• 한국진공학회지
• /
• 제16권5호
• /
• pp.383-387
• /
• 2007

본 논문에서는 KSTAR 토카막 진공용기의 세정을 위한 방전세정 시스템의 설계에 대해 기술하였다. 먼저 방전세정효율에 영향을 주는 매개변수들에 대해 논의하였으며. 실제 설계에서 직류방전 보다 낮은 압력에서 방전이 시작되고 유지되며 따라서 세정효율이 높은 RG 방전(RF-assisted DC glow discharge) 방법을 채택하였다. 그리고 방전세정의 균일성을 위해 두 개의 방전 전극을 진공용기의 진단포트(A,I-port)에 설치하였다. 설계된 방전세정 시스템은 KSTAR 진공용기 내벽 세정뿐만 아니라 제1벽의 연료재순환(fuel recycling)이나 보론화 처리(boronization)등의 연구에도 응용될 수 있다.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.39-47
• /
• 2006

Recent trend in pursuit of high performance and effectiveness for automotive cooling system has changed the application of material for impeller of automotive water pump from metal to high ability engineering resin, which can achieve optimization of design of impeller geometry and realize lightweight high efficiency water pump. Closed type water pump improves hydraulic loss of fluid through the clearance between volute casing and impeller compared with that of the existing open type water pump(Although closed type is heavier than open type for the same size and same material, adoption of plastics can solve the problem.). In the present study, the characteristics of hydraulic performance of closed type water pump were investigated with respect to the angle between shroud and hub of impeller and the shape of discharge port of volute casing. Performance tests were carried out for 4 cases, that is, for 2 impellers and 2 casings. The modification of shape of only discharge port can enhance the hydraulic performance by 10 percent and the pump efficiency by 4-6 percent.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.163-170
• /
• 2008

Auxiliary port which had been known to be used to reduce the expansion loss of a refrigeration system was applied to a R134a reciprocating compressor in a household refrigerator cycle with an intention of improving the compressor performance. Effects of the auxiliary port on the compressor performance was investigated by a computer simulation program. When a simple hole was made on the side wall of the cylinder as an auxiliary port and surrounding gas inside the compressor shell was assumed to be drawn into the cylinder through the hole, maximum COP improvement of 1.66% was obtained. With auxiliary port equipped with a plate type of check valve, maximum COP was raised to be 1.99%. COP improvement was more distinctive with decreasing the discharge pressure; COP improvement was 5% with discharge pressure of 7 bar.

• 설비공학논문집
• /
• 제20권10호
• /
• pp.637-644
• /
• 2008

Auxiliary port which had been known to be used to reduce the expansion loss of a refrigeration system was applied to a R134a reciprocating compressor in a household refrigerator cycle with an intention of improving the compressor performance. Effects of the auxiliary port on the compressor performance was investigated by a computer simulation program. When a simple hole was made on the side wall of the cylinder as an auxiliary port and surrounding gas inside the compressor shell was assumed to be drawn into the cylinder through the hole, maximum COP improvement of 1.66% was obtained. With auxiliary port equipped with a plate type of check valve, maximum COP was raised to be 1.99%. COP improvement was more distinctive with decreasing the discharge pressure; COP improvement was 5% with discharge pressure of 7 bar.

• 수산해양기술연구
• /
• 제26권1호
• /
• pp.26-33
• /
• 1990

연안해역에 저밀도 Froude수의 액체를 방류할 때 인근해역에 미치는 영향을 저감하기 위해서, 중력분류의 혼합\ulcorner희석특성을 알아보았다. 연직방향방류시 밀도 Froude수가 작은 것이 분류의 퍼짐폭이 증대하여 방류수의 혼합\ulcorner희석이 활발해진다. 수평방향방류시 밀도 Froude수가 클수록 혼합\ulcorner희석효과가 증대된다. 수평방향방류가 연직수평방류보다 혼합희석효과가 뛰어나다. 수평방향방류시 다공관으로 방류하는 것이 단공관의 경우 보다 효과적이다. 이는 방류수를 분산시켜 방류함으로서 주위수와 접하는 표면적이 증대되기 때문이다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 춘계학술대회논문집
• /
• pp.91-98
• /
• 2000

