• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.498-508
• /
• 2008

TECA(Terminal Cabin) has train information, fault display, maintenance function and training function for driver, as sub-device of Seoul-Pusan Express train's on-board computerized device. Concerning KTX train's driving, signal driving is required for high speed driving, and it is true that we have difficulty in troubleshooting and acquisition of basic information through long train and one-man driving. Therefore, rapid and correct processing about various information and TECA device for maintenance are indispensable for its utilization. But there is not study example in hardware, maintenance about this device and device development according to new requirements. Therefore, this study will help understanding of driver assistance terminal device's maintenance performance development, describing TECA's basic functions necessary for device development and its requirements. Accordingly, I suppose that this thesis will be utilized to complete specification, necessary for new driver assistance terminal device development.

• Journal of Digital Convergence
• /
• v.17 no.1
• /
• pp.85-90
• /
• 2019

This paper is a study on IoT based map inside the building and fire perception system using microprocessor and LABVIEW program. The smart control system implemented in this paper is designed to identify the location of fire by using microprocessor, flame detection sensor, carbon monoxide sensor and temperature sensor, and to guide the optimal travel route through Zigbee communication. And the proposed system uses QR code to interoperate with smartphone. The coordinator control verified that the sensor value of the smart control system installed through the LABVIEW software was confirmed. The IoT based control system studied in this paper was implemented with Arduino mega board and LABVIEW software, and the operation status was confirmed by display device and coordination.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.5
• /
• pp.691-700
• /
• 2021

The IP cameras have rapidly replaced the analog CCTVs as the cameras have the advantages of not only being able to remotely monitor, but also supplying power through the UTP cable, In this paper, we introduce the protocol architecture of the ONVIF standard which is widely applied to the IP camera and other Internet protocols to support it, and implement the ONVIF Device on a commercial board. Although these functions can be controlled by the Client (PC), several functions such as privacy masks, temperature display of the thermal camera, and ROI (Region of Interest) are implemented through a web viewer on the device. Through the experiment, the functions of ONVIF Profile S and web viewer are verified through SOAP messages exchanged between Device (IP camera) and Client program and streamed images.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.456-456
• /
• 2023

본 연구에서는 위성영상 상황판연계·표출시스템 적용을 위한 SNS 주민참여 콘텐츠를 개발하고, 재난대응 표준위기관리절차 기반의 주민참여정보 활용방안을 제시하고자 하였다. 재난상황관리에 있어 SNS의 활용을 통한 주민참여 확대적용 방안을 모색하고자 재난 대비·대응 관련 공공 및 정부부처에서 활용 중인 SNS 채널을 조사하였으며, 상황관리에 SNS를 적용한 선행사례를 분석하였다. 이를 기반으로 SNS를 적용한 예방안전 및 피해복원 확대 적용 방안을 제시하였으며, 신속한 위기대응을 위한 보조적인 의사결정 지원도구로서의 콘텐츠를 제안하였다. 먼저, 예방안전 및 피해복원 확대 적용을 위해 SNS에 주민들이 작성한 게시글을 웹 크롤링과 데이터 마이닝을 통해 분석하여 재난 상황인지와 상황판단 및 피해범위 추정에 활용하는 방안을 제시하였고, 이를 상황판연계·표출시스템에서 표출하기 위한 예시화면을 설계하였다. 또한, 연구 1차년에 수행했었던 위성영상을 활용한 재난상황대응 표준위기관리절차 중 위성영상정보에 주민참여정보를 연계·중첩하여 재난의 전조감지 단계부터 확산양상 및 피해범위를 확인하고, 재난기록을 분석하여 추후 발생된 재난에 선제적으로 대비할 수 있는 방안을 제시하였다. 그러나, 주민참여 기반 SNS 콘텐츠 적용을 위한 우선 해결사항으로는 재난상황판단 시, 정보의 정확성과 신뢰성 측면에서 의사결정을 위한 보조도구로서 활용을 할 것인지에 대한 중앙재난안전상황실과의 충분한 협의가 필요하며, 상황실에서 해당 콘텐츠를 활용하게 될 경우, SNS 정보의 행정망 방화벽 허용가능여부에 대한 추가 분석설계가 필요한 상황이다. 이를 위해 금년 연구수행에서 상황실 실무자 수요조사를 통해 SNS 정보 활용에 대한 반영여부를 결정할 예정이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.458-458
• /
• 2023

