• Carbon letters
• /
• v.1 no.2
• /
• pp.69-75
• /
• 2000

Naphtha cracking bottom oil was reformed with heat treatment and then spun at $310^{\circ}C$. These pitch-based carbon fibers were carbonized at $1000^{\circ}C$ after oxidation at $280^{\circ}C$, for 90 min. These fibers were chemically activated with molar ratio of KOH/CF (1 : 1) at different temperatures ($250{\sim}900^{\circ}C$) for 1 hr. The process of activation was characterized with DTA, TGA, BET surface area and pore size distribution. The activation of fibers by KOH was performed by several process. One is the reduction process that carbon fiber was reacted with $K_2O$ produced from dehydration process above $400^{\circ}C$. The other is the process that $K_2CO_3$ was directly reacted with carbon fiber. At $800^{\circ}C$, the activation was performed by catalyzed mechanism that $K_2O$ was obtained from the reaction of metal potassium with $CO_2$, then was changed to $K_2CO_3$. At $870^{\circ}C$, the activation was also observed that activation mechanism was promoted by metal catalyst with $CO_2$ from decomposition of $K_2CO_3$. The specific surface area of prepared activated carbon fibers was dependent on the activation mechanism. The specific surface area was in the range of $1519{\sim}2000\;cm^3/g$ and was the largest prepared at $870^{\circ}C$. The pores developed were mostly micropores which was very narrow and uniform. The total pore volume was $0.58{\sim}0.77\;cm^3/g$.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.1
• /
• pp.139-147
• /
• 2007

For environmental remediation of a contaminated groundwater plume, the use of zero-valent metal represents one of the latest innovative technologies. In this study, the effects of denitrification by zero-valent iron adsorbed in mesoporous silicas have been studied for groundwater contaminant degradation. The mesoporous silica was functionalized with 3-mercaptopropyltrimethoxysilane (MPTS) ligands and the zero-valent iron precipitated in the mesopore of granular silica was made by $FeCl_2$ and $NaBH_4$. Hydrogen was exchanged with $Fe^{2+}$ ions in the granular silicas. And then the ions were reduced by sodium borohydride in the mesoporous silicas. The surface area of the silica determined via the BET method ranged from 858 to $1275m^2/g$. The reductive reaction of nitrate-nitrogen indicated that the degradation of nitrate-nitrogen appeared to be pseudo first-order with the observed reaction rate constant kobs ($0.1619h^{-1}$) and to be directly proportional to the specific surface area. Therefore, the mesoporous silica with nano zero-valent iron proposed as a novel treatment strategy for contaminated groundwater was successfully implemented herein for the removal of nitrate-nitrogen.

• Korean Journal of Veterinary Service
• /
• v.15 no.1
• /
• pp.32-45
• /
• 1992

In order to establish and enzyme-linked immunosorbent assay to ILTV, field virus strain of ILTV was propagated in chorioallantoic membrane of the embryonated eggs. purified and used as antigen. The antisera selected from the field samples and immunized chickens based on serum neutralization test were used as the standard positive and negative sera in all tests. It was found that optimal antigen concentration was $2{\mu}g$ of protein per well and a 1 : 100 dilution of standard serum showed low background optical density with negative serum and high P/N values of positive sera. A 1 : 500 dilution of the rabbit anti-chicken IgG peroxidase conjugate produced a high P/N values and thirty minutes was chosen as suitable time to read the optical density of the enzyme substrate reaction and optical density was consistent during the 16 hours after stopper was treated. When coated antigen was kept on microplate for varying time up to 16 hours at $4^{\circ}C$ or $37^{\circ}C,$ no significant difference was observed between the treatment. The coated antigen could be kept without change of antigenicity for at least one month at $-70^{\circ}C,\; -20^{\circ}C,\; 4^{\circ}C$ and room temperature. When blocking buffer contanining bovine serum albumin was mixed directly with conjugate and serum at 10% level induced higher P/N values compared to blocking antigen coated microplate with the same blocking buffer. The coefficience of correlation between ELISA and SN test was 0.577. When antibody response of chickens, vaccinated with ILTV, was examined by ELISA and SN test, antibody rising and decay pattern between the two test was similar until 11 weeks of age. However 12 weeks onward antibody titer checked on by SN test was slightly lower than that tested by ELISA.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.9
• /
• pp.1395-1403
• /
• 2020

