• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1266-1271
• /
• 2007

General coil spring has linearity. However, disc spring has non-linearity so that using this non-linearity disc spring can be designed to do shock-absorbing in cases we need because shock response also has non-linearity. By changing the shape and stacking number, it is satisfactory with response of displacement, velocity and acceleration. Conventionally, disc spring was used to control the vibration against huge load and limited space. However, it is limitedly used because of difficulty of the designing guidance. Therefore, disc spring is needed to study further in order to apply it widely. Response of disc spring is compared to response of coil spring by changing ho/t radio with computer simulation and the usage of disc spring is increased through analysis of effect of design factors. The purpose of this paper is that the shock response of disc spring is calculated through numerical simulation and effect of ho/t and stiffness is analyzed to broad usage so that design factor of disc spring is presented.

• 한국소음진동공학회논문집
• /
• 제18권2호
• /
• pp.153-159
• /
• 2008

General coil spring has linearity. However, disc spring has non-linearity so that using this non-linearity disc spring can be designed to do shock-absorbing in cases we need because shock response also has non-linearity. By changing the shape and stacking number, it is satisfactory with response of displacement, velocity and acceleration. Conventionally, disc spring was used to control the vibration against huge load and limited space. However, it is limitedly used because of difficulty of the designing guidance. Therefore, disc spring is needed to study further in order to apply it widely. Response of disc spring is compared to response of coil spring by changing $h_o/t$ ratio with computer simulation and the usage of disc spring is increased through analysis of effect of design factors. The purpose of this paper is that the shock response of disc spring is calculated through numerical simulation and effect of $h_o/t$ and stiffness is analyzed to broad usage so that design factor of disc spring is presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.796-799
• /
• 2002

The stress of the rotating disc with several types of hole was investigated in detail in this paper. Maximum circumferential stress of rotating disc by changing hole shape with same area, were studied using FEM. The results obtained were as follows: 1. The disc which rotates at high speed is subjected to circumferential stress remarkably. 2. When the number of circular holes in rotating disc is four, stress reduction effect is maximum. 3. When shape of holes in rotating disc is cylindrical elongated hole, maximum circumferential stress of the rotating disc decreased most.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.248-251
• /
• 2005

To investigate the degeneration process in the intervertebral disc, a three dimensional (3D) poroelastic finite-element (FE) model was developed. Disc was modeled as two different regions, such as annulus modeled with fiber reinforced 20 node poroelastic ground matrix and nucleus having large porosity. Excess Von Mises stress in the disc element assumed to be a possible source of degeneration under compressive loading condition. Recursive calculation was continued until the desired convergence was attained by changing the permeability and porosity of those elements, which could be predicted from the previous iteration. The degenerated disc model showed that relatively small compressive stresses were generated in the nucleus elements compared to normal disc. Its distribution along the sagittal plane was matched well with a previously reported experimental result. Contrasts to this result, pore pressures in the nucleus were higher than those in the normal disc. Total stress indicated similar values for two different models. This new approach using poroelastic modeling could provide the explanation of the interaction between fluid and solid matrix in the disc during the degeneration process.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.665-670
• /
• 2000

The paper presents the dynamic instability of a disc brake pad subjected to distributed friction forces. A brake pad can be modeled as a beam with two translational springs. The study of this prototypical model is intended to provide a fundamental understanding of disc brake pad instabilities. Governing equations of motion are derived form energy expressions and their corresponding solutions are obtained by employing the finite element method. The critical distributed friction force and the instability regions are demonstrated by changing two translational spring constants. Finally, the changes of eigen-frequencies of a beam determining instability types are investigated for various combinations of two spring constants.

• 한국안전학회지
• /
• 제7권1호
• /
• pp.5-12
• /
• 1992

Disc specimen with the center crack and edge crack simulated by two-dimensional static method is used to analyze the stress field around the crack tip in terms of the stress intensity factor, K. A simple and convenient method of testing to realize the mifed mode stress intensity factor of the cracked body is used, The conclusions obtatined in this photoelastlc analysis are as follows ; 1. According to this experiment, cracked disc specimen can be used to demonstrate the mixed mode stress intensity factor analysis by simply changing the crack angle from the loading line. 2. Despite the simplicity and continuous data reading, the photoelastic method shows the slightly lower strain reading comparing to the FEM analysis method. 3. In this photoelastic analysis, $K_{I}$ of center cracked disc specimen under a pair of compressive load shows negative value as the crack angle increases over 30$^{\circ}$.

