• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.429-437
• /
• 2010

The aim of this study was to evaluate the fluoride release and microhardness of Beautifil II as giomer(Group I), F2000 Compomer as compomer(Group II), GC Fuji II LC Capsule as resin-modified glass ionomer(Group III) and $Filtek^{TM}$ Z350 as composite resin(Group IV) according to time. Forty discs(5 mm diameter and 2 mm height) were prepared for each material. Each disc was immersed in 3 ml of de-ionized water within polyethylene tube and stored at $37^{\circ}C$. Evaluations were performed by pH/ISE meter for analysis of fluoride release and hardness testing machine for analysis of microhardness over 31 days. The results can be summarized as follows : 1. For all groups except group IV, the greatest fluoride release was observed after the first day of the study period and then dramatically diminished over time. On the 7th day of the study period, fluoride release level was stabilized. 2. Group III showed the highest fluoride release among test groups and then group II, group I were followed. Significant difference in cumulative fluoride release over 31 days was found between each groups. Group IV showed no fluoride release during study period. 3. Group IV showed the highest microhardness among test groups and then group I, group II, group III were followed. Significant difference in microhardness was found between each group, except between group I and group II. 4. After 31 days, microhardness was slightly diminished in every group. However, no significant difference was found.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.7
• /
• pp.1106-1111
• /
• 2004

This study was performed to investigate the antimicrobial effect of the Indigofera kirilowii extracts against food-borne pathogens. The Indigofera kirilowii was extracted with methanol at room temperature, and fractionation of the methanol extract from Indigofera kirilowii was carried out by using petroleum ether, chloroform, ethyl acetate, and methanol, respectively. The antimicrobial activity of the Indigofera kirilowii extracts was determined using a paper disc method against food-borne pathogens and food spoilage bacteria. The ethyl acetate extract of Indigo/era kirilowii showed the highest antimicrobial activity against Staphylococcus aureus and Shigella dysenteriae. The water extract of Indigofera kirilowii showed relatively low antimicrobial activity against microorganisms used in this experiment. The synergistic effect has been found in combined extracts of Indigofera kirilowii and Pulsatilla koreana as compared to each extract alone. The growth inhibition curve was determined using ethyl acetate extracts of Indigofera kirilowii against S. aureus and S. dysenteriae. The ethyl acetate extract of Indigofera kirilowii showed strong antimicrobial activity against S. aureus at the concentration of 4,000 ppm. The 4,000 ppm of ethyl acetate extract from Indigofera kirilowii retarded the growth of S. aureus more than 24 hours and S. dysenteriae up to 48 hours. This study showed the possibility of using ethyl acetate extract of Indigofera kirilowii as a material of food preservative.

• The Korean Journal of Pesticide Science
• /
• v.4 no.1
• /
• pp.11-18
• /
• 2000

This study was conducted to establish an efficient screening method of membrane-disrupting herbicides, based on the result that membrane leakage leading to evolution of carbonyl compounds and aldehydes could be colorimetrically assessed by formation of stable chromophores with MBTH and ferric chloride. Assay conditions including plant material, light intensity, irradiation time, concentrations of reagents for colorization, and reaction time were optimized, and activities of different types of known herbicides were investigated with cucumber cotyledon discs. That result indicated that this assay was sensitive to membrane-disrupting herbicides, such as protoporphyrinogen oxidase inhibitors (acifluorfen, oxyfluorfen, oxadiazon) and an electron interceptor from photosystem I(paraquat). With seven compounds newly synthesized, highly positive correlation was observed between herbicidal activities measured by greenhouse bioassay and MBTH method. Because only a single disc(4 mm diameter) from cucumber cotyledon in 60 ${\mu}L$ of incubation solution was required to assay, a large number of herbicides could be tested simultaneously using 96-well microtitre plates. But the assay efficiency is not likely to significantly increase because of the boiling step during the reaction.

• Journal of the Korean Vacuum Society
• /
• v.15 no.3
• /
• pp.287-293
• /
• 2006

Diamond-like carbon (DLC) film was deposited using benzene $(C_6H_6)$ by r. f-plasma assisted chemical vapor deposition. The tribological properties of the DLC film were tested by rotating ball-on-disc type tribometer isolated by a chamber. The tribological test was performed in air environment of relative humidity ranging from 0 to 90% in order to observe the tribological behavior of the DLC film with the change of humidity. We used steel ball and DLC coated steel ball to investigate the effect of the counterface material. Using steel ball, the friction coefficient of DLC film increased from 0.025 to 0.2 as the humidity increased from 0% to 90%. In case of DLC coated steel ball which didn't form the Fe-rich debris, the friction coefficient showed much lower dependence of humidity as 0.08 in relative humidity 90%. We confirmed that the high humidity dependence of the friction coefficient using steel ball resulted from the increase of debris size with humidity and the formation of Fe-rich debris by the wear of steel ball. And the friction coefficient was immediately dropped when the relative humidity changed from 90% to 0% during test using steel ball. From this result, we confirmed that the effect of the Fe-rich debris on the friction coefficient was that Fe element in debris formed the highly sensitive graphitic transfer layer to humidity.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.12-20
• /
• 2009

