• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.617-622
• /
• 2018

자동차, 반도체, 플랜트 등 다양한 산업현장에서 PLC(Programmable Logic Controller) 기반으로 생산자동화 시스템을 제어하여 제품 양산이 이루어지고 있다. 이에 따라 산업현장에서는 PLC를 능숙하게 사용할 수 있는 전문 인력과 PLC 교육을 위한 교육 플랫폼이 필요하다. 기존에 개발된 교육 플랫폼들의 경우 PLC를 기반으로 하여 다양한 액추에이터와 센서를 제어할 수 있다. 하지만 화면상 나타나는 생산자동화 시스템이 화면에 2D로만 나타나 현실성이 결여되기 때문에 학습 시 정확한 이해가 힘들다는 단점이 있다. 본 논문에서는 이러한 단점을 보완하여 가상현실에서 학습이 가능한 교육용 V-Factory 시스템을 제안한다. 개발한 V-Factory 시스템은 가상 I/O 드라이버를 도입하여 다양한 종류의 센서 및 액추에이터를 제어할 수 있고, 가상현실에서 가시화된 생산자동화 시스템이 구동되는 모습을 확인할 수 있다. 또한 HMD(Head Mounted Display)를 사용하여 현실적인 PLC 시뮬레이션이 가능하다. 개발한 V-Factory 시스템을 통해 가상현실에서 효과적인 PLC 학습이 이루어질 것으로 기대한다.

• Corrosion Science and Technology
• /
• 제6권6호
• /
• pp.282-285
• /
• 2007

Smaller size and higher integration of electronic systems make narrower interconnect pitch not only in chip-level but also in package-level. Moreover electronic systems are required to operate in harsher conditions, that is, higher current / voltage, elevated temperature / humidity, and complex chemical contaminants. Under these severe circumstances, electronic components respond to applied voltages by electrochemically ionization of metals and conducting filament forms between anode and cathode across a nonmetallic medium. This phenomenon is called as the electrochemical migration. Many kinds of metal (Cu, Ag, SnPb, Sn etc) using in electronic packages are failed by ECM. Eutectic SnPb which is used in various electronic packaging structures, that is, printed circuit boards, plastic-encapsulated packages, organic display panels, and tape chip carriers, chip-on-films etc. And the material for soldering (eutectic SnPb) using in electronic package easily makes insulation failure by ECM. In real PCB system, not only metals but also many chemical species are included. And these chemical species act as resources of contamination. Model test systems were developed to characterize the migration phenomena without contamination effect. The serpentine-shape pattern was developed for analyzing relationship of applied voltage bias and failure lifetime by the temperature / humidity biased(THB) test.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.117-120
• /
• 2008

교량받침은 활하중, 크리프, 온도변화, 건조수축 등에 의한 상부구조의 변위를 흡수하는 역할을 수행한다. 국내 탄성받침 설계기준인 KS F 4420은 전단변형을 탄성받침 총 고무 높이의 70% 이내로 제한하고 있는데, KS F 4420에 의해 설계된 탄성받침이 요구되는 전단성능을 발휘하기 위해서는 허용 전단변형률이 전단파괴에 대하여 충분한 안전성을 보유해야 한다. 더욱이 탄성받침이 지진격리장치와 함께 내진설계에 사용될 수 있는 상황을 고려할 경우, 탄성받침은 KS F 4420의 허용전단변형률보다 높은 수준의 전단성능을 확보해야 한다. 이 논문에서는 국내 탄성받침의 전단성능을 확인하기 위하여 극한전단실험을 실시하였다. 실험 결과 탄성받침은 200% 이상의 전단변형률에서 파괴가 발생하여 KSF 4420의 허용전단변형률 규정이 안전 측이라는 사실을 알 수 있었다. 하지만 일체화된 거동을 할 것이라 기대 되었던 탄성받침이 200% 전단변형률 내외에서 받침 분리현상을 보였다. 관측된 받침분리 현상은 탄성받침의 내진설계 적용성을 고려할 경우 교량 시스템에 예기치 못한 충격 또는 집중 응력을 발생 시킬 수 있기 때문에 이러한 현상이 방지될 수 있도록 관련 규정이 필요하다고 판단된다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제9권4호
• /
• pp.38-43
• /
• 2017

