• Elastomers and Composites
• /
• 제48권1호
• /
• pp.67-75
• /
• 2013

E-TPE(Engineering Thermoplastic Polyether Ester)는 Ester 관능기를 갖는 Elastomer 소재로서 리사이클이 가능하며 빠른 가공성을 지닌다. 또한 경량성이 뛰어나 자동차의 경우 연비향상에 도움을 주는 친환경 소재로 부각되고 있다. 고무와 엔지니어링 플라스틱의 특성을 모두 가지고 있는 E-TPE는 사용 가능한 온도영역이 넓고, 내열성 및 내유성이 우수하여 자동차 부품소재분나 전기전자분야의 신소재로 주목받고 있으나 국내에서는 원천기술이 부족하여 전량 수입에 의존하고 있는 실정이므로 연구개발이 시급하다. 본 연구에서는 하드 세그먼트로 폴리에스터계(TPEE)를 base로 하여 소프트 세그먼트로 Ethylen-prophylene-Copolymer와 CSM(Choloro sulphonated polyethylene Rubber), VAMAC(Ethylene Acrylic Rubber), NBR(Acrylonitrin Butadiene Rubber)의 탄성체를 1,3-Phenylene-bisoxazoline 가교제로 동적가교 시켜 함량과 첨가된 고무에 따른 물성을 관찰하였다. 그 결과 NBR 첨가된 동적가교물의 물성이 다른 고무에 비해 내열성 및 내유성 향상에 되었음을 확인하였다.

• 지구물리와물리탐사
• /
• 제16권3호
• /
• pp.109-118
• /
• 2013

높이 23 m인 보령시 청천댐 상부와 인근에서 5 kg 해머를 이용하여 소규모 굴절법 및 표면파 탐사를 실시하였다. 인공 지진파의 수직 및 수평성분을 초동주시 토모그래피 및 레일리파 분산곡선 역산을 통하여 천부 P파속도(${\nu}_p$)와 S파속도(${\nu}_s$) 구조를 파악하였다. 중생대 퇴적암질 기반암의 평균 ${\nu}_p$와 ${\nu}_s$는 댐마루 30 m 깊이에서 각각 1650 m/s와 950 m/s, 하류쪽 댐체 끝 지점 10 m 깊이에서 각각 1650 m/s와 940 m/s로 분석된다. 이 층들의 동포아송비는 0.24 ~ 0.25의 범위로, 고화된 퇴적층의 값과 일치한다. 댐체로부터 152 m 하류지점의 깊이 45 m 시추공 부근에서의 SH파 굴절법 토모그램은 10 ~ 12 m 깊이에 평균 vs가 870 m/s인 임계굴절면이 존재함을 보여준다. 이 지역에서는 덮개층의 ${\nu}_p$와 ${\nu}_s$가 각각 500 m/s와 200 m/s인 상부층과 깊이에 따라 속도가 거의 선형으로 증가하는 하부층으로 구성되어 있다.

• 한국가스학회지
• /
• 제20권6호
• /
• pp.50-57
• /
• 2016

배관은 석유화학플랜트에서 가장 많은 구성요소이며, 주요설비들에서 생산된 물질을 수송하는 매우 중요한 역할을 수행한다. 특히, 저온 또는 고온의 물질을 수송하는 배관들의 경우 물질의 온도변화를 최소화하기 위해 보온재를 배관의 외면에 덮어 사용하는 경우가 다수이다. 그러나 이러한 보온재에 덮인 배관들에서 부식이 발생할 경우 보온재를 제거하지 않고서는 확인하기 어렵기 때문에 현장검사시 유도초음파를 이용한 비파괴적 방법이 사용되고 있다. 본 논문에서는 보온재 내부에서 발생하는 보온재하 부식(CUI : Corrosion Under Insulation)을 유도초음파를 사용하여 효과적으로 검출하기 위해서 유도초음파의 위상속도 분산선도와 파형구조의 이론적 해석을 통해 최적 발생조건을 선정하고자 하였다. 본 연구의 결과는 다양한 석유화학플랜트 배관의 보온재하 부식에 대한 유도초음파를 이용한 현장검출에 적용할 경우 매우 유용할 것이다.