Statement of problem: When an implant is fixed, a fixture comes into contact with a tissue fluid. Adhesion of a tissue fluid to a surface of implant is various case by case. Purpose: The ultimate goal of this work is to analyze a correlation between a surface roughness and wettability of implant specimens. A measurement for wettability is performed considering 4 types of specimen implant with surface treatments different from each other to investigate the change of wettability with the elapse of time. Material and methods: Firstly, 20 specimens of titanium were prepared. The specimen were made of a commercial Titanium Grade IV with the diameter of 10 mm and the thickness of 1 mm. According to the method of surface treatment, the specimens were classified into 4 groups of 5 specimens per group. Group A: Machined Surface Group B: Anodized surface Group C: RBM (HA blasting) surface Group D: CMP (calcium methaphosphate) coating surface. Surface roughness of specimen was measured using SV-3000S4 (Mituyoto, Japan). The measurement was based on the standard of JIS1994. Sessile drop method was used to measure the wettability, which measures contact angle between implant disc and saline with the time interval of 5, 10, and 15 seconds. SPSS 11.0 was used to analyze the collected data. In order to analyze the difference of wettability and surface roughness according to implant surface treatment method. The statistical significance was tested with the confidence level of 95%. Pearson's correlation coefficient was used to evaluate the correlation of surface roughness and wettability. Results: The difference of surface roughness was statistically significant in the order of Group C ($1.69{\pm}0.26$), Group D ($1.58{\pm}0.16$), Group B ($0.78{\pm}0.14$) Group A ($0.18{\pm}0.05$). The wettability has also a statistically significant difference, which was in the order of group B ($17.70{\pm}2.66$), Group C ($27.86{\pm}4.52$), Group D ($66.28{\pm}3.70$) Group A ($70.52{\pm}8.00$). There was no difference in wettability with the passage of time. Conclusions: 1. The surface roughness was high in the order of RBM, CMP, Anodized, Machined group (P<.05). 2. The wettability was high in the order of Anodized, RBM, CMP, Machined group (P<.05). 3. There was no statistical significance in the correlation of surface roughness and wettability.

• Composites Research
• /
• v.25 no.4
• /
• pp.98-104
• /
• 2012

In recent years, degenerative spinal instability has been effectively treated with a cage. However, little attention is focused on the stiffness of the cage. Recent advances in the medical implant industry have resulted in the use of medical carbon fiber reinforced polymer (CFRP) cages. The biomechanical advantages of using different cage material in terms of stability and stresses in bone graft are not fully understood. A previously validated three-dimensional, nonlinear finite element model of an intact L2-L5 segment was modified to simulate posterior interbody fusion cages made of CFRP and titanium at the L4-L5 disc with pedicle screw, to investigate the effect of cage stiffness on the biomechanics of the fused segment in the lumbar region. From the results, it could be found that the use of a CFRP cage would not only reduce stress shielding, but it might also have led to increased bony fusion.

• Applied Biological Chemistry
• /
• v.13 no.1
• /
• pp.59-64
• /
• 1970

Human Bence Jones Protein could be purified by DEAF-Sephadex A-50 column $(2{\times}37cm)$ with 0.02M phosphate Buffer (pH 8.0) and gradient increasing with NaCl concentration as in Fig. 2-4. Sample As (K-type Bence Jones Protein) had two component, F-I was major component and its dried weight was 350mg. of starting material of 500mg. Other Sample Im and Ik (${\lambda}$-type Bence Jones Protein) was purified by DEAE-Sephadex A-50 with 0.02M phosphate Buffer(pH 8.0)too. F-I (major component) of Im and F-I of Ik were 242mg and 146mg. its dried weight respectively. K-type of Bence Jones Protein's(As, Ko, Ta.) N-terminal amino acid residue was determined by method of DNP,. K-type of Bence Jones Protein's amino acid residue were either glutamic acid or aspartic acid. Sample Ta was confirmed as glutamic acid its N-Terminal. As and Ko were aspartic acid. Each yellowish spot (DNP-amino acids) were extracted with 4ml. of pH 8.05% $NaHCO_3$ solution and calculated its recovery by O.D. $(360m{\mu}$ using the ${\varepsilon}=18.1{\times}10^3DNP$ $Asp\;{\varepsilon}=17.41{\times}10^(3)\;DNP\;Glu$ considering 50% lose during; the acid (6N-HCI) hydrolysis. Recovery of ko and As were 54.3% and 65% of its starting materials (DNP-Protein). Sample Ta's recovery was 85% of its DNP-protein. ${\lambda}$-type of Bence Jones Protein was rot investigated its N-terminal amino acid residue by DNP-method, probably it was blocked its N-terminal residue with glutamic acid.

