• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.572-583
• /
• 2019

This paper aims to assess the applicability of the Runge Kutta Discontinuous Galerkin-Direct Ghost Fluid Method to the internal explosion inside a water-filled tube, which previously was studied by many researchers in separate works. Once the explosive charge located at the inner center of the water-filled tube explodes, the tube wall is subjected to an extremely high intensity fluid loading and deformed. The deformation causes a modification of the field of fluid flow in the region near the water-structure interface so that has substantial influence on the response of the structure. To connect the structure and the fluid, valid data exchanges along the interface are essential. Classical fluid structure interaction simulations usually employ a matched meshing scheme which discretizes the fluid and structure domains using a single mesh density. The computational cost of fluid structure interaction simulations is usually governed by the structure because the size of time step may be determined by the density of structure mesh. The finer mesh density, the better solution, but more expensive computational cost. To reduce such computational cost, a non-matched meshing scheme which allows for different mesh densities is employed. The coupled numerical approach of this paper has fewer difficulties in the implementation and computation, compared to gas dynamics based approach which requires complicated analytical manipulations. It can also be applied to wider compressible, inviscid fluid flow analyses often found in underwater explosion events.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.311-317
• /
• 2011

The present paper deals with the continuous works of extending the multi-dimensional limiting process (MLP) for compressible flows, which has been quite successful in finite volume methods, into discontinuous Galerkin (DG) methods. From the series of the previous, it was observed that the MLP shows several superior characteristics, such as an efficient controlling of multi-dimensional oscillations and accurate capturing of both discontinuous and continuous flow features. Mathematically, fundamental mechanism of oscillation-control in multiple dimensions has been established by satisfaction of the maximum principle. The MLP limiting strategy is extended into DG framework, which takes advantage of higher-order reconstruction within compact stencil, to capture detailed flow structures very accurately. At the present, it is observed that the proposed approach yields outstanding performances in resolving non-compressive as well as compressive flaw features. In the presentation, further numerical analyses and results are going to be presented to validate that the newly developed DG-MLP methods provide quite desirable performances in controlling numerical oscillations as well as capturing key flow features.

• 한국해안·해양공학회논문집
• /
• 제32권6호
• /
• pp.569-574
• /
• 2020

천수방정식에 대한 불연속 갤러킨 기법 (DG)은 주로 양해법 기반으로 개발되어 적용되어 왔으나, 바닥마찰항의 처리, 과도한 CFL 조건 등의 불리한 점이 지적되어 왔다. 이에 대한 대안으로써, 본 연구에서는 음해법 기반의 모형을 개발하고 이를 적용하여 향후 가능성을 입증하였다. 본 논문에서 연구한 사례에서는 선형 삼각형 요소를 사용하였고, 수치흐름률로서 Roe 흐름률을 이용하였으며, TVD 특성 보존을 위한 기울기 제한자를 적용하였다. 적용 사례로서 실린더 주변의 흐름과 댐 붕괴류 문제 등에 대하여 적용하고, 기존의 실험치, 수치해와 비교하여 잘 일치함을 확인하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.43-46
• /
• 2005

Micro molding technology is a promising mass production technology for polymer based microstructures. Mass production technologies such as the micro injection/compression molding, hot embossing, and micro reaction molding are already in use. In the present study, we have developed a numerical analysis system to simulate three-dimensional non-isothermal cavity filling for hot embossing, with a special emphasis on the free surface capturing. Precise free surface capturing has been successfully accomplished with the level set method, which is solved by means of the Runge-Kutta discontinuous Galerkin (RKDG) method. The RKDG method turns out to be excellent from the viewpoint of both numerical stability and accuracy of volume conservation. The Stokes equations are solved by the stabilized finite element method using the equal order tri-linear interpolation function. To prevent possible numerical oscillation in temperature Held we employ the streamline upwind Petrov-Galerkin (SUPG) method. With the developed code we investigated the detailed change of free surface shape in time during the mold filling. In the filling simulation of a simple rectangular cavity with repeating protruded parts, we find out that filling patterns are significantly influenced by the geometric characteristics such as the thickness of base plate and the aspect ratio and pitch of repeating microstructures. The numerical analysis system enables us to understand the basic flow and material deformation taking place during the cavity filling stage in microstructure fabrications.

• 한국전산유체공학회지
• /
• 제12권4호
• /
• pp.14-19
• /
• 2007

We present a direct numerical simulation technique and some preliminary results of the capillary spreading of a droplet containing particles on the solid substrate. We used the level-set method with the continuous surface stress for description of droplet spreading with interfacial tension and employed the discontinuous Galerkin method for the stabilization of the interface advection equation. The distributed Lagrangian-multipliers method has been combined for the implicit treatment of rigid particles. We investigated the droplet spreading by the capillary force and discussed effects of the presence of particles on the spreading behavior. It has been observed that a particulate drop spreads less than the pure liquid drop. The amount of spread of a particulate drop has been found smaller than that of the liquid with effectively the same viscosity as the particulate drop.

