• Earthquakes and Structures
• /
• 제23권2호
• /
• pp.115-128
• /
• 2022

One common method to select input ground motions to predict dynamic behavior of structures subjected to seismic excitation requires spectral acceleration (S_a) match target mean response spectrum. However, dispersion of ground motions, which explicitly affects the structural response, is rarely discussed in this method. Generally, selecting ground motions matching target mean and variance has been utilized as an appropriate method to predict reliable seismic response. The goal of this paper is to investigate the impact of target spectra variance of ground motions on structural seismic response. Two sets of ground motions with different target variances (zero variance and minimum variance larger than inherent variance of the target spectrum) are selected as input to two different structures. Structural responses at different heights are compared, in terms of peak, mean and dispersion. Results show that increase of target spectra variance tends to increase peak floor acceleration, peak deformation and dispersions of response of interest remarkably. To short-period structures, dispersion increase ratios of seismic response are close to that of S_a of input ground motions at the first period. To long-period structures, dispersions of floor acceleration and floor response spectra increase more significantly at the bottom, while dispersion increase ratios of IDR and deformation are close to that of S_a of input ground motions at the first period. This study could further provide useful information on selecting appropriate ground motion to predict seismic behavior of different types of structures.

• Nuclear Engineering and Technology
• /
• 제45권7호
• /
• pp.979-986
• /
• 2013

Uranium metal particle dispersion plates have been proposed as targets for Molybdenum-99 (Mo-99) production to improve the radioisotope production efficiency of conventional low enriched uranium targets. In this study, uranium powder was produced by centrifugal atomization, and miniature target plates containing uranium particles in an aluminum matrix with uranium densities up to 9 $g-U/cm^3$ were fabricated. Additional heat treatment was applied to convert the uranium particles into UAlx compounds by a chemical reaction of the uranium particles and aluminum matrix. Thus, these target plates can be treated with the same alkaline dissolution process that is used for conventional $UAl_x$ dispersion targets, while increasing the uranium density in the target plates.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.198-198
• /
• 2006

SnO2가 첨가된 In2O3(ITO) sputtering 타켓은 넓은 파장영역에서의 투광성과 높은 전기전도도의 특성 때문에 여러 종류의 평판형 디스플레이 제품에 사용되고 있다. 사용된 In2O3와 SnO2 분말은 높은 순도의 금속을 사용하였으며, 공질법을 이용하여 분말을 제조하였으며, 혼합된 In2O3-SnO2 분말은 하소조건과 소결조건에 따라 특성을 평가 하였다. 본 연구의 목적인 ITO sprttering 타켓의 SnO2 분산조건은 하소 온도가 증가함에 따라 분산성이 뛰어났으며, 조사된 30wt% 에서 5wt%로 SnO2의 함량이 감소함에 따라 분산성은 향상되었다. 이러한 결과들로부터 ITO 타켓 밀도와 SnO2의 분산성은 1150C 이상에서 휘발하는 SnO2의 량에 의해 크게 영향을 받는다.

• 말소리와 음성과학
• /
• 제9권4호
• /
• pp.69-76
• /
• 2017

The current study investigated the productions of /ɨ/ and /${\Lambda}$/ in Kyungsang Korean, which is known for undergoing a dispersion for the younger generation. Specifically, to identify the nature of /ɨ/ and /${\Lambda}$/ in Kyungsang Korean, this study examined the linguistic and social factors affecting directions and degrees of the /ɨ/-/${\Lambda}$/ dispersion. Sixteen young speakers of Kyungsang Korean repeated 112 (near) minimal pairs containing the two target vowels. The formant values of each production as well as the Euclidean distance between the two vowels were analyzed for four manipulated factors: gender (male vs. female), the existence of carrier phrases (words in isolation vs. words with a carrier phrase), the lexical status of stimulus words (real-word pairs vs. nonsense-word pairs), and the vowel position within a word (word-initial positions vs. word-final positions). The results indicated that the female speakers produced the two target vowels more distinctively than the male speakers, and so did when the words were produced in isolation. The results also revealed that the Euclidean distances were greater for the real-word pairs and in word-initial positions. Overall, the results suggested that the Kyungsang Korean speakers in their 20s could distinctively produce the two vowels /ɨ/ and /${\Lambda}$/, but this vowel dispersion is not a completed process, but an ongoing one.

• 대한기계학회논문집A
• /
• 제40권5호
• /
• pp.457-467
• /
• 2016

본 연구에서는 입자완화 유체동역학기법을 이용하여 고속충돌에 의해 생성된 파편 및 파편운의 분산거동을 고찰하였다. 충격구와 표적판은 모두 알루미늄 소재를 대상으로 하였으며 해석을 통해 예측한 파편운의 장축 및 단축의 길이와 참고문헌의 실험값을 비교하여 기법의 타당성을 검증하였다. 검증된 SPH 기법을 기반으로 1.5~4 km/s의 속도 범위에서 고속충돌 및 파괴 해석을 수행하였으며 이에 따른 파편의 분산 거동을 운동에너지 관점에서 평가하였다. 표적판 뒤에 배치된 관측판상에 분포된 파편의 최대 분산반경은 충돌속도가 증가함에 따라 증가하였다. 충돌시 발생하는 파편의 분산 거동을 바탕으로 손상범위 예측을 위한 경험식을 도출하였고, 파편 운동에너지의 95 %는 최대분산반경의 50 % 이내에 집중됨을 확인하였다.