본 연구에서는 위성영상 활용 지능형 재난관측·감시 기술 개발을 목적으로 위성영상과 멀티소스(CCTV, 항공영상, 공공DB 등)와의 연계·융합을 통해 재난상황관리의 정확도 향상과 위성영상 활용성 제고 방안을 제시하고자 하였다. 위성영상 수집·배포시스템으로부터 전달되는 위성영상과 멀티소스의 연계 융합을 통한 재난상황정보의 표출을 목적으로 상황판연계 표출시스템 가동 절차와 위성영상 수집을 통한 위험탐지 알고리즘과의 연계를 위해 재난상황업무 기반 시스템 가동절차를 수립하고, 위기관리표준 매뉴얼 상 상황업무절차를 적용해 예비설계를 진행하였다. 상황실 실무자 설문을 통해 작성된 시스템 요구사항과 규격서를 기반으로 상황업무절차를 적용해 먼저업무시스템 설계를 진행하였다. 평시에는 GIS통합상황판에서 관리됨을 전제로 위성영상 수집에 대한국가적 예산 투입 측면을 고려해 중대본 설치가 필요한 대형재난 발생상황을 가정하여 상황판연계·표출시스템의 가동되도록 설계하였다. 또한, 위성영상 분석을 통한 피해위험도와 재난이력통계 등 멀티소스와 중첩한 결과를 실시간으로 표출함에 따라 상황실근무자는 재난확산 여부를 판단하고, NDMS를 통해 재난상황을 전파할 수 있도록 설계하였다. 상황판연계 표출시스템의 원활한 데이터 입/출력을 위해 재난유형 및 분석단계별 클래스 정의, 유스케이스 ID(요구기능)와 1:1 또는 1:n매칭을 수행하여 재난유형 및 분석단계별 클래스를 정의하였다. 정의된 클래스는 유스케이스인 요구기능과 매칭을 수행하였고, 시스템 가동절차 중 피해위험도분석, 재난이력통계, 중첩결과표출, NDMS 상황전파에 대한 상황업무절차를 기반으로 산불·홍수·산사태·대설·태풍 총 5종의재난별 시퀀스를 설계하였다. 마지막으로 화면정의서와 UI/UX설계서를 기반으로 Figma를 통해 시스템구동화면을 사전에 모의하였다. 향후, 진행되는 연구에서는 위성영상과 멀티소스를 연계한 화면을 실체화하여 더욱 정확한 재난상황관리가 가능하도록 NDMS 연계 상황판 표출 시스템을 개발하고자 한다.

• Korean journal of applied entomology
• /
• v.52 no.4
• /
• pp.341-348
• /
• 2013

We desinged and evaluated a remote-sensing sex pheromone trap for real-time monitoring of Mythimna separata (Lepidoptera: Noctuidae), a migratory insect in Korea. The system consisted of a modified cone-trap with a sex pheromone lure, a sensing module based on light interruption, a signal transmission module based on code division multiple access, a main electronic board for system control, a power supply based on a solar collector, a stainless steel-pole supporting the system, and a signal collection and display system based on an internet web page. The ratio (>92%) of the actual number of insects to the signal number in the remote-sensing trap was improved by sensing only within a limited period at night on the basis of the insect's circadian rhythm, control of signal sensitivity on the basis of sensing software programming, 1-h interval for signal transmission, and adjustment of the signal transmission program. The signal occurrence pattern in the remote-sensing trap was conclusively similar (correlation coefficient, >0.98) to the actual pattern of adult occurrence in the trap. The result indicated that the remote-sensing trap based on the attraction of the sex pheromone lure for M. separata has a promising potential for practical use. Occurrence of M. separata adults was observed several times in 2011 and 2012, and the peaks were sharp.

