• The Journal of the Convergence on Culture Technology
• /
• v.4 no.1
• /
• pp.307-314
• /
• 2018

It became clear that Korean peninsula is not a safe region anymore from an earthquake disaster after Gyeongju and Pohang Earthquake in 2016-2017. Unfortunately, building industry in Korea has not been well prepared for an earthquake disaster and the following problems exist. First, the rate of buildings with proper seismic performance is relatively low. Second, the number of piloti buildings which are vulnerable to earthquake and fire disaster has increased recently. Third, the proportion of small-scale buildings excluded from the application of the building law for securing safety is too high. Fourth, widespread corruption and poor construction impede safety. Therefore, measures to prepare for earthquake disaster are as follows. First, methods of reinforcing building structures and reducing the seismic load acting on a building should be utilized in order to secure the insufficient seismic performance of buildings vulnerable to earthquakes. Second, whistleblowers should be encouraged and protected to prevent defective construction due to corruption. To this end, whistleblowers should be recognized as an effective means of protecting public interest not the traitor to the organization.

• Earthquakes and Structures
• /
• v.4 no.1
• /
• pp.11-39
• /
• 2013

Since slender structures such as utility poles, radio masts, and chimneys, are essentially statically determinate structures, they often collapse during earthquakes. Although vibration control is the most logical method for improving the earthquake resistance of such structures, there are many practical problems with its implementation due to their very long natural vibration period. This paper proposes a new vibration control device to effectively prevent the collapse of slender structures subjected to strong earthquakes. The device consists of a pendulum, an elastic restraint and a lever, and is designed such that when it is attached to a slender structure, the second vibration mode of the structure corresponds to the first vibration mode of the same structure without the device attached. This is highly effective in causing the transverse motions of the device and the structure to oppose each other and so reduce the overall transverse vibration during an earthquake. In the present paper, the effectiveness of the vibration control device is first evaluated based on laboratory experiments and numerical studies. An example of applying the device to a tall chimney is then simulated. A new dynamic analytical method for slender structures with abrupt rigidity variations is then proposed.

• Journal of the Society of Disaster Information
• /
• v.13 no.1
• /
• pp.6-14
• /
• 2017

The opportunity provided for design method and strategy of sustainable campus on the waterfront, is the purpose of this paper. Waterfront campus is an important issue as it seeks to revive the sustainability and to renew the facilities. This paper reviews an assessment of its success for waterfront campus in 10 principles such as waterfront, water and safety, climate & energy, green building and transportation, green labs and recycling, health and food, social economic sustainability, fund, human, smart, also concludes with the establishment of space making for the waterfront campus for future educational facilities on the waterfront; implementation of waterfront campus maserplan; building sustainable campus in adaptation to climate change; creative and resilient cooperation.

• Earthquakes and Structures
• /
• v.3 no.5
• /
• pp.675-694
• /
• 2012

The 2008 Iwate-Miyagi Nairiku earthquake ($M_w$ 6.9, $M_{jma}$ 7.2) occurred on 14 June 2008 in Japan. The amplification and asymmetric waveform of the vertical acceleration at the ground surface recorded by accelerometers at station IWTH25, situated 3 km from the source, were remarkable in two ways. First, the vertical acceleration was extremely large (PGA = 38.66 $m/s^2$ for the vertical component, PGA = 42.78 $m/s^2$ for the sum of the three components). Second, an unusual asymmetric waveform, which is too far above the zero acceleration axis, as well as large upward spikes were observed. Using a multidegree-of-freedom (MDF) system consisting of a one-dimensional continuum subjected to vertical acceleration recorded at a depth of 260 m below ground level, the present paper clarifies numerically that these singular phenomena in the surface vertical acceleration records occurred as a result of the jumping and collision of a layer in vertical motion. We herein propose a new mechanism for such jumping and collision of ground layers. The unexpected extensive landslides that occurred in the area around the epicenter are believed to have been produced by such jumping under the influence of vertical acceleration.

• Journal of Information Technology and Architecture
• /
• v.9 no.1
• /
• pp.67-78
• /
• 2012

Organizations have many physical servers in their departments such as application servers, web servers, database servers, mail servers, and so forth. The problem of server sprawl is common in information system centers of most profit and nonprofit organizations. Server sprawls are characterized by the use of dedicated servers for single applications. This server sprawl causes the problems such as the low resource utilization, the large space consumption, and the high management cost. Server consolidation is crucial to solve these problems by providing savings in hardware, software, maintenance, facility, and labor costs. This paper proposed a method to implement server consolidation for public organizations by the NDMS(National Disaster Management Systems) case study.