• 한국대기환경학회지
• /
• 제13권1호
• /
• pp.91-98
• /
• 1997

Y-zeolite and ${\gamma}$-Al$_2$O$_3$ were used as supports on CO and $C_3$H$_{6}$ oxidation for diesel emission control. The catalysts composed of Pd and Pt as active components were wash coated on honeycomb type ceramic substrate. The oxidation of CO and $C_3$H$_{6}$ was carried out over prepared honeycomb in a fixed bed continuous reactor in the temperature range of 20$0^{\circ}C$~50$0^{\circ}C$ and 20,000 GHSV (h$^{-1}$ ). Surface area of Y-zeolite was larger than that of ${\gamma}$-Al$_2$O$_3$ due to channel structure of Y-zeolite. Therefore, high conversion of CO and $C_3$H$_{6}$ could be obtained because of good dispersion of active metals over Y-zeolite. The honeycomb used Y-zeolite as a support showed higher $C_3$H$_{6}$ conversion than that of ${\gamma}$-Al$_2$O$_3$ due to better cracking and isomerization activity of Y-zeolite. PdPt catalyst showed high conversion of CO and $C_3$H$_{6}$ at low temperature region, 20$0^{\circ}C$~30$0^{\circ}C$, for their synergy effects. PdPt/Y-Zeolite catalyst could achieve more than 80％ conversion of $C_3$H$_{6}$ at 30$0^{\circ}C$. The use of Y-zeolite as a support increased CO and $C_3$H$_{6}$ conversion, and decreased SO$_2$ conversion very effectively. Y-zeolite found to have a good adaptability as a support for the diesel emission after treatment system.

• 한국식품조리과학회지
• /
• 제10권4호
• /
• pp.405-411
• /
• 1994

This study was conducted to know the quality of chou made with flour pastes which were stored at different conditions of quick freezing, slow freezing, cold and room temperature. Also, this study included investigation of the chou properties such as expansion, sensory evaluation, degree of gelatinization, and physical and structural properties of paste were observed. There were not significant differences m diameter, height, volume, appearance, hollow formation, and sensory evaluation between the chou made with the paste stored at freezing condition and chou directly baked after pasting. Quick and slow freezing storages did not significantly affect the properties of chou, and the same results were obtained among the chou made with pastes thawed at room temperature and in microwave ovenrange. The chou of pastes stored at room temperature and in microwave ovenrange. The chou of pastes stored at room temperature and stored in refrigerator showed lowed expansion and value of sensory evaluation than those of frozen pastes. The paste stored at room temperature had the lowest hardness and viscosity compared with the other storage conditions. According to the observation of light microscope. the lipid bodies of the paste of freezing storage smaller those of the room temperature and refrigerator storage. The expantion of chou made with paste stored at room temperature was greatly decreased due to the high coalescence of lipid bodies, and also the paste components such as lipid, starch granule gluten at room temperature had inferior dispersion condition. The general tendency of the degree of gelatinization of chou were low in all treatments of paste. The values were 23.5%~46.0% in freezing, 77.3% in room temperature, 68.7% in directly baked after pasting, and 61.0% in cold storage, respectively. The formation and the taste of chou made with frozen paste were similar to those of chou directly baked pasting.

• Asian Journal of Atmospheric Environment
• /
• 제4권3호
• /
• pp.189-197
• /
• 2010

An orchestrated attempt was made to analyze samples of bulk and individual particulate matters (PM) collected at the Gosan ground-based station on the west coast of Jeju, Korea. A two-stage filter pack sampler was operated to collect particles in both large (> $1.2\;{\mu}m$) and small size fractions (< $1.2\;{\mu}m$) between the Asian dust (hereafter called "AD") storm event and non-Asian dust period. Elemental components in bulk and individual particles were determined by PIXE and synchrotron XRF analysis systems, respectively. To assess the transport pathways of air parcels and to determine the spatial distribution of PM, the backward trajectories of the Meteorological Data Explorer (Center for Global Environmental Research, 2010) and the NOAA's HYSPLIT dispersion-trajectory models were applied. In line with general expectations, Si and other crustal elements in large size particles showed considerably higher mass loading on AD days in comparison with non-AD days. Computation of the crustal enrichment factors [(Z/Si)$_{particle}$/(Z/Si)$_{desert}$ sand] of elements in large size particles (> $1.2\;{\mu}m$) allowed us to estimate the source profile and chemical aging of AD particles as well as to classify the soil-origin elements. On the basis of a single particle analysis, individual AD particles are classified into three distinct groups (neutralized mineral particles, S-rich mineral particles, and imperfectly neutralized particles).

• Asian Journal of Atmospheric Environment
• /
• 제12권2호
• /
• pp.153-164
• /
• 2018

We measured $^1H$ and $^{13}C$ nuclear magnetic resonance (NMR) spectra of Humic-like substances (HULIS) in urban atmospheric aerosols isolated by diethylaminoethyl (DEAE) and hydrophilic-lipophilic balance (HLB) resin to characterize their chemical structure. HULIS isolated by DEAE resin were characterized by relatively high contents of aromatic protons and relatively low contents of aliphatic protons in comparison with HULIS isolated by HLB resin, while the contents of protons bound to oxygenated aliphatic carbon atoms were similar. These results were consistent with the results of the $^{13}C$ NMR analysis and indicate that hydrophobic components were more selectively adsorbed onto HLB, while DEAE resins selectively retained aromatic carboxylic acids. Furthermore, we demonstrated that the chemical structural features of HULIS were significantly different between spring and summer samples and that these disparities were reflective of their different sources. The estimated concentrations of HULIS in spring were found to be regulated by vehicle emissions and pollen dispersion, while the behavior of HULIS in summer was similar to photochemical oxidant and nitrogen dioxide concentrations. The proportion of aliphatic protons for summer samples was higher than that for spring samples, while the proportion of aromatic protons for summer samples was lower than that for spring samples. These seasonal changes of the chemical structure may also involve in their functional expression in the atmosphere.

