• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.1
• /
• pp.29-37
• /
• 2008

With the rapid development of display technology as well as the diversity of display, image quality assessment plays an important role in display color reproduction. The image quality has described by objective evaluation based on the physical measured data, such as contrast ratio, color reproduction range, color temperature, and gamma characteristics, etc., however, the final judgement is achieved by perceptual quality assessment of observers. Therefore, it is necessary to investigate the relationship between physical performance of display and perceptual image quality. Thus, in order to evaluate objectively the color reproduction characteristics of two mobile displays, TFT-LCD and AMOLED, we measured the darkroom contrast ratio of full screen, luminance and color temperature of full-screen white, full-screen gray and color linearity, tone reproduction of color scales for each RGB primary, and color reproduction range. Then the pair-wise comparison is implemented for image experts and naive observers not only to judge their preference on principal evaluation attributes but also to subjectively describe perceived image quality. Through two evaluation processes, we derived the objective bases that can prove the results of subjective image quality assessment by interconnecting physical factors that have influence on observers' preference judgements. Finally, this paper provided important information for improving the image quality and increasing preference from an observer's point of view.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.713-716
• /
• 2008

This paper presents an automatic back-light brightness control system for mobile displays. One of the most important factors in mobile display is the power consumption due to the limited and movable power source. More than 80% of power of the LCD display is consumed by LED bark-light unit (BLU). The target brightness also becomes higher because of its moving picture and high resolution image, so there are some side effects for not only excessive power consumption but also ergonomic inconvenience in dark environment. To prevent this discomfort and reduce power consumption, this paper proposes automatic brightness control (ABC) technique in mobile displays. Developed system contains TFT-LCD panel with built-in photo sensor, driver IC capable of controlling photo sensor, and BLU. Since the photo sensor array built in panel detects automatically outdoor ambient light intensity, the power of BLU in dark environment is reduced. Developed ABC system showed reduced power consumption of 50% in dark environment. We believe that the proposed system is very useful to control power of mobile TFT-LCD.

• Korean journal of food and cookery science
• /
• v.30 no.1
• /
• pp.84-91
• /
• 2014

The purpose of this study was to identify the effects of emotional labor on emotional exhaustion among school dietitians according to the level of their self-efficacy. A survey was administered on 300 school dietitians during September 2012 and a total of 277 usable questionnaires were received. The data were analyzed by using the SPSS 18.0 package program. As a result of principal factor analysis for validity test, 26 variables were classified into one factor for self-efficacy, three factors for emotional labor and one factor for emotional exhaustion with a total variance percentage of 67.371%. Internal consistency was estimated by Cronbach's alpha, which yielded reliability coefficients of 0.922 (self-efficacy), 0.916 (emotional display), 0.806 (surface acting), 0.808 (deep acting) and 0.850 (emotional exhaustion). Subjects were segmented into 2 groups of 'high self-efficacy' (n = 159) and 'low self-efficacy' (n = 118) according to the cluster analysis for self-efficacy variables. The 'high self-efficacy' group exhibited higher education(p < 0.01) and served less lunch meals than other groups (p < 0.05). According to multiple regression analysis, the emotional display proved to be significantly and positively related to emotional exhaustion (${\beta}$=0.319, p<0.001) in high self-efficacy group. However both emotional display (${\beta}$=0.233, p<0.05) and surface acting (${\beta}$=0.262, p<0.01) were positively related to emotional exhaustion in the low self-efficacy group. These results suggest that school dietitians should be more aware of their self-efficacy to relieve the effects of the emotional labor on emotional exhaustion.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.2
• /
• pp.217-221
• /
• 2012

As a part of basic research to improve screen quality, which deteriorates when strain occurs within optical sheets in LCD modules for laptop computers, a measurement system is needed to analyze the influence of heat and moisture, which are the main factors causing the strain. It is assumed that the existence of an air gap less of than 0.5 mm inside the LCD module causes humid air from outside to permeate through the module. To investigate this phenomenon, in this study a thin printed circuit board (PCB) of compact sensors that measure temperature and humidity is inserted into LCD modules, and thus, the changes in temperature and humidity can be analyzed in real time. The results can be used as basic data for simulation of the deformation behavior and structural design of LCD modules in the future.

• Korean Journal of Cognitive Science
• /
• v.8 no.4
• /
• pp.19-33
• /
• 1997

Icon is a small graphic which represents a particular function in computer interface. Comprehension and learning of icons are needed for using them because they represent some meanings. This study was conducted to examine which were more important factors in using icons. First, representational characteristics of icons were examined. Second, using a eyetracker, the way of coding of redundant display was examined which removed obscurity of display and gave more meaning to a user. Icons using attribute of object and direct discription of action were more efficient than icons of other representational form in comprehension. Redundant display was proved to have some advantages, especially when the icons had low familarity. Visual information processing of icons were discussed according to familarity and learning.

