• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.247-251
• /
• 2001

Nowadays, base isolation systems such as lead-rubber bearing, elastomer bearing and sliding bearing have been installed to the various structures to prevent the disaster from seismic. The performance of base isolation system have been well proved by model-scale experiments and numerical analysis. However. the seismic response data measured at real large base-isolated structures is still insufficient. This paper presents a seismic monitoring system, acquiring real-time acceleration signals up to 32 channels, displaying time history and spectrum of the signals, storing the acquired data at a PC hard disk, and replaying the saved data. Moreover, the system can be operated without any limitation for monitoring period by automatic management of stored data file. The developed system has been installed at a real base-isolated building using lead-rubber bearings and we expect its seismic response data with ground motion signal can be well licquired in case of earthquake occurrence.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.127-132
• /
• 2000

Morphological analysis of wear particles is one of useful methods for machine condition monitoring because it is well reflected in machine driving state. This paper was undertaken to apply to the condition monitoring of hydraulic piston motor. The lubricating wear test was performed under different experimental conditions using the wear test device and wear specimens of the pin on disk type was rubbed in paraffinic base oil by three kinds of lubricating materials, varying applied load, sliding distance. The four shape parameters(50% volumetric diameter, aspect, roundness and reflectivity) are used for morphological analysis of wear particles. The results showed that the four shape parameters of wear particles depend on a kind of the lubricating materials. It was capable of calculating presumed wear volume for three kinds of materials on driving time to foresee as damage condition of lubricating materials.

• 천문학논총
• /
• 제23권2호
• /
• pp.47-52
• /
• 2008

We have performed the flat-fielding correction for the $H{\alpha}$ full-disk monitoring system of KASI (Korea Astronomy and Space Science Institute), which is installed in the Solar Flare Telescope (SOFT) at the top of Bohyun Mountain. For this, we used a new method developed by Chae (2004), to determine the flat pattern from a set of relatively shifted images. Using this method, we successfully obtained the flat pattern for $H{\alpha}$ full-disk observations and compared our result with the image observed in Catania Astrophysical Observatory. The method that we used in this study seems to be quite powerful to obtain the flat image for solar observations. In near future, we will apply this method for the flat-fielding correction of all solar imaging instruments in KASI.

• 천문학회보
• /
• 제38권1호
• /
• pp.52.1-52.1
• /
• 2013

We present preliminary results of the photometric variability analysis in SDSS r, i and z bands for a newly confirmed FU Orionis-type object, HBC 722. We observed HBC 722 from 2011 April to 2012 November, with Camera for Quasars in Early uNiverse (CQUEAN) attached to the 2.1m Otto Struve telescope at McDonald Observatory, USA. The rapid cadence monitoring observations (minute timescale) were conducted in chosen photometric nights during observation campaigns to get adequate number of samples for short term period analysis. As this object is in active state, temperature at the inner disk/stellar surface can be characterized by the colors between r, i and z bands. Also, It is theorized that a sudden cataclysmic accretion associated with FU Orionis-type outburst can give rise to detectable "hot spots" on the central star and rotational asymmetries in the disk instability region. Thus the periodic variabilities of three bands would trace the stellar rotation or Keplerian rotation at the instability region of the inner accretion disk. Additionally, the range of instabilities could be estimated on the assumption of a temperature distribution for the HBC 722 disk. This analysis can provide a clue for understanding enhanced disk accretion of Class II young stellar object.

• 한국대기환경학회지
• /
• 제29권2호
• /
• pp.217-227
• /
• 2013

Passive air samplers (PAS) have been developed since the early 2000s and widely used for the atmospheric monitoring of persistent organic pollutants (POPs). PAS are useful especially for the investigation of source-receptor relationship of POPs because they provide higher spatial resolution data. In Korea, however, only a few research groups have conducted POPs monitoring using PAS. One of the reasons for the limited application of PAS might be due to a complicated calculation method for air concentration. In this study, therefore, we introduced the principle of polyurethane foam (PUF)-PAS, which has been most widely used in the world, and provided an example of the calculation of air concentration of polycyclic aromatic hydrocarbons (PAHs). As all data tables and equations for this calculation were provided, this method can be used for the conversion of the amount of POPs (ng) in a PUF disk to air concentration ($ng/m^3$).

