• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.546-546
• /
• 2013

Zinc silicate ($Zn_2SiO_4$) has been identified as a suitable host material for a wide variety of luminescent activators, such as transition metal and rare earth elements. In particular, manganese-activated $Zn_2SiO_4$ exhibits highly efficient photoluminescenceand cathodoluminescence, which allows this material to be used in fluorescent lamps and display applications. In this study, we investigated the green and yellow luminescence from Mn-doped $Zn_2SiO_4$ thin films that were synthesized using radio frequency magnetron sputtering followed by annealing at $600{\sim}1,200^{\circ}C$ The refractive index of the $Zn_2SiO_4$: Mn films showed normal dispersion behavior. It was found that the $Zn_2SiO_4$: Mn films annealed at $800^{\circ}C$ ossessed a mixture of alpha and beta phases. The obtained photoluminescence spectrum consisted of two emission bands centered at 525 nm in the green range and 574 nm in the yellow range. The green luminescence originates from the divalent Mn ions in alpha phase of $Zn_2SiO_4$, while the yellow luminescence comes from the divalent Mn ions in beta phase. The films annealed at and above $900^{\circ}C$ xhibited only the alpha phase. The broad PL excitation band was observed ranging from 220 to 300 nm with a maximum at around 243 nm.

• Korean journal of food and cookery science
• /
• v.13 no.2
• /
• pp.185-191
• /
• 1997

The effects of five hydrated emulsifiers with or without specified proteins (flour, egg) and/or polydextrose on the reduced-calorie cake as baked product model systems were compared. The small molecule amphiphiles (SMA) used were monoglycerides (MG), sorbitan monostearate (SMS), polysorbate (PS) 60, sucrose ester (SE) F7O, and SE Fl60. All flour batters with each emulsifier and supplements had similar low foam drainages (0.00∼1.03$m\ell$) indicating those systems were fairly stable in the presence of flour protein. The cake batter using starch instead of flour without egg and polydextrose and with some emulsifiers had relatively large amount of drainages (4.20∼5.87$m\ell$). When the egg and polydextrose were added to the blank cake batters using starch, foam drainages tended to show relatively low scores (0.13∼1.48$m\ell$) indicating the cake batter dispersion system is stabilized. Starch cakes made with SE F70 without egg or polydextrose(blank) unexpectedly had high volume index of 199.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.41.2-41.2
• /
• 2013

We present the statistical properties of a volume-limited sample of 7,429 nearby (z = 0.033-0.044) galaxies from the Sloan Digital Sky Survey Data Release 7. By performing a visual inspection, we classified our sample galaxies according to the Hubble sequence (Hubble 1926, 1936). Then we excluded apparently smaller and flatter galaxies from our database because morphology classification on them turned out to be difficult. Our results cover structural (e.g. concentration index, color, magnitude, stellar mass, etc.), spectroscopic (e.g. velocity dispersion, $H{\beta}$ absorption line, Fe absorption line, Mg absorption line, accretion rate, $H{\alpha}$ emission line, etc.), and environmental (e.g. density, etc.) properties of each morphology type based on morphology distribution. For this analysis, we used the recent re-measurements of spectral line strengths by Oh and collaborators (2011). Our statistics confirm the up-to-date understanding on galaxy populations, e.g., correlations between morphology and line strengths and in turn derived ages and so on.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.29-32
• /
• 1999

$GaF_3$ films were directly grown on p' and p-type GaAs(100) substrates using a $SF_6$ plasma discharge system. GaAs MIS(Meta1-Insulator-Semiconductor) capacitor was successfully fabricated for about 1 hour at temperature $290^{\circ}C$ using the as-grown $GaF_3$ films. The as-grown films on p'-GaAs exhibited a current density of less than 6.68 $\times$ $1O^{-9}$ A/$cm^2$ at a breakdown field of 500kV/cm and a refractive index of 2.0 ~ 2.3 at a wavelength of 632.8 nm. The dielectric constant was about 5 derived from 1 MHz capacitance-voltage (C-V) measurements. Dielectric dispersion of the fluoridated films on p'-GaAs measured ranged from 100 Hz to 10 MHz was not observed.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.4
• /
• pp.85-90
• /
• 2009

Although most of existing hydration heat control methods show a certain degree of hydration heat control, generally, there are many problems as mentioned above. Therefore, our laboratory previously developed a hydration heat control method using an exposed heat pipe, which solves most of these problems and simultaneously displays excellent hydration heat control. Unfortunately, even this method had some problems such as the processing, transport, and assembly of heat pipes, and the surface treatment of a cut plane after pouring, and hardening concrete. Therefore, in this study, a hydration heat control method using an embedded pipe has been developed with the expectation that this method solves those problems in hydration heat control using an exposed heat pipe. As a result of the experiment, the peak temperature of ECHP and ICHP specimen about $4.5{\sim}6.5^{\circ}C$ than the OPC specimen and the probability of thermal cracked generated in ECHP and ICHP specimen decreased up to $13{\sim}20%$. Finally, it was confirmed in this study that the hydration heat control method using an embedded heat pipe is significantly more superior and cost effective than the existing method of an exposed one.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.1
• /
• pp.34-41
• /
• 2003