• 한국세라믹학회지
• /
• 제23권6호
• /
• pp.37-44
• /
• 1986

Yttria-antimonia-stabilized zirconia was investigated with respect to the amount of $Sb_2O_3$ addition in the range of 0.5~5mole% to the base composition of $(ZrO)_{0.92}(Y_2O_3)_{0.08}$ The sinterbility modulus of rupture Vickers hardness evaporation of components phase form-tion and mcicrostructure were evaluated with antimonia content. Also two probe A. C conductivity measurement was subjected to all specimens and the best results are achieved with 1mol% $Sb_2O_3$ as a sinter agent and relative density of~98% obtained at 140$0^{\circ}C$ and this composition has a maximum electrical conductivity due to the possible substition of $Sb^{3+}$ for $Zr^{4+}$ site. The effect of $Sb_2O_3$ on the electrical conductivity of th bulk and the grain boundaries has on investigated using frequency dispersion analysis (5~106 Hz) Antimonia addition has a negative in-fluence on both the bulk and the grain boundary conductivity except for a 1 mon% addition. The additive antimonia has improve a modulus of rupture to 60~MPa due to metastable-tetragonal phase apparence and decrease the hardness with increasing the $Sb_2O_3$ content.

• 한국환경과학회지
• /
• 제20권8호
• /
• pp.953-962
• /
• 2011

The covered stream of cities are considered an odor source. Also, the public do not want a wastewater treatment plant(WWTP) near their properties due to the emission of odor emanating from such sources, although they play an important role in urban development. The purpose of this study is to analyze the pattern distribution of the odorous compounds from the Nambu WWTP and Youngho stream in Busan. odor sampled four times were analyzed by instrumental analysis method and indirect olfactory method. The kinds of offensive odorous compounds examined are acetaldehyde, propion aldehyde, hydrogen sulfide, methyl mercaptan, dimethyl sulfide and ammonia. Also, Concentration of air pollutants has been calculated by ISCST3 models. At the result of this study, The Nambu WWTP releases sulfur compounds. And the major odorous were hydrogen sulfide (1,475 ppb) and acetaldehyde (95 ppb) at Youngho stream. The stink which residents feel will point out the Nambu WWTP mainly if the odor is removed with the improvement of a Youngho stream. Accordingly, we should pay more attention to appropriate components to processes in odor reducing plan at Nambu WWTP.

• 대한치과기공학회지
• /
• 제40권3호
• /
• pp.125-131
• /
• 2018

Purpose: Automatic dental prosthesis manufacturing process was accelerated by the spread of dental CAD / CAM system. The CAD / CAM system with milling alloys were needed supplement. So, sintered alloy blocks were introduced. In this study, we want to study sintered alloy block. And to evaluate the alloy block manufacture and alloy properties. Methods: The alloy powders were prepared by high pressure water dispersion method. The sintered alloy blocks were prepared by low temperature pressing method. Their components observation were EDX, and the alloy structure was observed by XRD. Results: Co-Cr alloy powders were observed to have a circle shape with an average diameter of about $100{\mu}m$ and a Ni-Cr alloy powder had a circle shape with an average diameter of about $50{\mu}m$. The Co-Cr alloy block is composed of Co (34.62 wt%), Cr (17.33 wt%), Mo (2.98 wt%), Si (0.36 wt%) and C (44.17 wt%). The Ni-Cr alloy powder was composed of Ni (40.29 wt%), Cr (19.37 wt%), Mo (3.53 wt%), Si (0.52 wt%) and C (33.18 wt%). The peak of the Co and CoCr peaks were observed in the CoCr alloy body by the means of XRD study. Cr2Ni3 of the peak was observed in the Ni-Cr alloy material. Conclusion : As a result, the following conclusions were obtained. 1. Prepared by high-pressure water-law Co-Cr alloy powder has an average diameter $100{\mu}m$, Ni-Cr alloy powder was found to have the form of sphere having an average diameter $50{\mu}m$. 2. Co-Cr alloy and Ni-Cr alloy block produced by low-temperature processing showed a certain ratio. 3. In the XRD study, Co phase appeared in Co-Cr alloy block after sintering. and Cr2Ni3 phase appeared in Ni-Cr alloy block after sintering.