• 박물관보존과학
• /
• 제8권
• /
• pp.49-69
• /
• 2007

경주 안압지에서 출토된 10점의 금동제 판불에 대한 과학적 분석 결과이다. 우선 X-선 형광분석(XRF)기를 이용하여 판불의 성분을 확인하였고, X-선회절분석기(XRD)를 사용하여 판불 표면을 덮고 있는 부식물의 종류를 규명하였다. 그리고 실체현미경과 주사전자현미경(SEM/EDS)을 이용하여 판불의 미세부분 및 도금 층 조사를 수행하였고, 판불의 내부 상태 조사를 위하여 X-선 투과 촬영을 실시하였다. 그 결과 안압지 판불의 재질은 구리(86~95%)와 주석(4~12%)이 주성분인 Cu-Sn 이원계 청동합금제이며, 금이 도금된 금동제품이라는 것을 알 수 있었다. 그리고 금동판불의 붉은색 부식물은 산화구리(cuprite, Cu₂O), 검은색 부식물에서는 황화구리(chalcocite, Cu₂S)가 검출되었다. 현미경을 통한 미세 구조 관찰 결과 밀랍주조에 의해 제작된 것으로 판단되었으며, 도금층의 두께가 불균일하며, 바탕의 패인 부분을 메운 것으로 보아 아말감도금 기법으로 제작된 것으로 추정되었지만 수은이 검출되지 않은 점은 의문으로 남는다. 마지막으로 X-선 투과 조사로 주조과정에서 발생한 기공으로 추정되는 작은 원형의 반점들이 존재하는 것을 관찰할 수 있었다.

• Journal of Information Display
• /
• 제11권1호
• /
• pp.8-11
• /
• 2010

In this study, a new thin films passivation technique using Zn with high electronegativity and $MgF_2$, a fluorine material with better optical transmittance than the sealing film materials that have thus far been reported was proposed. Targets with various ratios of $MgF_2$ to Zn (5:5, 4:6 and 3:7) were fabricated to control the amount of Zn in the passivation films. The Mg-Zn-F films were deposited onto the substrates and Zn was located in the gap between the lattices of $MgF_2$ without chemical metathesis in the Mg-Zn-F films. The thickness and optical transmittance of the deposited passivation films were approximately 200 nm and 80%, respectively. It was confirmed via electron dispersive spectroscopy (EDS) analysis that the Zn content of the film that was sputtered using a 4:6 ratio target was 9.84 wt%. The Zn contents of the films made from the 5:5 and 3:7 ratio targets were 2.07 and 5.01 wt%, respectively. The water vapor transmission rate (WVTR) was determined to be $38^{\circ}C$, RH 90-100%. The WVTR of the Mg-Zn-F film that was deposited with a 4:6 ratio target nearly reached the limit of the equipment, $1\times10^{-3}\;gm^2{\cdot}day$. As the Zn portion increased, the packing density also increased, and it was found that the passivation films effectively prevented the permeation by either oxygen or water vapor. To measure the characteristics of gas barrier, the film was applied to the emitting device to evaluate their lifetime. The lifetime of the applied device with passivation was increased to 25 times that of the PLED device, which was non-passivated.

• 한국산업보건학회지
• /
• 제7권2호
• /
• pp.209-222
• /
• 1997

Authors surveyed the ground water near the waste disposed from a fiberglass production factory to confirm the presence of glassfiber in the water and to determine the effect of sampling conditions and storage on the recovery of fibrous materials in the ground water. Sample was collected at every 4 hours for 48 hours consecutively. After finishing the 48 hours sample, water sampling was done from each tap after repeated turning on and off the water for 30 seconds at each time. Sample was collected in the two 1.5 liter polyethylene bottle after vigorously shaking the bottle with the same water several times with the flowing tap water. At each paired sample, one bottle was stored stand still at room temperature, and the other sample was filtered immediately after sampling. Water was filtered on the Mixed Cellulose Ester filter with negative pressure. Each sample was divided into upper and lower layer. The other bottle was stored at room temperature standstill for 7 days and filtered in the same fashion as the other pair of sample did. Each MCE filter was divided into 4 pieces and one piece was treated with acetone to make it transparent. Each prepared sample was observed by two researchers under the light and polarizing microscopy, scanning electron microscopy and energy dispersive X-ra microanalysis. Fibers were classified by the morphology and polarizing pattern under the polarizing microscope, and count was done. 1. There was a significant fluctuation in number of the fibers, but there was no specific demonstrable pattern. 2. Non-polarizing fibers frequently disappeared after 7 days's storage. But cluster of fibers were found at the wall of the same container by scratching technique. 3. Polarizing fibers were usually found in between the filter and the manicure pasted area. Possible explanations for this phenomenon will be that either these fibers are very light or have electronic polarity. Hence, these fibers are not able to be attached on the surface of slide glass. 4. Under the scanning electron microscopic examination, the fibers which are not refractive under the light microscopy were identified as glassfiber. Other fibers which is refractive under the polarizing microscopy were identified as magnesium silicate fibers. It is strongly suggested that development of standardized method of sample collection and measurement of fibrous material in the water is needed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제37권
• /
• pp.34.1-34.14
• /
• 2015