• Wind and Structures
• /
• 제34권1호
• /
• pp.59-72
• /
• 2022

In this work the numerical results of the flow around a 5:1 rectangular cylinder at Reynolds numbers 3 000 and 40 000, zero angle of attack and smooth incoming flow condition are presented. Implicit Large Eddy Simulations (ILES) have been performed with a high-order accurate spatial scheme and an implicit high-order accurate time integration method. The spatial approximation is based on a discontinuous Galerkin (dG) method, while the time integration exploits a linearly-implicit Rosenbrock-type Runge-Kutta scheme. The aim of this work is to show the feasibility of high-fidelity flow simulations with a moderate number of DOFs and large time step sizes. Moreover, the effect of different parameters, i.e., dimension of the computational domain, mesh type, grid resolution, boundary conditions, time step size and polynomial approximation, on the results accuracy is investigated. Our best dG result at Re=3 000 perfectly agrees with a reference DNS obtained using Nek5000 and about 40 times more degrees of freedom. The Re=40 000 computations, which are strongly under-resolved, show a reasonable correspondence with the experimental data of Mannini et al. (2017) and the LES of Zhang and Xu (2020).

• 대한토목학회논문집
• /
• 제34권5호
• /
• pp.1383-1393
• /
• 2014

최근, 급속한 컴퓨터 하드웨어의 성능 향상과 전산유체역학 분야의 이론적 발전으로, 고차 정확도의 수치기법들이 계산수리학 분야에 적용되어 왔다. 본 연구에서는 1차원 천수방정식에 대한 수치 해법으로 TVD Runge-Kutta 불연속 갤러킨(RKDG) 유한요소법을 적용하였다. 대표적인 천이류(transcritical flow)의 예로 순간적인 댐 붕괴에 의한 댐 붕괴류(dam-break flow) 흐름과 지형변화에 의한 천이류를 모의하였다. 리만(Riemann) 근사해법으로 로컬 Lax-Friedrichs (LLF), Roe, HLL 흐름률(flux) 기법을 사용하였고, 불필요한 진동을 제거하기 위하여, 기울기 제한자로서 MUSCL 제한자를 사용하였다. 개발된 모델은 1차원 댐 붕괴류와 천이류에 적용하였다. 수치해석 결과는 해석해, 수리실험 결과와 비교하였다.

• Coupled systems mechanics
• /
• 제8권1호
• /
• pp.71-93
• /
• 2019

Finite element simulations of solid mechanics problems often involve the use of Non-Confirming Meshes (NCM) to increase accuracy in capturing nonlinear behavior, including damage and plasticity, in part of a solid domain without an undue increase in computational costs. In the presence of material nonlinearity and plasticity, higher-order variables are often needed to capture nonlinear behavior and material history on non-conforming interfaces. The most popular formulations for coupling non-conforming meshes are dual methods that involve the interpolation of a traction field on the interface. These methods are subject to the Ladyzhenskaya-Babuska-Brezzi (LBB) stability condition, and are therefore limited in their implementation with the higher-order elements needed to capture nonlinear material behavior. Alternatively, the enriched discontinuous Galerkin approach (EDGA) (Haikal and Hjelmstad 2010) is a primal method that provides higher order kinematic fields on the interface, and in which interface tractions are computed from local finite element estimates, therefore facilitating its implementation with nonlinear material models. The inclusion of higher-order interface variables, however, presents the issue of preserving material history at integration points when a increase in integration order is needed. In this study, the enriched discontinuous Galerkin approach (EDGA) is extended to the case of small-deformation plasticity. An interface-driven Gauss-Kronrod integration rule is proposed to enable adaptive enrichment on the interface while preserving history-dependent material data at existing integration points. The method is implemented using classical J2 plasticity theory as well as the pressure-dependent Drucker-Prager material model. We show that an efficient treatment of interface variables can improve algorithmic performance and provide a consistent approach for coupling non-conforming meshes in inelasticity.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.373-379
• /
• 2001

There is a big issue to generate 3D hexahedral finite element (FE) model, since a process to divide the whole domain into several simple-shaped sub-domains is required before generating a continuous mesh with mapped mesh generators. In general, it is nearly impossible to set up proper division numbers interactively to keep mesh connectivity between sub-domains on a complicated arbitrary-shaped domain. If mesh continuity between sub-domains is not required in an analysis, this complicated process can be omitted. Element-free Galerkin method (EFGM) can accept discontinuous meshes, which only requires nodal information. However it is difficult to choose a reasonable influenced domain in moving least squares scheme with non-uniformly distributed nodes in discontinuous FE models. A new FE scheme fur discontinuous mesh is proposed in this paper by applying improved EFGM with some modification to derive FE approximated function in discontinuous parts. Its validity is evaluated on linear elastic problems.

• 한국전산유체공학회지
• /
• 제19권3호
• /
• pp.52-61
• /
• 2014

The present paper deals with the efficient computation of higher-order CFD methods for compressible flow using graphics processing units (GPU). The higher-order CFD methods, such as discontinuous Galerkin (DG) methods and correction procedure via reconstruction (CPR) methods, can realize arbitrary higher-order accuracy with compact stencil on unstructured mesh. However, they require much more computational costs compared to the widely used finite volume methods (FVM). Graphics processing unit, consisting of hundreds or thousands small cores, is apt to massive parallel computations of compressible flow based on the higher-order CFD methods and can reduce computational time greatly. Higher-order multi-dimensional limiting process (MLP) is applied for the robust control of numerical oscillations around shock discontinuity and implemented efficiently on GPU. The program is written and optimized in CUDA library offered from NVIDIA. The whole algorithms are implemented to guarantee accurate and efficient computations for parallel programming on shared-memory model of GPU. The extensive numerical experiments validates that the GPU successfully accelerates computing compressible flow using higher-order method.