• Tribology and Lubricants
• /
• 제12권3호
• /
• pp.72-78
• /
• 1996

This paper was undertaken to analyze the morphology of wear debris generated from lubricated moving machine surfaces by image processing. The lubricati, ng wear test was performed under different experimental conditions using the wear test device made in our laboratory and wear test specimen of the pin on disk type wear rubbed in paraffme series base oil, by varying applied load, sliding distance. The four parameters (50% volumetric diameter, aspect, roundness and reflectivity) to describe the morphology have been developed and outlined in the paper. A system using such techniques promises to obviate the need for subjective, human interpretation of particle morphology in machine condition monitoring, thus to overcome many of the difficulties with current methods and to facilitate wider use of wear particle analysis in machine condition monitoring.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.563-567
• /
• 1996

This paper was undertaken to analyze the morphology of wear debris generating from moving lubricated machine surfaces by image processing. The lubricating wear test was carried out under different experimentaal conditions using the wear test device was made in our laboritory and wear testing specimen of the pin on disk type wear rubbed in paraffine series base oil, byvarying applied load, sliding distance. The four parameters(50% volumetric diameter, aspect, roundness and reflectivity) to describe the morphology have been developed and are outlined in the paper. A system using such techniques promises to obviate the need for subjective, human interpretation of particle morphology in machine condition monitoring, thus overcoming many of the difficulties with current methods and facilitating wider use of wear particle analysis in machine condition monitoring.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1996년도 제23회 학술대회
• /
• pp.76-82
• /
• 1996

This paper was undertaken to analyze the morphology of wear debris generating from moving lubricated machine surfaces by image processing. The lubricating wear test was carried out under different experimental conditions using the wear test device was made in our laboritory and wear testing specimen of the pin on disk type wear rubbed in paraffine series base oil, by varying applied load, sliding distance. The four parameters(50% volumetric diameter, aspect, roundness and reflectivity) to describe the morphology have been developed and are outlined in the paper. A system using such techniques promises to obviate the need for subjective, human interpretation of particle morphology in machine condition monitoring, thus overcoming many of the difficulties with current methods and facilitating wider use of wear particle analysis in machine condition monitoring.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2004년도 춘계학술발표대회
• /
• pp.899-902
• /
• 2004

임베디드 시스템은 현재 가전, 단말, 제어, 통신등 다양한 분야에서 응용되고 있으며 컴퓨터 관련 기술의 발전과 더불어 응용분야는 더욱 넓어질 것이다. 이러한 임베디드 시스템의 관리나 테스트를 위해 모니터링 프로그램이 필요하다. 임베디드 시스템은 일반 PC 시스템과 달리 많은 제약을 가지고 있다. 본 논문에서는 자원적 제약을 가진 임베디드에 활용되어지는 NFS를 이용한 임베디드 장비 모니터링에 적합한 MONETA(distributed MONitoring for Embedded TArget system)를 설계, 구현하였다. MONETA에서 제시하는 구조는 모니터링을 위한 서버, 모니터링하는 대상인 클라이언트, 시스템 사용자의 3계층 구조의 분산 모니터링 시스템으로 각 장비별 CPU, Moemory, Disk, 트래픽량을 그래프로 나타도록 구현된다.

• 정보보호학회논문지
• /
• 제7권3호
• /
• pp.3-10
• /
• 1997

Computer viruses are increasing in number and are continually intellectualized as well. To cope with this problem, anti-virus tools such as a scanner and the monitoring program have been developed. But it is not guaranteed that these softwares will work in safety under MS-DOS' control. If the virus is run first, it can avoid the monitoring of anti-virus software or even can attack the anti-virus software. Therefore, anti-virus programs should be run before the system is infected. This paper presents a new PC starting mechanism which allows the PC system to start from a clean state after booting. For this mechanism, we build a new disk file system different from DOS' file system, and manage the two file systems heterogeneously. Our system is strong against boot viruses and recovers from infections automatically.