition of the AC pavement and its replacement with PCCP, took place over a period of three days, starting on Thursday evening and opening the intersection to the traffic on Sunday afternoon. This paper discusses the use of PCCP for accelerated reconstruction of major urban intersections with minimal user and traffic disruption, using innovative construction techniques and traffic management optimization principles and demonstrates that concrete pavements can be constructed efficiently and quickly.

• Journal of ILASS-Korea
• /
• v.1 no.3
• /
• pp.51-59
• /
• 1996

An experiment was carried out on the structure of twin spray from pressurize-swirl nozzles, in order to investigate the effect of different size of spray nozzles on the characteristics of the overlap of two single sprays, for example, mean diameter, number density, and spatial distribution of flow rate. Using image processing method, the distributions of size and velocity of droplets of a single spray and twin spray were measured and compared to investigate the overlapping effect of two identical sprays. Comparing experimental results from a twin-spray with those from two-single sprays shows that the flow rate distribution of the twin-spray was concentrated around the midst of the overlapping region of two sprays. In this region, Sauter mean diameter (SMD) did not change much in the twin spray from 6032 nozzles, but it was smaller by 10 micrometers in the twin-spray than two-single sprays from 60063 nozzles. In spite of large difference in Weber numbers of the colliding sprays between the 60063 and 6032 nozzles, the phenomena did not have a big change in the overlapping region of twin spray. This shows that in the collision between droplets from two single spray in the overlapping region to cause the disruption of droplets, the size distribution of spray droplets was also important as well as Weber number.

• Journal of Computing Science and Engineering
• /
• v.5 no.4
• /
• pp.316-323
• /
• 2011

Recently, Proxy Mobile IPv6 (PMIPv6) has received much attention as a mobility management protocol in next-generation all-IP mobile networks. While the current research related to PMIPv6 mainly focuses on providing efficient handovers for unicast-based applications, there has been relatively little interest in supporting multicast services with PMIPv6. To provide support for multicast services with PMIPv6, there are two alternative approaches called Mobile Access Gateway (MAG)-based subscription and Local Mobility Anchor (LMA)-based subscription. However, MAG-based subscription causes a large overhead for multicast joining and LMA-based subscription provides non-optimal multicast routing paths. The two approaches may also cause a high packet loss rate. In this paper, we propose an efficient PMIPv6-based multicast protocol that aims to provide an optimal delivery path for multicast data and to reduce handover delay and packet loss rate. Through simulation studies, we found that the proposed protocol outperforms existing multicast solutions for PMIPv6 in terms of end-to-end delay, service disruption period, and the number of lost packets during handovers.

• Journal of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.73-73
• /
• 2003

Proof correction to the equation in the third paragraph of the DISCUSSION AND CONCLUSION has not been carried faithfully to the published version of the paper. The corrected equation should read ${\approx}10^{-3}\;M_8^4/^3(N_{\ast}/10^6\;pc^{-3})({\sigma}/300 km\;s^{-l})^{-l}(r/r_t)\;yr^{-1}$, where Ms is the mass of the SMBH in units of $10^8\;M_{\bigodot}$, $\sigma$ is the virial velocity of the stars, $r_t$ is the tidal radius of the SMBH. This estimates the frequency that a star would pass within a sphere with the radius r from the SMBH, rather than the frequency of the tidal disruption event. Therefore, it increases with the mass of the SMBH. However, the loss cone effect should also be taken into account, which reduces the actual event rate. Here, we adopted a factor of one hundred to consider the deficiency from the isotrophic rate. The authors sincerely regret this error.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2002.05a
• /
• pp.17-25
• /
• 2002

Application of electrical stimulation in the red meat species (eg. beef and sheep) processing has been erratic around the world and this may reflect an incomplete knowledge of how to optimise the technology. Although it is well established that stimulation increases the rate of post-mortem glycolysis other biochemical and biophysical effects have been implicated with the use of this technology. On the basis of currently available knowledge, this mini-review seeks to examine the current theories about the effect of stimulation on post-mortem muscle. The classical view that stimulation prevents muscle from shortening excessively during rigor development has been expanded to include the possibility that it also results in physical disruption of muscle structure. The interaction of these effects with the acceleration of the rate of proteolysis through activation of the calpain protease system has not been comprehensively reviewed in the past. As a result of conclusion driven, this article highlights several areas that may prove fruitful for further research. The challenge for further development of electrical stimulation systems is optimisation of the activation of the enzyme systems in parallel with manipulation of chilling regimes so as to ensure rigor mortis is achieved at temperatures which minimise shortening. The potential of regional stimulation of sections of the carcass to achieve this outcome is worthy of study given the different fibre composition of muscles and temperature gradients.

• Food Science of Animal Resources
• /
• v.22 no.3
• /
• pp.234-239
• /
• 2002

The use of electrical stimulation in the red meat processing has been inconsistent and the mechanism(s) associated with the improvement of meat quality in electrically stimulated carcass has been disputed. This may reflect an incomplete knowledge of how to optimise the technology and also mirrors the existence of unknown factors. Although it is well established that the stimulation treatment increases the rate of post-mortem glycolysis, other biochemical and biophysical effects have been implicated with the use of this technology. The classical view that stimulation prevents muscle from shortening excessively during rigor development has been expanded to include the possibility that it also results in physical disruption of muscle structure and early 'turn-on' of tenderizing process. However, the interaction of these effects with the acceleration of the rate of proteolysis through activation of the calpain pretense system has not been comprehensively unravelled. This mini-review attempts to examine the current theories about the effect of stimulation on post-mortem muscle.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1147-1151
• /
• 2018

As personal users create and share lots of contents at any time and any places, new networking architecture such as content centric networking (CCN) has emerged. CCN utilizes content name as a packet identifier, not address. However, current CCN has a limitation for content source mobility management. The movement of content sources cause long delivery latency and long service disruption. To solve that, a hierarchical mobility management was was proposed. However, the hierarchical mobility management scheme has still the loss of interest packets and long handoff latency. So, this paper presents the hybrid hierarchical mobility management in mobile CCN environements to reduce both the loss rate of interest packets and the handoff latency. It is shown from the performance evaluations shows that the proposed scheme provides low loss rate of control message.

• Journal of the Korean Ceramic Society
• /
• v.28 no.8
• /
• pp.625-625
• /
• 1991

The specimens for the corrosion test were made by hot-pressing of SiC power with 2 wt% Nl2O3 and 10wt% Al2O3 additions at 2000℃ and 2050℃. The specimens were corroded in 37 mole% NaCl and 63 mole% Na2SO4 salt mixture at 1000℃ up to 60 min. SiO2 layer was formed on SiC and then this oxide layer was dissolved by Na2O ion in the salt mixture. The rate of corrosion of the specimen containing 10 wt% Al2O3 was slower than that of the specimen containing 2 wt% Al2O3. This is due to the presence of continuous grain boundary phase in the specimen containing 10 wt% Al2O3. The oxidation of SiC produced gas bubbles at the SiC-SiO2 interface. The rate of corrosion follows a linear rate law up to 50 min. and then was accelerated. This acceleration is due to the disruption oxide layer by the gas evolution at SiC-SiO2 interface. Pitting corrosion has found at open pores and grain boundaries.