Background: Over the past 30-40 years, various carbon implant materials have become more interesting, because they are well accepted by the biological environment. The traditional carbon-based polymers give rise to many complications. The polymer complication may be eliminated through carbon fibres bound by pyrocarbon (carbon/carbon). The aim of this study is to present the long-term clinical results of carbon/carbon implants, and the results of the scanning electron microscope and energy dispersive spectrometer investigation of an implant retrieved from the human body after 8 years. Methods: Mandibular reconstruction (8-10 years ago) was performed with pure (99.99 %) carbon implants in 16 patients (10 malignant tumours, 4 large cystic lesions and 2 augmentative processes). The long-term effect of the human body on the carbon/carbon implant was investigated by comparing the structure, the surface morphology and the composition of an implant retrieved after 8 years to a sterilized, but not implanted one. Results: Of the 16 patients, the implants had to be removed earlier in 5 patients because of the defect that arose on the oral mucosa above the carbon plates. During the long-term follow-up, plate fracture, loosening of the screws, infection or inflammations around the carbon/carbon implants were not observed. The thickness of the carbon fibres constituting the implants did not change during the 8-year period, the surface of the implant retrieved was covered with a thin surface layer not present on the unimplanted implant. The composition of this layer is identical to the composition of the underlying carbon fibres. Residual soft tissue penetrating the bulk material between the carbon fibre bunches was found on the retrieved implant indicating the importance of the surface morphology in tissue growth and adhering implants. Conclusions: The surface morphology and the structure were not changed after 8 years. The two main components of the implant retrieved from the human body are still carbon and oxygen, but the amount of oxygen is 3-4 times higher than on the surface of the reference implant, which can be attributed to the oxidative effect of the human body, consequently in the integration and biocompatibility of the implant. The clinical conclusion is that if the soft part cover is appropriate, the carbon implants are cosmetically and functionally more suitable than titanium plates.

• 공업화학
• /
• 제27권5호
• /
• pp.502-507
• /
• 2016

본 연구에서는 탄소나노튜브, 니켈 및 산화아연의 항균특성 활용을 목적으로 새로운 항균 나노 복합 재료를 개발하였다. 니켈 코팅된 탄소나노튜브의 제조 및 그들의 동시발생 집중 및 비활성 세균에 대한 항균소재의 잠재적 응용성을 평가하였다. 제조된 니켈 도금 탄소나노튜브의 형상 및 니켈 도금은 전계 방출 주사전자현미경(FE-SEM) 및 X선 에너지 분산 분광기(EDS)를 사용하여 분석하였다. 나노복합소재의 항균 특성을 확인할 수 있는 타깃 세균은 황색포도상구균과 대장균으로 지정하였다. 니켈 도금된 탄소나노튜브와 산 처리된 탄소나노튜브로 각각 강화된 나노복합소재의 황색포도상구균 및 대장균에 대한 항균특성을 비교하였을 때, 니켈 도금된 탄소나노튜브/산화아연으로 강화된 나노복합소재의 항균 특성이 더 우수한 결과를 보이는 것을 확인할 수 있었다. 이러한 결과에 따라서, 탄소나노튜브 표면에 도금된 니켈이 복합소재 내에서 세균의 살균 작용에 중요한 역할을 하는 것으로 판단할 수 있다. 또한, 첨가된 산화아연은 나노복합소재의 항균특성 향상을 목적으로 제안되었다.