• 반도체디스플레이기술학회지
• /
• 제21권2호
• /
• pp.1-6
• /
• 2022

This computational investigation of micro-sized particle dispersion concerns the fume particle contamination over target surface in high-precision laser line machining process of semiconductor and display device materials. Employing the random sampling based on probabilistic fume particle generation distributions, the effects of sphericity for nonspherical fume particles are analyzed for the fume particle dispersion and contamination near the laser machining line. The drag coefficient correlation for nonspherical particles in a low Reynolds number regime is selected and utilized for particle trajectory simulations after drag model validation. When compared to the corresponding results by the assumption of spherical fume particles, the sphericity of nonspherical fume particles show much less dispersion and contamination characteristics and it also significantly affects the particle removal rate in a suction air flow patterns.

• 대한기계학회논문집A
• /
• 제41권11호
• /
• pp.1065-1075
• /
• 2017

본 연구는 고속충돌에 따른 파괴로 인하여 발생한 파편들의 분산거동을 예측하기 위해 고속충돌 실험과 함께 재료거동 모델링 및 수치해석을 수행하였다. 알루미늄 합금과 강철로 각각 구성된 2종류의 위협체 및 표적판에 대해 충돌실험을 수행하였으며 위협체는 약 1 km/s의 속력으로 표적판과 충돌하고, 이 충돌로 인하여 발생한 파편은 알루미늄 합금 관측판에 손상을 유발시키게 하였다. 사용된 소재의 차이에 의해 파편의 분산거동이 상이하였으며 이에 따라 관측판에 형성된 파편의 분산 반경 또한 다름을 확인하였다. 수치해석은 실험과 동일한 조건하에서 수행되었으며 파편으로 인한 파괴 및 손상을 모사하기 위하여 입자완화 유체동역학(smoothed particle hydrodynamics, SPH)기법과 유한요소(finite element, FE) 연계 기법을 적용하였다. 실험 측정된 결과와 해석값을 비교분석한 바, 표적판의 관통부 지름과 관측판상의 파편 분산반경은 5 % 이내의 오차로 잘 일치하였다. 아울러 강철 위협체와 강철 표적판이 충돌한 경우 가장 큰 분산반경을 보임에 따라 타 경우에 비해 가장 위협적임을 알 수 있었다.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.77-82
• /
• 2021

This numerical study focuses on the analysis of fume particle dispersion characteristics over the surface of target workpiece in laser micro-hole machining process. The effects of oblique stagnation flow over fume generating machining point are examined by carrying out a series of three-dimensional random particle simulations along with probabilistic particle generation model and particle drag correlation of low Reynolds number. Present computational model of fume particle dispersion is found to be capable of assessing and quantifying the fume particle contamination in precision hole machining which may influenced by different types of air flow patterns and their flow intensity. The particle size dependence on dispersion distance of fume particles from laser machining point is significant and the effects of increasing flow oblique angle are shown quite differently when slot blowing or slot suction flows are applied in micro-hole machining.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.172-176
• /
• 2007

In this study, the numerical model for simulation of tsunamis is constructed by using the dispersion-correction scheme, 2nd upwind scheme, dynamic linking method, and so forth. The composed numerical model is used to simulate a hitorical tsunami event. The target tsunami event is the 1983 Central East Sea Tsunami. And, the predicted run-up heights of the tsunami at Imwon port are very reasonable compared to available observed data.

• Asian Journal of Atmospheric Environment
• /
• 제9권4호
• /
• pp.272-279
• /
• 2015

The information about the dispersion and scavenging of traffic-related pollutants at the locations near busy expressways is very helpful to highway planners for developing better plans to reduce exposures to air pollution for people living as well as children attending schools and child care centers near roadways. The objective of the current study was to give information in the dispersion and scavenging of vehicle-derived pollutants at the region near a busy urban expressway by a combination of two different model calculations. The modified Gaussian dispersion model and the Lagrange type below-cloud scavenging model were applied to evaluate $NO_x$ dispersion and DEP (Diesel exhaust particles) wet removal, respectively. The highest $NO_x$ was marked 53.17 ppb within 20-30 meters from the target urban expressway during the heaviest traffic hours (08:00AM-09:00AM) and it was 2.8 times higher than that of really measured at a nearby ambient measuring station. The calculated DEP concentration in size-resolved raindrops showed a continuous decreasing with increasing raindrop size. Especially, a noticeable decrease was found between 0.2 mm and 1.0 mm raindrop diameter.