• Clean Technology
• /
• v.21 no.2
• /
• pp.85-89
• /
• 2015

Utilized in a variety of electronic components, electronic components industry with metallic ink technology was established itself as a major technology research and development was gradually increasing, silver ink that is excellent in conductivity and stability, have long been used in the industry of electronic components in recent years and silver ink has been the size of nanoscale particles dispersed by developing display, an electronic tag, a flexible circuit board or the like used in the semiconductor and electronics as has been highlighted in, however industry modernization of equipment by increasing the production and consumption of products generated during the production process and environmental pollutants by use of waste products is expected to bring a serious environmental problem. In this study, prepared by a wet reduction method, the manufacturing process of the silver nano-ink to the entire process of the environmental impact assessment (LCA) was evaluated using the techniques. Life cycle assessment software GaBi 6 was used as received from the relevant agencies of the silver nano-ink data with reference to the manufacturing process, building inventory was international organization for standardization (ISO) 14040, 14044 compliant LCA conducted over four stages.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.1-7
• /
• 2020

In recent years, as LED display systems are actively spread, study on effective control methods for an LED driver for driving the systems has been in progress. The most representative among them is the uniform brightness control method for the LED driver channel. In this paper, we propose an LED driver IC for BLU with current compensation and system protection functions to minimize channel luminance deviation. It is designed for current accuracy within ±3% between channels and a channel current of 150 mA. In order to satisfy the design specifications, the channel amplifier offset was canceled out by a chopping operation using a channel-driving PWM signal. Also, a pre-charge function was implemented to minimize the fast operation speed and luminance deviation between channels. LED error (open, short), switch TR short detection, and operating temperature protection circuits were designed to protect the IC and BLU systems. The proposed IC was fabricated using a Magnachip 0.35-um CMOS process and verified using Cadence and Synopsys' Design Tool. The fabricated LED driver IC has current accuracy within ±1.5% between channels and 150-mA channel output characteristics. The error detection circuits were verified by a test board.

• Horticultural Science & Technology
• /
• v.34 no.6
• /
• pp.860-870
• /
• 2016

Continuous monitoring of environmental parameters provides farmers with useful information, which can improve the quality and productivity of crops grown in greenhouses. The objective of this study was to develop a greenhouse environment measurement system using a low-cost microcontroller with open-source software. Greenhouse environment parameters measured were air temperature, relative humidity, and carbon dioxide ($CO_2$) concentration. The ranges of the temperature, relative humidity, and $CO_2$ concentration were -40 to $120^{\circ}C$, 0 to 100%, and 0 to 10,000 ppm, respectively. A $128{\times}64$ graphic LCD display was used for real-time monitoring of the greenhouse environments. An Arduino Uno R3 consisted of a USB interface for communicating with a computer, 6 analog inputs, and 14 digital input/output pins. A temperature/relative humidity sensor was connected to digital pins 2 and 3. A $CO_2$ sensor was connected to digital pins 12 and 13. The LCD was connected to digital pin 1 (TX). The sketches were programmed with the Arduino Software (IDE). A measurement system including the Arduino board, sensors, and accessories was developed (totaling $244). Data for the environmental parameters in a venlo-type greenhouse were obtained using this system without any problems. We expect that the low-cost microcontroller using open-source software can be used for monitoring the environments of plastic greenhouses in Korea.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.6
• /
• pp.41-50
• /
• 2011

This article is concerned with the technology to provide car driver the car's status which are composed of car trouble code in car engine and many sensors. In addition, it installs vehicle diagnostic programs on wireless communication's portable device, for example, Smart phone, PDA, PMP, UMPC. As a result, this is to provide car manager with many information of car sensors when we go to car maintenance. it can monitor relevant information on vehicle by portable device in real time, alert drivers with specific messages and also enable them to address abnormalities immediately. Moreover, the technology could help the drivers who perhaps don't know very well about their vehicles to drive safely and economically as well; the reason is because the whole system is composed of just Vehicle-information collecting device and personal wireless communication's portables and transfers the relating data to server computers through wireless network in order to handle information on vehicles. This technology make us monitor vehicle's running, failure and disorder by using wireless communication's portable device. Finally, this study system is composed of a lot of application to display us the car's status which get car's inner sensor information while driving a car.