• 한국재료학회지
• /
• 제30권8호
• /
• pp.383-392
• /
• 2020

In this paper, AgCl/Ag₃PO₄/diatomite photocatalyst is successfully synthesized by microemulsion method and anion in situ substitution method. X-ray diffraction (XRD), photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and ultraviolet-visible spectroscopy (UV-Vis) are used to study the structural and physicochemical characteristics of the AgCl/Ag₃PO₄/diatomite composite. Using rhodamine B (RhB) as a simulated pollutant, the photocatalytic activity and stability of the AgCl/Ag₃PO₄/diatomite composite under visible light are evaluated. In the AgCl/Ag₃PO₄/diatomite visible light system, RhB is nearly 100 % degraded within 15 minutes. And, after five cycles of operation, the photocatalytic activity of AgCl/Ag₃PO₄/diatomite remains at 95 % of the original level, much higher than that of pure Ag₃PO₄ (40 %). In addition, the mechanism of enhanced catalytic performance is discussed. The high photocatalytic performance of AgCl/Ag₃PO₄/diatomite composites can be attributed to the synergistic effect of Ag₃PO₄, diatomite and AgCl nanoparticles. Free radical trapping experiments are used to show that holes and oxygen are the main active species. This material can quickly react with dye molecules adsorbed on the surface of diatomite to degrade RhB dye to CO₂ and H₂O. Even more remarkably, AgCl/Ag₃PO₄/diatomite can maintain above 95 % photo-degradation activity after five cycles.

• 한국결정성장학회지
• /
• 제23권2호
• /
• pp.108-113
• /
• 2013

$CuInSe_2$(CIS) chalcopyrite 물질은 고효율 박막 태양전지를 위한 광흡수층의 물질로 매우 잘 알려져 있다. 최근 태양광 산업의 흐름은 안정적인 재료 개발과 가격 경쟁력 있는 태양전지를 위한 효율적인 제조 공정을 일치시키는 것이다. 저가의 CIS 광흡수층 위해 다양한 방법으로 제조를 시도하였고, 본 논문에서는 CIS 광흡수층을 저가형으로 제조를 위해 상용화되는 6 mm pieces를 사용하여 high frequency ball milling과 cryogenic milling을 이용해 CIS 나노입자를 얻었다. 그리고, CIS 광흡수층은 불활성 분위기의 glove box 안에서 milling된 나노입자를 사용하여 paste coating법으로 제조하였다. Chalcopyrite CIS 박막은 기판온도 550도에서 30분간 셀렌화 한 후 성공적으로 제조되었으며, Al/ZnO/CdS/CIS/Mo 구조의 CIS 태양전지는 evaporation, sputtering 및 chemical bath deposition(CBD) 등 다양한 증착 방법으로 각각 제조하였다. 결론적으로, 나노입자를 이용한 CIS 태양전지 전기적 변환효율은 1.74 %를 얻었으며, 개방전압(Voc)는 29 mV, 합선전류밀도(Jsc)는 35 $mA/cm^2$, 그리고 충진율(FF)은 17.2 %였다. 나노입자 CIS 광흡수층은 energy dispersive spectroscopy(EDS), x-ray diffraction(XRD) 그리고 high-resolution scanning electron microscopy(HRSEM) 등으로 특성 분석을 하였다.

• Elastomers and Composites
• /
• 제39권1호
• /
• pp.12-22
• /
• 2004

라디오 주파수(13.56 MHz) 무전극 종형 플라즈마 반응기를 이용하여 천연고무 가교체의 표면을 클로로디플루오로메탄으로 처리하였다. FT-적외선 분광분석으로 표면개질 정도를 정성적으로 조사하였다. 플라즈마 처리표면의 마찰힘은 플라즈마 처리시간 증가에 따라 감소하였다. 고무표면에 에틸렌글리콜과 물을 떨어뜨려 접촉각을 측정한 결과 플라즈마 처리에 따라 감소하는 것으로 미루어 플라즈마 개질에 따라 표면극성이 증가하는 것을 확인하였다. 유리판 표면을 동일조건으로 플라즈마 처리한 경우는 극성의 감소만이 확인되었다. 표면자유에너지의 London 비극성 및 극성요소를 계산하는데 있어서 기하평균법과 조화평균법이 유용한 것으로 확인되었다. 평균방법에 관계없이 플라즈마 처리시간이 증가함에 따라 표면자유에너지는 증가하였다 그러나 조화평균법으로 계산된 자유에너지가 기하평균법으로 계산된 값에 비해 상대적으로 높았다. 플라즈마 표면개질은 마찰의 계면, 히스테리시스, 점성요소들에 영향을 미침으로써 마찰계수를 변화시키는 것으로 나타났다.

