• Journal of Advanced Marine Engineering and Technology
• /
• 제32권5호
• /
• pp.730-736
• /
• 2008

The purpose of this study is to find out a flow characteristics when a crossflow-fan is installed inside the computer case and to provide information about the preliminary data of cooling efficiency of CPU and a flow inside and outside of a computer case. Under the condition of operating the fan inside the experimental duct we changed the position of a installation of the slot, and the experiment measured with PIV and the results are as follows. Under the influence of the crossflow-fan installed to the air discharging side, mean velocity between 35 to 45 on the point 80 of the Slot 0.2.3 of the case increased and it influences discharging the air inside of the computer case. On the left-upper end. which isn't directly influenced by the suction-discharging fan installed inside the PC, a flow occurs caused by vortex due to the Sirocco-Fan and Slot installed on the center of the right side. We can see that a flow distribution increases when the Sirocco-Fan operates and a whirl appears stronger between the slot and the suction fan. It is thought that this phenomenon is influenced by a flow while it is on the way of entering from the suction-fan and going out to the discharging-fan.

• 한국정보통신학회논문지
• /
• 제8권1호
• /
• pp.158-169
• /
• 2004

독립전원으로 널리 사용되고 있는 납 축전지는 도서산간 벽지나 태양광을 이용하는 가로등 시스템과 같이 관리자가 없는 곳에서는 과 방전으로 납 축전지의 수명이 급격히 단축되어 고가의 시스템을 효율적으로 용하지 못하는 사례가 많이 발생한다. 이렇게 관리가 잘 되지 않는 곳에 설치된 납 축전지의 문제점인 과 방전을 방지하여 납 축전지의 수명단축을 예방하고자 마이크로프로세서를 사용한 효율적인 관리 시스템을 구축하였다. 제안된 관리시스템은 납 축전지의 충$.$방전 시 전류의 특성을 제어에 이용하였으며, 시스템 작동 중에는 납 축전지의 현재 잔량을 표시하여 관리자가 잔량을 표시할 수 있도록 하였다.

• 재활간호학회지
• /
• 제1권1호
• /
• pp.73-82
• /
• 1998

This study, whose subjects are forty stroke patients in discharging who have been using FIM Western medical (Neurology, Neurosurgery, Rehabilitation Medicine) and Chinese herb medical base of D Hospital in Pusan from the first of May to the eleventh of July, has been made to evaluate the patients' functional conditions and analyze the factors affecting them. The result of study is as followings: FIM total score in discharging is avarage $85.83{\pm}28.96$; the motor FIM score is $57.55{\pm}24.40$ and the cognitive FIM score $29.95{\pm}6.99$. The items recorded the highest score reveal the eating bowel management; the former is $5.68{\pm}1.73$, the latter $5.33{\pm}2.23$. The item recorded the lowest score reveal bathing and stairs, each $2.35{\pm}1.69$ and $3.23{\pm}2.13$. Analysis reveal it is in the case of age(p=.005) and durations of admission(p=.01) that there is significant difference of FIM score when stroke patients in discharging.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.9-12
• /
• 2010

본 논문은 연료 과농 연소 환경 하의 이중 와류 동축형 분사기의 유량 통과 특성 파악을 위해 수행한 실험결과를 수록하였다. 액체산소와 케로신(Jet A-1)을 사용하여 연소시험을 수행하고 유량 통과 특성을 유량계수로 표현하였다. 유량계수 산출을 위해 유량, 압력, 온도를 계측하였다. 연료 분사기의 경우, 산화제 측 분사기 형상, 연소압, 혼합비에 관계없이 일정한 유량 계수 값을 보였다. 이에 반해 산화제 분사기는 연소압과 혼합비 변화에 영향을 받는 것으로 나타났다. 화염 형성 변화가 유량계수 변화에 특히 산화제 측에 영향을 주고 있음을 밝혔다.

• 전력전자학회논문지
• /
• 제19권4호
• /
• pp.383-390
• /
• 2014

This paper deals with novel soft-switching method for a bidirectional DC-DC converter in battery charging and discharging system. The proposed soft-switching method provides ZVS and ZCS at turn-on, and ZVS at turn-off of the switch in both charging and discharging operation modes. The soft switching condition can be obtained in wide load range, and provide low switching loss as well as low voltage spike at turn-off of the switch. Proposed method is analyzed in charging and discharging mode. Simulation and experimental results validate the usefulness of the proposed soft-switching method.

