• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.5
• /
• pp.587-592
• /
• 2015

According to increase in the use of the LED, the demand for low power consumption LED display design of the controller block has increased. In this paper, the low power LED controller block was designed through the power source supply that leads adiabatic operation from constant current source circuit operated by digital signal control. The proposed circuit was implemented using a 0.35um CMOS process. and it demonstrated linear operation of the circuit. From the simulation result, the proposed circuit was evaluated with about 82% power consumption reduction effect in comparison with conventional LED controller block. This research is expected to be helpful for the low power operation and the solution for heat problem of LED display.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.166-174
• /
• 2008

Recently, the automotive industry has been developing rapidly. With the progress parts of the automobile components need high quality and the reliability. Among them, braking unit is essential device, and acquire the reliability through the performance test of brake. This study was aimed to design the performance-test-bench to measure the drag torque which has effect on caliper in braking unit. In this progressive technology, it is vital importance to use hydraulic and pneumatic, and to combine test bench with instrumentation engineering technology. This system to construct the design of hydraulic and pneumatic circuit, interface technique between sensors and personal computer, data acquisition and display design, and integrated control are very important technology. Moreover, reliable data are obtained through vacuum system and hydraulic and pneumatic system by using of booster and brake master cylinder which are actually applied to automobile. Then, data signal detector sensors for speed, pressure and torque is attached on this system. Therefore, in this study, we designed a performance-test-bench by and we also made an total control system using personal computer which is more progressive and flexible method than existing PLC control.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.563-568
• /
• 2010

TV businesses that have brought a competitive structure in terms of price, definition, product design for a long time now are bringing User eXperience (UX) into relief as DTVs come to support broadcast information-related services such as various broadcast channels and Electronic Program Guide(EPG), etc., and playing of multimedia contents like music/videos, etc. This study worked on an evaluation by developing a UI to control easily the various and complex broadcast contents or multimedia contents provided by DTVs. The UI Design for new DTVs was developed based on Function, Flow and Form in the concept of Single ABC (Access, Browser and Control), and the usability test of the developed UI concept along with the UIs of the major DTV products, was done for Channel Managers and the multimedia browsers for 32 users of DTVs in the U.K./U.S., respectively. As a result of the usability test, the new concept of Channel Manager was evaluated high both in the U.K./U.S, while the multimedia browser was evaluated low in the U.S., relatively.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.23-28
• /
• 2021

Augmented reality is a technique for combining virtual images into real life by showing information of virtual 3D objects on top of a real-world environment (Azuma et al., 2001). This study is an augmented reality-based educational content delivery device that receives user input that selects either a preset object or a photographed object for augmented reality-based training; It includes a three-dimensional design generation unit that generates a stereoscopic model of the augmented reality environment from an object, a three-dimensional view of the scene, a disassembly process of the developing road from a three-dimensional model, and a content control unit provided by the user terminal by generating educational content including a three-dimensional model, a scene chart, a scene, a decomposition process, and a coupling process to build a coupling process from the scene to the three-dimensional model in an augmented reality environment. The next study provides a variety of educational content so that children can use AR technology as well as shapes to improve learning effectiveness. We also believe that studies are needed to quantitatively measure the efficacy of which educational content is more effective when utilizing AR technology.

• Journal of the Ergonomics Society of Korea
• /
• v.17 no.3
• /
• pp.71-80
• /
• 1998

This study proposed a method to apply certain fuzzy-related Quality control concepts to design customer-oriented products considering user requirements and information starting with the product development stage. This approach showed how to define the importance level of design elements and how to Quantify complex subjective perception of products using the fuzzy linguistic rating method and quality function deployment concepts. Using this approach, various customer requirements could be interpreted and reflected on the early design phase of a new product. To validate the proposed method, an experiment was conducted for designing the shape of the beeper using 14 subjects and 10 commercial beeper products. Front area, width/length ratio, thickness, curve variance, weight, and display area were selected as design elements of the beeper. The results showed that among design elements, front area and weight are significantly related with the subjective perception of the products. Consequently, this study indicates that customer decision on product selection could be made by quantification of user perception for beeper products.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.5
• /
• pp.352-359
• /
• 2016

The soft keyboard with touch interaction is universally available on mobile phone, a variety of previous studies with respect to the soft keyboard on smart devices had been conducted. However, previous studies of cursor control for text entry on smart devices such as smartphone did not performed. In this study, we compared three types of cursor controls (Default, 3D touch, Slide) in smartphone using Fitts' law and C-D ratio. Then we performed a laboratory experiment with three cursor control types and evaluated using cursor movement time as a quantitative evaluation and 8 subjective metrics for usability as a qualitative evaluation. Then, we discussed what types of cursor control showed better performance and subjective satisfaction through their results. From these results, this study recommended the design guidelines for cursor control on smartphones and developed its study methods as our contributions.

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.158-161
• /
• 2017

In this paper, we propose Total RMS(Radiation Monitoring System) for nuclear and nuclear medicine. The proposed system can expand and control Stack Monitor, Area Monitor, and Water(Liquid) Monitor into one system, and can monitor the signals measured by each radiation detector in an integrated manner. The proposed system consists of a sensor module that detects the radiation, a display unit that displays the radiation dose near the radiation detection location, an alarm unit that reports the alarm when the detected radiation dose reaches the danger level, A Main Hub for collecting and storing the contents to the remote monitoring system, and an RMS Monitoring Unit for clearly displaying the measured radiation dose at the remote site. In order to evaluate the performance of Total RMS for the proposed nuclear and nuclear medicine field, it is confirmed that the measurement uncertainty is less than 8.5% and it operates normally within ${\pm}15%$ of the international standard.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.1
• /
• pp.46-55
• /
• 2008

In this paper, we designed the bay control unit that is based on the microprocessors and integrates with the new technology of electrical, electronic, and mechanical fields. Nowadays the customers have required much more integrated multi-protection relay, monitoring, control devices and power management for better and easier maintenance, performance, electrical system analysis and communication according to new trend of switchboard This bay controller supplies those requirements of customers with easy handling and operation. This bay controller provides a graphic display with rear-lit liquid crystal LCD and push buttons as kinds of HMI(Human Machine Interface). This bay controller provides the parameter setting program, control setting program, various editors and fault recording and analysis program on Windows/95/98/NT/2000/XP for HMI. In addition, this bay controller can be set manually and this manual setting function helps user to interface easily.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.82.3-82
• /
• 2001

This work presents a design technique for the implementation of the liquid level control system by based on the use of a single-chip microcontroller. The proposed model system offers the following attractive features : (1) application of the pressure transducer for sensing the height of liquid in tank (2) using the obtained liquid level for defining on-off condition of the water pump (3) the liquid values were controlled by using stepping motors for controlling of 57 points (4) can set up by using manual control or automatic control (5) can monitor and display the process status either on microcontroller-based control board or on the computer via RS232 serial-port. Experimental results have been employed to show the effectiveness ...

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.5
• /
• pp.711-717
• /
• 2010

In this paper, a new automatic punching system that generates pinholes expressing texts or images on a plastic plate is developed. The pin-holed plate is used as a new glamorous display board reflecting colourful lights from the light emitting diode (LED) installed on the edge side of the plate. The punching system has four actuators which work together to make multiple holes with accurate position and depth on the plastic plate. For even reflection of the lights from texts or images on the board and fast production of the pin-holed boards, we developed an accurate actuating structure of the system cooperating with a PID control algorithm. We also built a GUI-based integrated control system to help users easily design luminous texts or images on the plastic plate. Also, we conducted a performance test of the system to verify the punching speed and depth control of the pin holes on the plastic plate.