Derivation of stage-discharge relationship and characteristics for Yangsan river is presented in this paper. This research has been conducted as the second one after the first trial of 1997. The determination of discharge at a Yangsan river gauging was best made by measuring the flow velocities with a current meter and rod float. The rating curve obtained through 52 stage-discharge measurements on Yangsan river basin in 1999 is represented by Q=15.3540-140.6076H+182.44372$H^2$, which is discovered to be most excellent among other curves in reliability analysis. The capability of the observed stage-discharge data for Yangsan river was tested by HEC-RAS program, and its capability to reproduce discharge was investigated and compared with the computational results. Rating curve stability is determined on the basis of deviations in the stage-discharge relationship, utilization of specific gauge, and absolute differences between sequential stream flow measurements and an analysis residuals. Therefore it seems necessary to research method to obtain rating curve in a rigorous and accurate manner.

• 소음진동
• /
• 제10권4호
• /
• pp.615-622
• /
• 2000

Discharge valve mechanism for an electrodynamic-oscillating compressor is different from that of a conventional reciprocating compressor. It has a larger discharge port area, heavier valve mass and stiffer valve spring comparing with the reciprocating one. Since the motion of piston is not kinematically restricted as in conventional reciprocating compressors, the stroke of the piston can change sensitively with supplied boltage and load. Thus piston can impact with discharge valve occasionally. This work deals on dynamic analysis of discharge valve considering all of those different characteristics. Impact is considered by a spring-mass model, and the pressure fluctuation at the both sides of the valve is also included considering the discharge port area and valve spring preload. It is assumed that piston moves in the region of between top and bottom dead center not by calculating piston motion from an electrodynamic equation but by getting values through experiment. Discharge pressure fluctuation is calculated using Helmholtz modeling. Finally, dynamic model for a discharge valve is constructed. In order to validate the model analysis results, the valve motion is experimentally measured and compared with analysis.

• 한국항만학회지
• /
• 제12권1호
• /
• pp.131-143
• /
• 1998

This paper presents derivation of stage-discharge curve for Yangsan river. To derivate of stage-discharge lationship is one of the essential research areas in the water resource field. It provides reliable data a long term planning and hydrologic quantity on water resource development by quantitative analysis. The rating curve derivated through 15 discharge-observation on Yangsan river basin in 1997 has been estimated Q=1283.0262-1553.3158H+477.2702H2. According to the rating curve, the highest water level 2.6m, the limited water-level should be bound to the maximum of 2.6m. Before this research, stage-discharge curve of Yangsan river has not been developed, and only 15 discharge observation(hydrometry) has been carried out though this research. Therefore it seems necessary to collect observation data through a long term process to obtain a reliable rating curve equation.

• 한국해양공학회지
• /
• 제32권3호
• /
• pp.192-201
• /
• 2018

In this study, a qualitative evaluation of the morphological changes in the seabed surrounding Jinwoo-Island due to the construction of the new Busan port were determined through a numerical simulation. Various scenarios for the discharge of the Nakdong river estuary dam and construction stage of the new Busan port were established and utilized for an indirect and qualitative investigation through simulation using the numerical model implemented in this study. It was concluded through a qualitative study that the morphological changes in the seabed surrounding Jinwoo-Island were typical estuary seabed changes due to the discharge of the Nakdong river estuary dam and waves from the open sea. The effects from the construction of the new Busan port were relatively small.

• 한국항해항만학회지
• /
• 제28권10호
• /
• pp.925-931
• /
• 2004

목포항 인접해역은 영산강 하구둑과 영암-금호방조제 건설로 인하여 많은 변화를 가져왔다. 특히, 영산강 하구둑과 영암-금호방조제 방류에 의한 영향은 조류속 변화와 퇴적특성 변화와 같은 환경적 영향을 초래하기 때문에 중요하다. 본 연구에서는 영암-금호방조제, 영산강 하구둑 방류현황을 수집${\cdot}$분석하고, 이를 바탕으로 하여 기존의 수치모형실험에서 간과되어 온 방류와 관련된 각종 실험계수를 재조정하여 수치모의론 수행하여 인근 해역 특성을 분석하였다. 영암-금호방조제에서의 방류량에 따른 조류변화를 파악하였으며 이에 기초하여 퇴적특성 변화를 비교한 결과, 조류 순환과 밀접한 관련이 있음을 알 수 있었다.