There is an increasing interest in using inactivated probiotics to modulate the host immune system and protect against pathogens. As the immunomodulatory function of heat-killed Lactobacillus brevis KCTC 12777BP (LBB) and its mechanism is unclear, we investigated the effect of LBB on immune response based on the hypothesis that LBB might exert stimulatory effects on immunity. In the current study, we demonstrate that administration of LBB can exert immune-stimulatory effects and promote clearance of foreign matters through enhancing phagocytosis. Treatment with LBB induced the production of TNF-α, IL-6, and nitric oxide in macrophages. Importantly, LBB directly increased the phagocytic activity of macrophages against bacterial particles. LBB was able to promote the production of TNF-α in bone marrow-derived macrophages and splenocytes and also increase the proliferation rate of splenocytes, suggesting that the immune-stimulating activity of LBB can be observed in primary immune cells. Investigation into the molecular mechanism responsible revealed that LBB upregulates TAK1 activity and its downstream ERK, p38, and JNK signaling pathways. To further confirm the immunomodulatory capability of LBB in vivo, we orally administered LBB to mice and assessed the effect on primary splenocytes. Splenocytes isolated from LBB-treated mice exhibited higher TNF-α expression and proliferative capacity. These results show that heat-killed L. brevis, a wildly consumed probiotic, may provide protection against pathogens through enhancing host immunity.

• Journal of Korea Foundry Society
• /
• v.20 no.2
• /
• pp.122-128
• /
• 2000

Strip casting process is a new technology that makes a near net shape thin strip directly from molten metal. With this process, a large amount of energy and casting cost could be decreased from the abbreviation of reheating and/or hot rolling process. Ductile cast iron which has spheroidal graphite in the matrix is the most commercial and industrial material, because of its supreme strength, toughness, and wear resistance etc. But it cannot be produced to the thin strip owing to difficulty in rolling of ductile cast iron. In this study, ductile cast iron strips are produced by the twin roll strip caster, with different chemical compositions of C, Si, and Mn contents. And then heat-treated, microstructures and mechanical properties are examined. The microstructures of as-cast strip are that of white cast iron which consists of the mixture of cementite and pearlite, but the equiaxed crystal zone of the pearlite or segregation zone of cementite exists in the center region of the strip thickness, which cannot be observed in the rapidly solidified metallic mold cast specimens. This structure is supposed to be formed from the thermal distribution of strip and the rolling force. Comparing with the structures of each strips after heat treatment, increasing Si content makes smaller spheroidal graphite and more compact in the matrix, furthermore the less of Mn content makes the ferrite matrix be obtained clearer and easier. As a result of the tensile test of graphitization heat-treated strips, the yield strengths are about 250 MPa, the tensile strengths are about $430{\sim}500$ MPa, and the elongations are about $10{\sim}13%$. In the case of the strip which has the smaller and more compact spheroidal graphite in the ferrite matrix, the higher tensile strength and better drawability could be obtained.

• Imaging Science in Dentistry
• /
• v.53 no.4
• /
• pp.313-323
• /
• 2023

Purpose: This study aimed to investigate the potential factors that could affect the reduction rate of odontogenic cysts following decompression using cone-beam computed tomography (CBCT) for 3-dimensional volumetric analysis. Materials and Methods: The study sample consisted of CBCT images of 41 individuals who underwent decompression of odontogenic cysts at the Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Chulalongkorn University, between 2010 and 2022. Preoperative and postoperative CBCT results were collected, and a volumetric analysis was conducted to evaluate the differences in the reduction rate and the percentage of volume reduction of cystic lesions based on different parameters. Correlations between these parameters were analyzed to determine associations. Results: In this study, the average time of decompression for odontogenic cysts was 316 days. Males demonstrated a higher reduction rate than females (P<0.05). The reduction rate was directly proportional to initial cyst volume, with higher reduction rates for cysts with large initial volume than those with small initial volume (P<0.05). Spearman's rank correlation coefficient indicated a weak positive correlation between the initial cyst volume and the duration of decompression. Additionally, a strong positive correlation was observed between the initial volume and the reduction rate. Conclusion: Knowledge of the reduction rate of odontogenic cysts is vital for surgeons to evaluate the duration of decompression before enucleation and to determine a definitive treatment plan. Sex and initial lesion volume had significant effects on the reduction rate.