Connectivity is a quantitative indicator of landscape structure, and connectivity of urban green areas is an indicator of ecological integrity in urban landscapes. The purposes of this study are to assess the connectivity of urban green areas in Seoul, and to develop a method of siting new green areas for better connectivity. Diverse methods for connectivity assessment and indices of connectivity are reviewed and applied to the connectivity assesment of green areas in Seoul. The indices of connectivity of green areas in Seoul turned out to be higher than expected, maybe because many of them are rather evenly distributed, serving as stepping stones, and because there are many riparian corridors, including the Han River. Analysis also shows the optimum location of new green space patches or corridors will be those spots that would link the mainland, or large green areas outside the city, and existing green areas in the city. Restoration of urban streams as ecological corridors will significantly enhance connectivity. Three different scenarios with increasing numbers of new green areas in the city were then prepared. The changes of connectivity were measured and the possible success rates of animal dispersal were simulated. The results revealed that restoration of streams will increase the connectivity and success rates of animal dispersal.

• Macromolecular Research
• /
• v.17 no.8
• /
• pp.603-608
• /
• 2009

Novel ultra-high molecular weight polyethylene (UHMWPE)/zirconia composites were previously prepared by the in situ polymerization of ethylene using a Ti-based Ziegler-Natta catalyst supported on to the surface of zirconia, as a bearing material for artificial joints. Tribological tests revealed that a uniform dispersion of zirconia in UHMWPE markedly increased the wear resistance. The effects of zirconia content on the oxidation behavior of the ${\gamma}$-ray-treated UHMWPE/zirconia composite surfaces were examined. The oxidation index that estimates the oxidation degree as the content of total carbonyl compounds was monitored using Fourier transform infrared spectroscopy-attenuated total reflectance. The changes in the surface composition due to the oxidation were confirmed by electron spectroscopy for chemical analysis. The extent of oxidation decreased with increasing zirconia content, which was attributed to the increased crystallinity as well as the decreased polymer portion of the UHMWPE/zirconia composites.

• Food Science and Biotechnology
• /
• v.15 no.4
• /
• pp.589-594
• /
• 2006

The effect of five commercial gums (carboxylmethylcellulose, CMC; guar gum, GG; hydroxypropylmethyl-cellulose, HPMC; locust bean gum, LBG; and xanthan gum) at a concentration of 0.25% on the rheological properties of rice flour (RF) dispersions was investigated in steady and dynamic shear. The steady shear rheological properties showed that RF gum mixture dispersions (5%, w/w) at $25^{\circ}C$ had high shear-thinning flow behavior (n=0.20-0.31) exhibiting a yield stress. Magnitudes of consistency index (K), apparent viscosity (${\eta}_{a,100}$), and Casson yield stress (${\sigma}_{oc}$) of RF-gum mixtures were much higher than those of RF dispersion with no added gum (control). Activation energy values (6.67-10.8 kJ/mole) of RF-gum mixtures within the temperature range of $25-70^{\circ}C$ were lower than that (11.9 kJ/mole) of the control. Dynamic rheological data of log (G', G") versus log frequency (${\omega}$) of RF-gum mixtures had positive slopes (0.15-0.37) with G' greater than G" over most of the frequency range (0.63-63 rad/sec), demonstrating a frequency dependency. Tan ${\delta}$ (G"/G') values of RF-gum mixtures, except for xanthan gum, were much higher than that of the control.

• Structural Engineering and Mechanics
• /
• v.76 no.4
• /
• pp.551-559
• /
• 2020

On the basis of nonlocal strain gradient theory, considering the material properties of porous FGM changing with thickness and the influence of moment of inertia, the wave equation of FG nano circular plate is derived by using the first-order shear deformation plate theory, by introducing dimensionless parameters, we transform the equations into dimensionless wave equations, and the dispersion relations of bending wave, shear wave and longitudinal wave are obtained by Laplace and Hankel integral transformation method. The influence of nonlocal parameter, porosity volume fraction, strain gradient parameters and power law index on the propagation characteristics of bending wave, shear wave and longitudinal wave in FG nano circular plate.

• Journal of Astronomy and Space Sciences
• /
• v.39 no.2
• /
• pp.35-42
• /
• 2022

During their respective missions, the spacecraft Voyager and Cassini measured several Saturn magnetosphere parameters at different radial distances. As a result of information gathered throughout the journey, Voyager 1 discovered hot and cold electron distribution components, number density, and energy in the 6-18 Rs range. Observations made by Voyager of intensity fluctuations in the 20-30 keV range show electrons are situated in the resonance spectrum's high energy tail. Plasma waves in the magnetosphere can be used to locate Saturn's inner magnetosphere's plasma clusters, which are controlled by Saturn's spin. Electromagnetic electron cyclotron (EMEC) wave ring distribution function has been investigated. Kinetic and linear approaches have been used to study electromagnetic cyclotron (EMEC) wave propagation. EMEC waves' stability can be assessed by analyzing the dispersion relation's effect on the ring distribution function. The primary goal of this study is to determine the impact of the magnetosphere parameters which is observed by Cassini. The magnetosphere of Saturn has also been observed. When the plasma parameters are increased as the distribution index, the growth/damping rate increases until the magnetic field model affects the magnetic field at equator, as can be seen in the graphs. We discuss the outputs of our model in the context of measurements made in situ by the Cassini spacecraft.