Sensor Networks (WSNs) can be defined as a self-configured and infrastructure-less wireless networks to monitor physical or environmental conditions, such as temperature, sound, vibration, pressure, motion or pollutants and to cooperatively pass their data through the network to a main location or base-station where the data can be observed and analyzed. Typically a wireless sensor network contains hundreds of thousands of sensor nodes. The sensor nodes can communicate among themselves using radio signals. A wireless sensor node is equipped with sensing and computing devices, radio transceivers and power components. The individual nodes in a wireless sensor network (WSN) are inherently resource constrained: they have limited processing speed, storage capacity, communication bandwidth and limited-battery power. At present time, most of the research on WSNs has concentrated on the design of energy- and computationally efficient algorithms and protocols In order to extend the network life-time, in this paper we are looking into a routing protocol, especially LEACH and LEACH-related protocol. LEACH protocol is a representative routing protocol and improves overall network energy efficiency by allowing all nodes to be selected to the cluster head evenly once in a periodic manner. In LEACH, in case of movement of sensor nodes, there is a problem that the data transmission success rate decreases. In order to overcome LEACH's nodes movements, LEACH-Mobile protocol had proposed. But energy consumption increased because it consumes more energy to recognize which nodes moves and re-transfer data. In this paper we propose the new routing protocol considering nodes' mobility. In order to simulate the proposed protocol, we make a scenario, nodes' movements randomly and compared with the LEACH-Mobile protocol.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.347-349
• /
• 2009

Air quality of indoor space environment is affected by various pollutants like as particles and chemical stuffs. The indoor air pollution affects directly the human respiration organs to cause consequently unpleasant mental status. The $CO_2$ concentration level is one of the harmful components of air pollutants. Major factor to increase the $CO_2$ concentration level is the people's breath amount in indoor. The car exhaust gas diffused from the around road also has strong affect on $CO_2$ concentration. There are some other reasons to affect the $CO_2$ concentration change, such as, real-time change of the population movement, closeness to the indoor air flow inlet window and changes in road car traffic amount. A remote monitoring system to measure environmental indoor air pollution concerning on the $CO_2$ concentration was studied and installed realized set-up model. Zigbee network configuration was applied for this system and the $CO_2$ concentration data were collected through USN network. A software program was developed to assure systematic analysis and to display real-time data on web pages. For the experimental test various condition was set up, like as, window opening, stopping air condition operation and adjusting fan heater work, etc. The analysis result showed the relation of various environmental conditions to $CO_2$ concentration changes. The causes to increase $CO_2$ concentration were experimentally defined as windows closing, the stopping air condition system, fan heater operation. To keep the $CO_2$ concentration under the legally required ppm level in public access indoor space, the developed remote measurement system will be usefully applied.

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.183-196
• /
• 2017

The research efforts directed at advancing water electrolysis technology continue to intensify together with the increasing interest in hydrogen as an alternative source of energy to fossil fuels. Among the various water electrolysis systems reported to date, systems employing a solid polymer electrolyte membrane are known to display both improved safety and efficiency as a result of enhanced separation of products: hydrogen and oxygen. Conducting water electrolysis in an alkaline medium lowers the system cost by allowing non-platinum group metals to be used as catalysts for the complex multi-electron transfer reactions involved in water electrolysis, namely the hydrogen and oxygen evolution reactions (HER and OER, respectively). We briefly review the anion exchange membranes (AEMs) and electrocatalysts developed and applied thus far in alkaline AEM water electrolysis (AEMWE) devices. Testing the developed components in AEMWE cells is a key step in maximizing the device performance since cell performance depends strongly on the structure of the electrodes containing the HER and OER catalysts and the polymer membrane under specific cell operating conditions. In this review, we discuss the properties of reported AEMs that have been used to fabricate membrane-electrode assemblies for AEMWE cells, including membranes based on polysulfone, poly(2,6-dimethyl-p-phylene) oxide, polybenzimidazole, and inorganic composite materials. The activities and stabilities of tertiary metal oxides, metal carbon composites, and ultra-low Pt-loading electrodes toward OER and HER in AEMWE cells are also described.