• 대한화장품학회지
• /
• 제44권2호
• /
• pp.201-210
• /
• 2018

본 연구에서는 원적외선 방사체로 알려져 있는 준 보석 광물인 옥(jade)의 한 종류인 경옥(jadeite) 파우더를 함유하는 스킨 케어용 O/W 유화 제형을 제조하였다. 경옥 파우더는 화장품 원료로 기 등록된 옥의 다른 한 종류인 연옥(nephrite) 파우더나, 자외선 차단을 목적으로 화장품에 적용되는 이산화티탄 파우더와는 달리, 아무런 분산 첨가제 없이도 수상에서 한달 이상 안정하게 분산이 유지되며 저점도 유화 제형에 5 wt% 이상 균질 유화기로 용이하게 분산이 가능하였다. 이렇게 제조된 경옥 파우더가 2% 함유된 제형을 피부에 도포하고 피부의 표면 온도변화를 적외선 열 영상 분석기로 측정한 결과 동일인의 안면 피부에 경옥 파우더가 함유된 O/W 유화제형을 도포한 부위가 30 min 경과 시 대조군을 도포한 부위의 온도 대비 평균 약 $+1.5^{\circ}C$, 최대 $+2^{\circ}C$의 온도차이를 나타내는 것을 확인하였다. 이와 같은 현상의 원인을 보다 분명하게 확인하기 위하여 경옥 파우더 자체를 가온한 뒤 복사에 의한 열 방출을 살펴보았고, 전파장대에서의 흡광 분석, 원적외선 방사율 및 표면 원소 분석을 진행한 결과, 이와 같은 피부 온도 변화는 경옥 파우더의 원적외선 방사 효과에 의존하는 것이 아니라 경옥 파우더의 표면에 노출된 원소들과 스킨케어용 화장품에 높은 비율로 포함되어 있는 물 분자와의 수소결합으로 인해 수분 증발을 억제하여 열에너지의 손실을 막기 때문인 것으로 확인되었다. 결론적으로 경옥 파우더는 화장품용 새로운 보습, 보온 소재로서 활용이 가능하며, 흡광 분석결과로 미루어 보아 이산화티탄과 같은 무기 자외선 차단제와 간단히 혼합 병용하여 자외선 및 유해 가시광선 영역의 차단을 증대시키는 보조 소재로도 유용할 것이다.

• Journal of Radiation Protection and Research
• /
• 제42권1호
• /
• pp.33-41
• /
• 2017

Background: Phosphate rock and its by-product are widely used in various industries to produce phosphoric acid, gypsum, gypsum board, and fertilizer. Owing to its high level of natural radioactive nuclides (e.g., $^{238}U$ and $^{226}Ra$), the radiological safety of workers who work with phosphate rock should be systematically managed. In this study, $^{238}U$, $^{232}Th$, $^{226}Ra$, and $^{40}K$ levels were measured to analyze the transport characteristics of these radionuclides in the production cycle of phosphate rock. Materials and Methods: Energy dispersive X-ray fluorescence and gamma spectrometry were used to determine the activity of $^{238}U$, $^{232}Th$, $^{226}Ra$, and $^{40}K$. To evaluate the extent of secular disequilibrium, the analytical results were compared using statistical methods. Finally, the distribution of radioactivity across different stages of the phosphate rock production cycle was evaluated. Results and Discussion: The concentration ratios of $^{226}Ra$ and $^{238}U$ in phosphate rock were close to 1.0, while those found in gypsum and fertilizer were extremely different, reflecting disequilibrium after the chemical reaction process. The nuclide with the highest activity level in the production cycle of phosphate rock was $^{40}K$, and the median $^{40}K$ activity was $8.972Bq{\cdot}g^{-1}$ and $1.496Bq{\cdot}g^{-1}$, respectively. For the $^{238}U$ series, the activity of $^{238}U$ and $^{226}Ra$ was greatest in phosphate rock, and the distribution of activity values clearly showed the transport characteristics of the radionuclides, both for the byproducts of the decay sequences and for their final products. Conclusion: Although the activity of $^{40}K$ in k-related fertilizer was relatively high, it made a relatively low contribution to the total radiological effect. However, the activity levels of $^{226}Ra$ and $^{238}U$ in phosphate rock were found to be relatively high, near the upper end of the acceptable limits. Therefore, it is necessary to systematically manage the radiological safety of workers engaged in phosphate rock processing.