• Textile Coloration and Finishing
• /
• v.26 no.1
• /
• pp.45-52
• /
• 2014

Red pine (Pinus densiflora) is widely used traditional medicine, pharmacological and nutritional values from which the phytochemical compounds are derived. The present study was aimed to examine the antibacterial effects in the absence and presence of a immature red pine cone extract against 13 microorganisms. The components in the aqueous extract from immature red pine cone were identified by GC-MS. About 1.4% of total polyphenolic compound was measured in aqueous extract collected from immature red pine cone. Also, the high concentration of ${\beta}$-phellenandrene, ${\alpha}$-pinene, limonene, bornyl acetate and aldehyde was detected in total ion chromatograms. Of total 13 microorganisms, 4 microorganisms including Pseudomonas aeruginosa, Vibrio cholera, Listeria monocytogenes, Klebsiella pneumonia were effectively killed by aqueous extract of immature red pine cone. The highest anti-bacterial effect was detected in P. aeruginosa, followed by V. cholera, L. monocytogenes and K. pneumonia. In case of P. aeruginosa, the largest diameter of inhibition zone was maintained to 1/2 solution treated cells and slightly decreased at 1/4 and 1/8 solution treated cells. Also, in test used V. cholera and L. monocytogenes, the inhibition zone was strongly formed in only 1 and 1/2 solution treated cells, while K. pneumonia showed the very small diameter of inhibition zone in all concentrations. Therefore, these results suggested that the aqueous extracts of immature red pine cone should be considered as a new and potentially important anti-bacterial substrate to effectively prevent the microbial infection and penetration.

• Microbiology and Biotechnology Letters
• /
• v.33 no.2
• /
• pp.130-135
• /
• 2005

To investigate the antimicrobial effect of the Patrinia scabiosaefolia extracts against food-borne pathogens, we extracted the P. scabiosaefolia with methanol at room temperature and the fractionation of the methanol extracts was carried out by using petroleum ether, chloroform, ethyl acetate, and methanol, respectively. The antimicrobial activity of the P. scabiosaefolia extracts was determined by using a paper disc method against food-borne pathogens and food spoilage bacteria. The ethyl acetate extracts of P. scabiosaefolia showed the highest antimicrobial activity against Escherichia coli and Shigella sonnei. Synergistic effect in inhibition was observed when P. scabiosaefolia extract was mixed Forsythiae fructus extract as compared to each extracts alone. Finally, the growth inhibition curves were determined by using ethyl acetate extracts of P. scabiosaefolia against Staphylococcus epidermidis and Shigella sonnei. The ethyl acetate extract of P. scabiosaefolia had strong antimicrobial activity against S. sonnei at the concentration of 4,000 ppm. At this concentration, the growth of S. Sonnei was retarded more than 72 hours and up to 48 hours for S. epidermidis. These results suggest that the ethyl acetate extracts of P. scabiosaefolia can be used for the efficient material against the growth of S. epidermidis and S. sonnei.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.1
• /
• pp.1-14
• /
• 2005

Statement of problem. Among the physical properties of adhesion luting cement, the aspect that requires the most important factor is the degree of solubility and water sorption. Dissolution or an inadequate due to excessive water sorption inside the oral cavity compromises the while concurrently increasing the susceptibility to secondary dental caries. Susceptibility to dissolution and difficulty of removing remnant cement from the gingival sulcus have hindered the use of dental resin cement in the clinical practice, but the improved characteristics of newer generation resin cements have interest in and enabled resin cements to be widely used in adhesion of fixed prosthesis, such as laminate veneers and all-ceramic crowns. Purpose. The purpose of this study is to compare and analyze the degrees of solubility and water sorption of a variety of resin cements widely used for clinical purposes with different curing methods. Material and methods. Self-curing resin cements, $Avanto^{(R)}$, $C&B^{TM}$ CEMENT and Superbond C&B cements comprised group 1, 2 and 3. The dual-curing resin cements $Panavian^{TM}$ F, $Calibra^{(R)}$ and $Variolink^{(R)}$ II were divided into groups 4, 5, and 6, respectively. The investigation was carried out using disc-shaped specimens as specified by ANSI/ADA Specification No. 27. The degree of water sorption, water solubility and lactic acid solubility of each test group was analyzed statistically leading to the following conclusion. Results. The degree of water sorption was shown to increase in the following order : group 6, 5, 4, 2, 1 and 3. There were significant differences between the water sorption of each group. Results of the degree of water solubility were shown to increase in the following order : group 6, 5, 4, 2, 1 and 3. Statistically significant differences were found between each group, with the exception of groups 1 and 3. Finally, the degree of lactic acid solubility was found to increase in the following order : group 6,5,4,2,3 and 1. Significant differences were found between each group. In general dual-curing resin cements displayed substantially lower values than self-curing resin cements with regard to water sorption, water solubility, and lactic acid solubility. Conclusions. From the results of this study, dual-curing resin cements show a significantly lower degree of water sorption and solubility than their self-curing counterparts. Clinically, when selecting resin cements, the product with a lower degree of water sorption and solubility are preferred. The results of this study indicate that the use-of dual-curing resin cements is preferable to self-curing cements.