• 한국산학기술학회논문지
• /
• 제9권5호
• /
• pp.1392-1398
• /
• 2008

본 논문에서는 분해우선작업을 가지는 페트리 넷 기반의 분해순서계획모델을 제안한다. 모든 가능한 분해순서는 분해트리에 의해 생성되고, 분해우선순위와 분해가치 행렬을 이용하여 분해순서를 결정한다. 분해작업의 우선순위는 분해트리를 통하여 결정하고 분해작업의 가치는 제품의 마지막 수명단계의 경제적 분석에 의해 유도된다. 분해우선작업을 가지는 분해계획모델을 해결하기 위하여, 본 연구에서는 페트리 넷 기반의 휴리스틱 알고리듬을 개발한다. 개발된 알고리듬은 페트리 넷 모델의 전이순서에 기반을 두어 도달할 수 있는 모든 그래프의 노드를 탐색하여 최적의 혹은 근사최적의 분해순서를 생성한다. 본 연구에서는 냉장고를 대상으로 제안모델의 유효성을 입증한다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권1호
• /
• pp.42-50
• /
• 2005

In order to increase competitiveness and to gain economic benefit, companies ask more and more how to recycle their products in an efficient way. So far, to answer this question, companies are not sufficiently supported by suitable methods specially in the area of disassembly process planning. For this reason, we develop in collaboration with an industrial partner a new method for generating an optimal disassembly sequence. In this paper this method will be described in detail by considering the exiting assembly information, disassembly method and disassembly depth. PLM(Profit-Loss Margin) curve that is used to determine disassembly depth consists of profit value, disassembly cost and disassembly effect. Using assessment parameters, generated alternative disassembly sequences are evaluated and an optimal disassembly sequence is proposed. This method is applied to generate the optimal disassembly sequence of Door Trim as an example.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.422-425
• /
• 2001

The realization of the avoidance, decrease and utilization of waste can be made through reduction of resource consumption during product production and use. Beside that it is desirable to regain the resource attached to products and components. The same resources can be much used in product and mater all cycle through their reuse and regeneration In order to improve the use productivity of resource the disassembly make up the substantial prerequisite. In this paper a model describing the disassembly sequence structure is introduced under consideration of the influential facts related to disassembly process planning rules for disassembly sequence planning are derived from that.

• 산업경영시스템학회지
• /
• 제32권4호
• /
• pp.192-202
• /
• 2009

Disassembly of products at their end-of-life (EOL) is a prerequisite for recycling or remanufacturing, since most products should be disassembled before being recycled or remanufactured as secondary parts or materials. In disassembly sequence planning of EOL products, considered are the uncertainty issues, i.e., defective parts or joints in an incoming product, disassembly damage, and imprecise net profits and costs. The paper deals with the problem of determining the disassembly level and corresponding sequence, with the objective of maximizing the overall profit under uncertainties in disassembly cost and/or revenue. The solution is represented as the longest path on a directed acyclic graph where parameter (arc length) uncertainties are modeled in the form of intervals. And, a heuristic algorithm is developed to find a path with the minimum worst case regret, since the problem is NP-hard. Computational experiments are carried out to show the performance of the proposed algorithm compared with the mixed integer programming model and Conde's heuristic algorithm.

• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.188-196
• /
• 2003

In order to increase competitiveness and to gain economic benefit, companies ask more and more how to recycle their products in a efficient way. So far, to answer this question, companies are not sufficiently supported by suitable methods specially in the area of disassembly process planning. For this reason, we develop in collaboration with an industrial partner a new method for generating an optimal disassembly sequence. In the presented paper this method will be described in detail by considering the exiting assembly information, disassembly method and disassembly depth. PLM (Profit-Loss Margin) curve that is used to determine disassembly depth consists of profit value, disassembly cost and disassembly effect. Using assessment parameters, generated alternative disassembly sequences are evaluated and optimal disassembly sequence is proposed. This method is applied to generate the optimal disassembly sequence of Door Trim as an example.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1329-1330
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.873-874
• /
• 2010

• 한국정밀공학회지
• /
• 제16권5호통권98호
• /
• pp.29-39
• /
• 1999

Many industrial products can be assembled in various sequences of assembly operations. To save time and cost in assembly process and to increase the quality of products, it is very important to choose an optimal assembly sequence. In this paper, we propose a methodology that generates an optimal assembly sequence by using the knowledge of experts. First, a product is divided into several sub-assemblies. Next, the disassembly sequences of sub-assembly are generated using disassembly rules and special information can be extracted through the disassembly process. By combining every assembly sequence of sub-assemblies, we can generate all the possible assembly sequences of a product. Finally, the expert system evaluates all the possible assembly sequences and finds an optimal assembly sequence. It can be achieved under consideration of the parameters such as assembly operation, tool change, safety of part. basepart location, setup change, distance, and orientation. The developed system is applied to UBR(Unit Bath Room) example.

• 한국CDE학회논문집
• /
• 제18권6호
• /
• pp.417-427
• /
• 2013

Assembly direction is used in order to confirm the generated assembly sequences in an automatic assembly sequence planning system. Moreover, assembly sequence planners can ascertain the feasibility of a sequence during simulation with assembly direction based in a CAD environment. In other words, assembly direction is essential for sequence optimizing and automatic generation. Based on the importance of assembly direction, this paper proposes a method to select the best direction for the generated assembly sequence using disassembly simulation and geometrical common area between assembled parts. Simultaneously, this idea can be applied to verify the generated assembly sequence. In this paper, the automatic selection of assembly direction and sequence correction system is designed and implemented. The developed algorithms and the implemented system are verified based on case study in the CAD environment.

• 대한산업공학회지
• /
• 제29권1호
• /
• pp.49-64
• /
• 2003

Although assembly sequence planning is an essential task in assembly process planning, it is known as one of the most difficult and time consuming jobs because its complexity is increased geometrically when the number of parts in an assembly is increased. The purpose of this study is to develop a more efficient algorithm for generating assembly sequences automatically. By considering subassemblies, a new heuristic method generates a preferred parallel assembly sequence that can be used in robotic assembly systems. A parallel assembly sequence concept provides a new representation scheme for an assembly in which the assembly sequence precedence information is not required. After an user inputs both the directional mating relation information and the mating condition information, an assembly product is divided into subgroups if the product has cut-vertices. Then, a virtual disassembly process is executed to generate alternate parallel assembly sequences with intermediate assembly stability. Through searching parts relations in the virtual disassembly process, stable subassemblies are extracted from translation-free parts along disassembling directions and this extraction continues until no more subassemblies are existed. Also, the arithmetic mean parallelism formula as a preference criterion is adapted to select the best parallel assembly sequence among others. Finally a preferred parallel assembly sequence is converted to an assembly BOM structure. The results from this study can be utilized for developing CAAPP(Computer-Aided Assembly Process Planning) systems as an efficient assembly sequence planning algorithm.