• 한국경제지리학회지
• /
• 제11권1호
• /
• pp.148-163
• /
• 2008

수 세기에 걸쳐 대학이 성장함에 따라 이는 주변의 커뮤니티와 더욱 밀접한 관련을 지으며 발전하거나 변화하게 된다. 초기의 작은 도시는 19세기를 통해 산업화를 겪고 중심지로 발전하게 되며, 대부분의 도시들은 대학을 중심으로 산업과 연구의 기조를 형성하고 이는 문화적으로 다양한 인구의 밀집지를 이루는데 한 근간이 되어왔다. 대학을 중심으로 구성되어 있는 커뮤니티는 그 자체가 하나의 작은 도시구조의 모습을 띄며, 대학과 인근 지역은 협조, 혹은 마찰을 공유하며 성장하고 변화한다. 많은 미국의 대학들이 대학의 성장과 함께 필요한 건물과 시설을 확장하고 개발하면서, 이로 인해 빚어지는 교통량의 증대와 기존 오픈스페이스의 손실 등 성장관리에 귀추를 두고 기존 지역과의 융화를 꾀하며 발전을 추구하고 있다. 하버드 대학의 북쪽 캠퍼스 개발의 사례를 통해 지역개발의 한 단편으로서 캠퍼스 개발계획은 어떠한 의미가 있는지 살펴보고자 한다.

• 천문학회지
• /
• 제38권4호
• /
• pp.463-470
• /
• 2005

In this paper, we have made the component-based development of observational software for KASI solar imaging spectrograph (KSIS) that is able to obtain three-dimensional imaging spectrograms by using a scanning mirror in front of the spectrograph slit. Since 2002, the KASI solar spectrograph has been successfully operated to observe solar spectra for a given slit region as well as to inspect the response functions of narrow band filters. To improve its capability, we have developed the KSIS that can perform sequential observations of solar spectra by simultaneously controlling the scanning mirror and the CCD camera via Visual C++. Main task of this paper is to introduce the development of the component-based software for KSIS. Each component of the software is reusable on the level of executable file instead of source code because the software was developed by using CBD (component-based development) methodology. The main advantage of such a component-based software is that key components such as image processing component and display component can be applied to other similar observational software without any modifications. Using this software, we have successfully obtained solar imaging spectra of an active region (AR 10708) including a small sunspot. Finally, we present solar $H{\alpha}$ spectra ($6562.81{\AA}$) that were obtained at an active region and a quiet region in order to confirm the validity of the developed KSIS and its software.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.263-267
• /
• 2013

The continuing demand for increasingly slimmer and brighter liquid crystal display (LCD) panels has led to an increased focus on the role of light guide panels (LGPs) or optical films that are used to obtain diffuse, uniform light from the backlight unit (BLU). The most basic process in the production of such BLU components is the micromachining of V-shaped grooves. Thus, given the current trend, micromachining of V-shaped grooves is expected to play increasingly important roles in today's manufacturing technology. LCD BLUs comprise various optical elements such as a LGP, diffuser sheet, prism sheet, and protector sheet with V-shaped grooves. High-aspect-ratio patterns are required to reduce the number of sheets and enhance light efficiency, but there is a limit to the aspect ratio achievable for a given material and cutting tool. Therefore, this study comprised a series of experimental evaluations conducted to determine the machining limit in microcutting V-shaped grooves on electroless nickel plated die materials when using single-crystal diamond tools with point angles of $20^{\circ}-80^{\circ}$. Cutting performance was evaluated at various cutting speeds and depths of cut using different machining methods and machine tools. The experimental results are that V-shaped patterns with angles of $80^{\circ}$ or up can be realized regardless of the machining conditions and equipment. Moreover, the feed rate has little effect on machinability, and it is thought that the fly-cut method is more efficient for shallow patterns.

• 한국기계가공학회지
• /
• 제13권3호
• /
• pp.6-14
• /
• 2014

Touch panels are widely used in the modern display industry as the cover glass of smart mobile phones and tablet PCs. Glass cutting machines are commonly used to cut the panels into their proper sizes. Vibration of these glass cutting machines is assumed to be the main factor leading to the creation of burrs, notches, cracks, scratches and chips on the cut surfaces, eventually causing defects of the cover glass. In this study, the vibrations of a glass cutting machine used for the shearing of cover glass components were analyzed through an experiment and a computer simulation. The structural properties leading to vibration were also analyzed in an effort to determine design alterations which can suppress these vibrations. Moreover, each design alteration was applied to a computer simulation model to determine the effect of different alteration on suppressing vibration. The results show that simple design alterations can substantially suppress vibrations of glass cutting machines.