• 문화기술의 융합
• /
• 제7권1호
• /
• pp.551-557
• /
• 2021

전기자동차의 증가에 따라 공공장소의 전기자동차 충방전 기반시설 또한 급격히 늘어나고 있다. 전기자동차의 충방전을 위해서는 보안상의 취약점을 최소화하기 위해 전기자동차와 서비스 제공자가 서로의 신원을 확인하는 상호인증과정 후에 층방전 서비스를 시작하여야 한다. 본고에서는 해쉬함수와 메시지 인증코드를 사용하여 전기자동차와 충방전 서비스 제공자간의 양방향 인증 방법을 제안한다. 그리고 효율적인 충방전 시스템의 운영에 대해 기술한다. 제안된 시스템은 외부로 부터의 공격에 강한 내성을 가지며 충방전 서비스 이용자의 개인정보를 효과적으로 보호할 수 있다.

• 한국산업융합학회 논문집
• /
• 제24권6_1호
• /
• pp.669-681
• /
• 2021

As the supply of xEV in Korea is rapidly increasing, the amount of waste batteries is expected to increase rapidly, but the current recycling system for waste xEV batteries is very insufficient. In order to properly utilize the xEV reusable battery module, it is essential to classify it into a type that has similar discharge characteristics to the current state of health(SOH), which is the discharge capacity of the battery. This paper proposes a system that can minimize the exchange of energy with the KEPCO system by using the charging/discharging method by circulating power between batteries in order to minimize the power consumption when charging and discharging waste batteries. In the proposed system, a function to measure parameters during the charging/discharging test of the waste battery was implemented to build a customized big date for the test waste battery. In addition, the dynamic characteristics of the proposed circuit were analyzed using PSIM, which is useful for power electronics analysis, and the validity of the proposed circuit was verified through experiments.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.49-57
• /
• 2013

In this study, we fabricated a parallelly connected Li-ion battery/supercapacitor hybrid cell to combine the advantageous characteristics of Li-ion battery and supercapacitor, high energy density and high power density, respectively, and investigated its discharging characteristics over a wide temperature range from -40 to $25^{\circ}C$. At the initial state of discharging of the hybrid cell, the power was mostly provided by the supercapacitor and then the portion of the Li-ion battery was gradually increased. By installing a switching system into the hybrid cell, which controls the discharging sequence of Li-ion battery and supercapacitor, the maximum power was improved by 40% compared with non switching system. In addition at low temperatures, the power and discharging time of the hybrid cell were significantly enhanced compared to a battery-alone system. The hybrid cell is expected to be applied in electric vehicles and small domestic appliances that require high power at initial discharging state.

• 한국농공학회지
• /
• 제18권4호
• /
• pp.4218-4225
• /
• 1976

To insure the safety of the drainage sluice, topogrophical change due to erosion as well as capability of discharging the design flow in a very important factor. In consideration of the fact that the drainage sluice is built in the sea, its construction has many topographically restricted problems and naturally requires a completeness of research and experiment. This thesis is a comparative and analytic study of discharging flow acting on the erosion at the bottom of the structure on the basis of the measured velocity on the downstream channel of the drainage sluice. (1) The measured velocity shows a little higher values than the computed velocity, because the measured velocity was observed at the surface of the stream. There fore, it is reasonable that the compated velocity should be taken in this study. (2) The field observation was conducted to have the measurement of the flow velocity without surveying the area of flow. Therefore, the coefficient of discharge could not be computed. The survey of the area of flow is planned to be conducted along with the measurement of the flow velocity. (3) The apron of the drainage sluice is free discharging type and it was designed to be about 80m in length less than it should be. (4) The apron of free flow discharging type should have a solid foundation to protect the structure by preventing erosion damage to upstream and downstream channels against weathering of rock and strong torrent. Whether free flow discharging type or energy-dissipating type is best chosen depends on the topographical condition of the forage site, therefore, there would be a comparative study before the final decision was made about the protrection for the structure. (5) It is considered to be appropriate that the design and construction of the drainage sluice should have a complete study which is based on hydraulie model test before the type of protection is decided. (6) It is much requested that a variety of experiment equipments be installed and observed to study the protection for the drainage sluice.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.803-811
• /
• 2014

The moment when Electrical Vehicle (EV) starts charging or discharging is one of the most important parameters in estimating the impact of EV load on the grid. In this paper, a decision-making problem of determining the start time of charging and discharging during allowed period is proposed and studied under the uncertainty of real-time price. Prospect theory is utilized in the decision-making problem of this paper for it describes a kind of decision making behaviors under uncertainty. The case study uses the parameters of Springo SGM7001EV and adopts the historical realtime locational marginal pricing (LMP) data of PJM market for scenario reduction. Prospect values are calculated for every possible start time in the allowed charging or discharging period. By comparing the calculated prospect values, the optimal decisions are obtained accordingly and the results are compared with those based on Expected Utility Theory. Results show that with different initial State-of-Charge ($SoC_0$) and different reference points, the optimal start time of charging can be the one between 12 a.m. to 3 a.m. and optimal discharging starts at 2 p.m. or 3p.m. Moreover, the decision results of Prospect Theory may differ from that of the Expected Utility Theory with the reference points changing.