• The Korean Society of Law and Medicine
• /
• v.16 no.2
• /
• pp.55-84
• /
• 2015

The tuberculosis is the infectious disease. Generally, the active tuberculosis patient can infect the 10 persons for one year within the daily activities like casual conversation and singing together. The infectivity of tuberculosis can continue for a life time, and infected persons can remain at risk for developing active tuberculosis. To control this contagious disease, along with the active tuberculosis patients, non-infectious but non-compliant patients who can be infectious if their immune systems become impaired have to be managed. To control the non-complaint patients, medical treatment order should be combined with the public order. Because tuberculosis is the risk of community health, the human rights like liberty and freedom of movement can be restricted for public welfare under the article 37(2) of constitution. Even when such restriction is imposed, no essential aspect of the freedom or right shall be violated. The degree of restriction on the rights of citizens is different what methods are chosen to non-complaint patients. For example, under the directly observed therapy program, the patients and medical staffs make an appointment and meet to confirm the drug intakes according to the schedule, which is the medical treatment combined with the mildest public order. If the patients break the appointments or have the history of disobedient, the involuntary detention can obtain the legitimate cause. The Tuberculosis Prevention Act has the two step programs on this involuntary detention, The admission order (Article 15) is issued when the patients are infectious. The quarantine order (Artle 15-2) is issued when the patients are infectious and non-complaint. The legal criteria for involuntary detention are discussed and published through the international conventions and covenants. For example, World Health Organization had made guidance on human rights and involuntary detention for tuberculosis control. The restrictions should be carried out in accordance with the our law and in the legitimate objective of public interest. And the restriction should be based on scientific evidence and not imposed in an unreasonable or discriminatory manner. We define and adopt these international criteria under our constitution and legal system. Least restrictive alternative principle, proportionality principle and the individual evaluation methods are explained through the reviews of United States court decisions. Habeas Corpus Act is reviewed and adopted as the procedural due process to protect the patient rights as a citizen. Along with that, what conditions and facilities which are needed to performed quarantine order are discussed.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.281-287
• /
• 2014

This study was carried out to investigate the effect of transplanting methods on the growth and yield of paprika (Capsicumannuum L. 'Veyron' and 'Coletti') in coir culture during two seasons. The summer type sowed in late winter and harvested from summer and the winter type sowed in summer and harvested from early winter. Control plants grown on the 10cm rockwool block were transplanted on coir slab when the 8 leaves of seedlings were emerged, while plants of the young seedling transplanting(YST) grown on the 7cm rockwool block was put on the slab at time of 2-3 leaves developed. Plants of the temporary transplanting(TT) on the 10cm rockwool block were moved on the slab after 2-3 weeks underpinning cultivation, while plants of the blockless transplanting(BT) were directly transplanted in the slab when the seedlings have 2-3 leaves emerged. The plant height of the control and BT treatment were longer while that of TT showed the shortest among treatments. The bigger leaf size was observed in the YST and BT treatment. Leaf number of the BT treatment was increased, while that of TT was the lowest. There were no differences in fruit size, locules and thickness among treatments. The lower fruit weight was observed in the TT of the winter culture and fruits in the control and YST of the summer culture showed higher fruit weight. The percentage of marketable fruit appeared to be slightly higher in the winter culture than in the summer culture. There were no differences in marketable fruit rate among the treatments of the winter culture but, among the summer culture, the highest marketable fruit rate was observed in the BT with 93%. The yield of the YST and BT was higher and that of the TT was the lowest.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.1
• /
• pp.85-97
• /
• 2007