• 한국추진공학회지
• /
• 제14권5호
• /
• pp.101-110
• /
• 2010

이중 펄스 로켓 추진기관은 하나의 연소관 안에 특성이 다른 2개의 추진제가 격벽에 의해 2개의 공간에 분리되어 있는 고체 추진기관이다. 유한요소법을 이용한 탄소성 동적거동해석에 의하여 펄스분리 장치 파열판의 파열해석을 수행하였다. 파열판의 슬릿 크기를 변경한 해석을 수행하여 파열형상, 파열시점을 해석함으로써 슬릿의 설계 변수가 파열판에 미치는 영향을 검토하였다. 해석 결과는 펄스분리 장치 파열판 슬릿 크기의 변경을 통한 파열압력의 조절에 사용할 수 있다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.261-264
• /
• 2010

이중 펄스 로켓 추진기관은 하나의 연소관 안에 특성이 다른 2개의 추진제가 격벽에 의해 2개의 공간에 분리되어 있는 고체 추진기관이다. 유한요소법을 이용한 탄소성 동적거동해석에 의하여 펄스분리장치 파열판의 파열해석을 수행하였다. 원주방향 슬릿을 가진 파열판의 슬릿 크기를 변경한 해석을 수행하여 파열형상, 파열시점을 해석함으로써 슬릿의 설계 변수가 파열판에 미치는 영향을 검토하였다. 해석 결과는 펄스분리장치 파열판 슬릿 크기의 변경을 통한 파열압력의 조절에 사용할 수 있다.

• 한방재활의학과학회지
• /
• 제21권4호
• /
• pp.119-130
• /
• 2011

Objectives: The purpose of this study is to find cut the characteristics of intervertebral disc changes arid relative factors of the patients with spondylolisthesis. Methods: We investigated 95 cases of patients who visited one Korean traditional medicine hospital and were diagnosed as spondylolisthesis on lumbar spine X-ray and lumbar spine magnetic resonance imaging(MRI). We selected these cases retrospectively and randomly. We analysed the relativity between number of changed discs and type of change disc and age, level of spondylolisthesis and type of spondylolisthesis. Results: 1. The number of changed discs increased with older and degenerative spondylolisthesis type(p<0.05) and was not related to the level of spondylolisthesis. 2. Bulging disc is the dominant type of disc change(74.12%). The type of changed disc was shown to be similar in lytic and degenerative spondylolisthesis. It was not relative to the level of spondylolisthesis(p>0.05). 3. The direction of nerve compression was diffuse type in about halfly of the patients(47.06%) and the symptoms of patent and dermatome did not matched in 54 cases. Conclusions: The patients who visited a Korean medicine hospital and were diagnosed as spondyolithesis have different characteristics from the established studies. Their discs changed dominantly to diffuse bulging type and the symptoms of patient were not related with the direction and level of the changed discs were spondylolisthesis existed.

• 척추신경추나의학회지
• /
• 제6권2호
• /
• pp.13-22
• /
• 2011

Objectives : The purpose of this study is to find out the characteristics of intervertebral disc changes and relative factors of the spondylolisthesis patients in fifties by type of spondylolisthesis. Methods : We investigated 69 cases of patients who visited one Korean traditional medicine hospital and were diagnosed as spondylolisthesis on L-spine X-ray and L-spine magnetic resonance imaging(MRI). We selected 37 lytic spondylolisthesis patients and 32 degenerative spondylolisthesis patients. We analysed the relativity between the numbers of changed discs, types of changed disc, locations of nerve compression and types of spondylolisthesis. Results : 1. The number of changed discs increase in lytic type, but there is no statistically significant difference. 2. Bulging disc is the dominant type of disc change. There is no significant difference between two types. 3. Both foraminal type was shown dominantly in lytic spondylolisthesis, diffuse type in degenerative spondylolisthesis by the analysis of the location of the nerve compression. But the symptoms of patients and dermatome did not match in most of the cases. Conculsions : The direction of nerve compression is different while the disc changing aspects are similar in both types. In several spondylolisthesis patients in fifties, symptoms of patient are related to degeneration of vertebrae, not to the type of spondylolisthesis.