• Earthquakes and Structures
• /
• v.17 no.5
• /
• pp.435-445
• /
• 2019

The collapses of curved bridges are mainly caused by the damaged columns, subjected to the combined loadings of axial load, shear force, flexural moment and torsional moment, under earthquakes. However, these combined loadings have not been fully investigated. This paper firstly investigated the mechanical characteristics of the bending-torsion coupling effects, based on the seismic response spectrum analysis of 24 curved bridge models. And then 9 reinforced concrete (RC) and circular column specimens were tested, by changing the bending-tortion ratio (M/T), axial compression ratio, longitudinal reinforcement ratio and spiral reinforcement ratio, respectively. The results show that the bending-torsion coupling effects of piers are more significant, along with the decrease of girder curvature and the increase of pier height. The M/T ratio ranges from 6 to 15 for common cases, and influences the crack distribution, plastic zone and hysteretic curve of piers. And these seismic characteristics are also influenced by the compression ratio, longitudinal reinforcement ratio and spiral reinforcement ratios of piers.

• Steel and Composite Structures
• /
• v.35 no.6
• /
• pp.739-752
• /
• 2020

This paper aims to investigate cyclic plasticity of a new type of high-performance austenitic stainless steel with both high strength and high ductility. The new stainless steel termed as QN1803 has high nitrogen and low nickel, which leads to reduction of cost ranging from 15% to 20%. Another virtue of the new material is its high initial yield strength and tensile strength. Its initial yield strength can be 40% to 50% higher than conventional stainless steel S30408. Elongation of QN1803 can also achieve approximately 50%, which is equivalent to the conventional one. QN1803 also has a corrosion resistance as good as that of S30408. In this paper, both experimental and numerical studies on the new material were conducted. Full-range true stress-true strain relationships under both monotonic and cyclic loading were obtained. A cyclic plasticity model based on the Chaboche model was developed, where a memory surface was newly added and the isotropic hardening rule was modified. A user-defined material subroutine was written, and the proposed cyclic plasticity model can well evaluate full-range hysteretic properties of the material under various loading histories.

• Journal of the Society of Disaster Information
• /
• v.14 no.4
• /
• pp.409-420
• /
• 2018

Purpose: The purpose of this study is to present improvement measures for enhancing practicality through case analysis of Inner and Outer-Temporary Housing. Method: First, the basic functions and types of Temporary Housing, were discussed through prior research analysis. Second, a practicality problem was derived by analyzing cases of Temporary Housing. Third, improvement measures were proposed to ensure the practicality of Temporary Housing based on the problems identified. Results: Factors such as habitability, economics, construct ability and operation methods that should ultimately be improved in Temporary Housing, and these elements were divided into production, transportation, construction, and storage according to the life cycle, suggesting matters to be improved in order to improve practicality at each stage. Conclusion: The proposed improvements are considered to help develop inner and outer-temporary housing.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.30 no.2
• /
• pp.35-46
• /
• 2024

Purpose: It is the responsibility of public healthcare to respond quickly to infectious disease outbreaks and disasters such as MERS, COVID-19, the Syrian earthquake, and the Miryang Sejong Hospital fire accident. It is very important to secure safe medical facilities and protect lives through emergency medical support and disaster response systems. The purpose of this study is to investigate the safety status of regional medical facilities that play a central role in the event of a disaster. Methods: The target was 41 local public hospitals, including 35 regional medical centers and 6 Red Cross hospitals nationwide. We delivered a questionnaire to 41 medical facilities and collected data from 32 regional public hospitals that received responses. Results: In order to respond to safety accidents, a survey was conducted on infections, falls, patient identification, and incorrect connections for medical accidents, and for in-hospital accidents, a survey was conducted on entrapment, collision, water leaks, falling objects, and crime prevention. For natural disasters, we investigated the response environment for typhoons, floods, and snow damage, and for social disasters, we investigated the response environment for fire, power outages, and radiation damage. Implications: We hope that it will be used as basic data for developing standards and creating hospital facilities and environments that are safe for everyone to respond to various disasters and prevent patient safety accidents in the future.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.6
• /
• pp.49-60
• /
• 2013

Evacuation process has been considered as one of the most important elements to be managed in public facilities. Although the importance is highlighted through numerous literatures, disaster evacuation planning, particularly fire accidents, faces a number of human behavior related limitations for a similar application to different types of facilities/occupants. To overcome the obstacles including complexity in human behaviors, a number of simulation techniques with limited consideration on human behaviors are utilized to predict foreseeable problems in evacuation process. Therefore, this research aims to propose system dynamics models incorporating human behaviors considering different types of occupants under disaster evacuation events. Analysis on emergent human behaviors such as group forming and interactions under urgent situation are conducted based on the main stream theories in social science field. The results suggest the influences of human behavior factors including cooperative intention, information sharing, and mobility change to evacuation behavior. The implications are expected to provide safety consideration at planning/designing phase of buildings and help facility safety managers for evacuation planning with more realistic management approaches.