Statement of problem: Recently, anodic oxidation of cp-titanium is a popular method for treatment of titanium implant surfaces. It is a relatively easy process, and the thickness, structure, composition, and the microstructure of the oxide layer can be variably modified. Moreover the biological properties of the oxide layer can be controlled. Purpose: In this study, the roughness, microstructure, crystal structure of the variously treated groups (current, voltage, frequency, electrolyte, thermal treatment) were evaluated. And the specimens were soaked in simulated body fluid (SBF) to evaluate the effects of the surface characteristics and the oxide layers on the bioactivity of the specimens which were directly related to bone formation and integration. Materials and methods: Surface treatments consisted of either anodization or anodization followed thermal treatment. Specimens were divided into seven groups, depending on their anodizing treatment conditions: constant current mode (350V for group 2), constant voltage mode (155V for group 3), 60 Hz pulse series (230V for group 4, 300V for group 5), and 1000 Hz pulse series (400V for group 6, 460V for group 7). Non-treated native surfaces were used as controls (group 1). In addition, for the purpose of evaluating the effects of thermal treatment, each group was heat treated by elevating the temperature by $5^{\circ}C$ per minute until $600^{\circ}C$ for 1 hour, and then bench cured. Using scanning electron microscope (SEM), porous oxide layers were observed on treated surfaces. The crystal structures and phases of titania were identified by thin-film x-ray diffractmeter (TF-XRD). Atomic force microscope (AFM) was used for roughness measurement (Sa, Sq). To evaluate bioactivity of modified titanium surfaces, each group was soaked in SBF for 168 hours (1 week), and then changed surface characteristics were analyzed by SEM and TF-XRD. Results: On basis of our findings, we concluded the following results. 1. Most groups showed morphologically porous structures. Except group 2, all groups showed fine to coarse convex structures, and the groups with superior quantity of oxide products showed superior morphology. 2. As a result of combined anodization and thermal treatment, there were no effects on composition of crystalline structure. But, heat treatment influenced the quantity of formation of the oxide products (rutile / anatase). 3. Roughness decreased in the order of groups 7,5,2,3,6,4,1 and there was statistical difference between group 7 and the others (p<0.05), but group 7 did not show any bioactivity within a week. 4. In groups that implanted ions (Ca/P) on the oxide layer through current and voltage control, showed superior morphology, and oxide products, but did not express any bioactivity within a week. 5. In group 3, the oxide layer was uniformly organized with rutile, with almost no titanium peak. And there were abnormally more [101] orientations of rutile crystalline structure, and bonelike apatite formation could be seen around these crystalline structures. Conclusion: As a result of control of various factors in anodization (current, voltage, frequency, electrolytes, thermal treatment), the surface morphology, micro-porosity, the 2nd phase formation, crystalline structure, thickness of the oxide layer could be modified. And even more, the bioactivity of the specimens in vitro could be induced. Thus anodic oxidation can be considered as an excellent surface treatment method that will able to not only control the physical properties but enhance the biological characteristics of the oxide layer. Furthermore, it is recommended in near future animal research to prove these results.

• The Korean Journal of Pharmacology
• /
• v.30 no.1
• /
• pp.19-28
• /
• 1994

The effects of gonadoropin-releasing hormone (GnRH) and ovarian steroid hormones on the release of luteinizing hormone (LH) and its subunit mRNA levels were investigated in anterior pituitary cells in culture. LH concentration was measured by a specific radioimmunoassay and mRNA levels of u and $LH{\beta}$ subunits by RNA slot blot hybridization assay. GnRH stimulated LH release in a dose-dependent manner from cultured pituitary cells. However, the basal LH release in the absence of GnRH was not changed during the course of 24h culture, strongly suggesting that release of LH is directly controlled by GnRH. The treatment of the pituitary cells with GnRH increased $LH{\beta}$ subunit mRNA levels in a dose-dependent manner, reaching the maximum with $2\;{\times}\;10^{-10}M$ GnRH while no significant increase in ${\alpha}$ subunit mRNA levels was observed after GnRH treatment. Estradiol did not augment GnRH-induced LH release while progesterone augmented GnRH-induced LH release in a dose-dependent manner at the level of pituitary. However, estradiol and progesterone increased basal and GnRH-induced $LH{\beta}$ subunit mRNA levels in a dose-dependent manner. The treatment of estrogen antagonist, LYI17018 blocked the effect of estradiol on GnRH-induced $LH{\beta}$ subunit mRNA levels in a dose-dependent manner while progesterone antagonist, Ru486 tended to block the effect of progesterone on GnRH-induced $LH{\beta}$ subunit mRNA levels. It is therefore suggested that GnRH Playa a major role in LH release and subunit biosynthesis by influencing the steady state $LH{\beta}$ subunit mRNA loves and ovarian steroid hormones modulate subunit biosynthesis via directly acting on pituitary gonadotropes.