• The Journal of the Korea Contents Association
• /
• v.17 no.9
• /
• pp.21-31
• /
• 2017

The purpose of study was to ascertain whether Facebook users present themselves positively on Facebook. Also this study examined whether factors of self-efficacy, narcissism, and public/private self-consciousness affected positive self-presentation. The subjects for the study included 197 users who have been using Facebook. The analysis of behavioral attributes such as self-display, competency display, exemplary behavior display, etc, did not yield statistically high values to support users' positive self-presentation on Facebook. The results showed that self-efficacy, narcissism, and public self-consciousness have statistically significant influence on positive self-presentation. The study found that private self-consciousness did not have statistically significant influence on positive self-representation.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.9-23
• /
• 2019

The artificial intelligence speaker market is in a new age of mounting displays. This study aimed to analyze the difference of experience using artificial intelligent speakers in terms of usage context, according to the presence or absence of displays. This was achieved by using semantic network analysis to determine how the online review texts of Amazon Echo Show and Echo Plus consisted of different UX issues with structural differences. Based on the physical context and the social context of the user experience, the ego network was constructed to draw out major issues. Results of the analysis show that users' expectation gap is generated according to the display presence, which can lead to negative experiences. Also, it was confirmed that the Multimodal interface is more utilized in the kitchen than in the bedroom, and can contribute to the activation of communication among family members. Based on these findings, we propose a user experience strategy to be considered in display type speakers to be launched in Korea in the future.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.15-20
• /
• 2019

Inspection and measurement of surface quality is one of the most critical processes for manufacturing products such as semiconductor wafers, sapphire substrates, and display panels. The vibrations of the inspection and measurement devices are supposed to be the most dominant factors for severe measurement errors and longer measuring time. In this study, dynamic characteristics of an inspection and measurement device are analyzed through frequency response experiment and computer simulation to obtain parameters such as frequencies, magnitudes, mode shapes, and periods of vibrations. And then an active damper which consists of sensor, interface board, and actuator is designed based on the parameters to formulate the most effective reaction signal to suppress the vibrations which is generated by an interface board, and provided by an actuator. If the vibrations are measured by the sensor, the active damper immediately generates and provides the corresponding reaction signal to inspection and measurement device. The result shows that the active damper can suppress structural vibrations effectively and reduce measuring time of the device and enhance the productivity.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.29-37
• /
• 2021

A 7 nm technology node using extreme ultraviolet lithography with a wavelength of 13.5 nm has been recently developed and applied to the semiconductor manufacturing process. Furthermore, the development of sub-3 nm technology nodes continues to be required. In this study, design factors of an electrostatic deflector for an ultra-miniaturized microcolumn system that can realize an electron wavelength of below 1.23 nm with an acceleration voltage of above 1 eV were investigated using a three-dimensional simulator. Particularly, the optimal design of the electrostatic octupole floating deflector was derived by optimizing the design elements and improving the driving method of the 1 keV low energy ultra-miniaturized microcolumn deflector. As a result, the entire wide field of view greater than 330 ㎛ at a working distance of 4 mm was realized with an ultra-high-resolution electron beam spot smaller than 10 nm. The results of this study are expected to be a basis technology for realizing a wafer-scale multi-array microcolumn system, which is expected to innovatively improve the throughput per unit time, which is the biggest drawback of electron beam lithography.

• Journal of Information Display
• /
• v.2 no.3
• /
• pp.78-85
• /
• 2001

The growth of carbon nanotubes(CNTs) in anodic aluminum oxide(AAO) template and their application to a field emitter are described. AAO templates were fabricated by anodizing bulk aluminum and sputtered thin Al film on Nb-coated Si wafers. After Co catalyst had been electrochemically deposited into the bottom of the pores in AAO template, CNTs were grown by pyrolyzing $C_2H_2$. Depending on the reaction conditions, CNTs grew up to or over the top of the pores in AAO template with different structures. The morphology and structure of CNTs were observed with a scanning electron microscope and a transmission electron microscope. The diameter of CNTs strongly depended on the size of the pores in AAO template and the growing conditions. The electron field emission measurement of the samples resulted in the turn-on field of 1.9-2.2 $V/{\mu}m$ and the field enhancement factor of 2450-5200. The observation of high field enhancement factors is explained in terms of low field screening effect.