• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.2113-2116
• /
• 2007

In this study, transmission and reflection of multi-directional random waves propagating over multi-arrayed submerged breakwaters are investigated using eigenfunction expansion method. The numerical analysis on the wave energy reflection of submerged breakwaters with various crown widths is carried out. Strong wave reflection is occurred at the Bragg reflection condition of the peak frequency. When relative heights and crown widths of breakwaters are equal to 0.6 and 0.4h, respectively, more than 25% of wave energy is reflected to off shore.

• 전자공학회논문지D
• /
• 제35D권7호
• /
• pp.25-31
• /
• 1998

Modal transmission-line is utilized to analyze the power coupling of optical directional coupler composed by two parallel guiding slabs. By defining a coupling efficiency .eta. amenable to rigorous supermodes and boundary conditions of modal functions, we evaluate the power transfer for TE mode of gainy coupler. The results reveal that optimized power exchange occurs at a novel wavelength .lambda.$_{op}$ , which is generally different from minimum gap .lambda.$_{min}$ between rigorous modes and phase-matching condition .lambda.$_{ph}$ .

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.945-948
• /
• 2000

The coupling properties of supermodes guided by grating-assisted directional couplers (GADCs) can be phrased in rigorous modal theory. Such a modal solution for TE modes expressed by simple electrical transmission-line networks is utilized to analyze the power distribution of GADCS with three guiding channels. In particular, the modal transmission-line theory can serve as a template for computational algorithms that systematically evaluate the coupling efficiency that are not readily obtained by other methods.

• 드라이브 ㆍ 컨트롤
• /
• 제14권2호
• /
• pp.1-8
• /
• 2017

The spool displacement of a directional control valve can be considered as the standard signal for the measurement of its bandwidth frequency. When the spool displacement is not available, the metering-orifice system is suggested in this study as an alternative way to measure the - 3 dB amplitude-ratio bandwidth frequency of the hydraulic directional-control valve. The amplitude ratio of the metering-orifice pressure can be adjusted to equal that of the spool displacement through the controlling of the metering-orifice opening area. A series of experiments were conducted to verify the effectiveness of the metering-orifice system. The metering orifice was confirmed as adequate for the measurement of the - 3 dB amplitude-ratio bandwidth frequency.

• 한국통신학회논문지
• /
• 제32권2C호
• /
• pp.124-131
• /
• 2007

본 논문에서는 전송 에러로 인해 발생하는 영상의 손실을 정밀한 방향성 보간(FDI: Fine Directional Interpolation)을 이용하여 복원하는 기법을 제안한다. 제안된 알고리즘은 공간 방향 벡터(SDV: Spatial Direction Vector)를 도입한다. 공간 방향 벡터는 손실블럭 주위의 영상 데이터의 에지 정보를 추출하여 구한다. 이 후 손실된 영상 블록은 공간 방향 벡터를 이용하여 픽셀단위로 적응적으로 보간함으로써 복원된다. 이러한 방식은 평탄한 영역뿐만 아니라 에지를 포함한 복잡한 영역도 우수하게 복원할 수 있다. 실험결과 제안된 방식은 기존의 공간적 에러은닉 방법과 비교하여 성능이 우수하다는 것을 알 수 있다.

• 한국해안해양공학회지
• /
• 제19권1호
• /
• pp.29-37
• /
• 2007

본 연구에서는 고유함수전개법을 사용하여 다열 불투과성 수중방파제를 통과하는 다방향 불규칙파랑의 통과와 반사를 계산하였다. 입사하는 다방향 불규칙파랑은 Bretschneider-Mitsuyasu 주파수 스펙트럼과 Mitsuyasu 타입의 방향스펙트럼을 사용하여 재현하였다. 첨두주파수의 Bragg 반사 조건에서 강한 반사가 발행하였다. 수중 방파제가 3열이고, 상대높이가 0.6일 때 입사하는 다방향 불규칙파 에너지의 25% 이상이 외해로 반사되었다. 그리고, 최대분산계수 $s_{max}$가 증가할 경우, 다방향 불규칙파랑의 반사율도 증가하였다.

• Journal of Communications and Networks
• /
• 제11권5호
• /
• pp.433-444
• /
• 2009

The bi-directional relay channel is the natural extension of a three-terminal relay channel where node a transmits to node b with the help of a relay r to allow for two-way communication between nodes a and b. That is, in a bi-directional relay channel, a and b wish to exchange independent messages over a shared channel with the help of a relay r. The rates at which this communication may reliably take place depend on the assumptions made on the relay processing abilities. We overview information theoretic limits of the bi-directional relay channel under a variety of conditions, before focusing on half-duplex nodes in which communication takes place in a number of temporal phases (resulting in protocols), and nodes may forward messages in four manners. The relay-forwarding considered are: Amplify and forward (AF), decode and forward (DF), compress and forward (CF), and mixed forward. The last scheme is a combination of CF in one direction and DF in the other. We derive inner and outer bounds to the capacity region of the bi-directional relay channel for three temporal protocols under these four relaying schemes. The first protocol is a two phase protocol where a and b simultaneously transmit during the first phase and the relay r alone transmits during the second. The second protocol considers sequential transmissions from a and b followed by a transmission from the relay while the third protocol is a hybrid of the first two protocols and has four phases. We provide a comprehensive treatment of protocols in Gaussian noise, obtaining their respective achievable rate regions, outer bounds, and their relative performance under different SNR and relay geometries.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1264-1271
• /
• 1999

In this paper, an efficient method of analysis and design of fault detection filter is presented. Since the directional constraint is applied to the eigenstructure associated with the detection space, an eigenvector is determined by the eigenvalues associated with other eigenvectors. Further, the assignment of a pair of eigenvalue and eigenvector leads to the fixation of overall eigenstructure related with the detection space. Using the transmission zeros and the transmission zero vectors, these phenomenon are clearly proven, and an efficient algorithm for design of the fault detection filters is presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.434-436
• /
• 1996

This paper deals with the signal communication system for MAGLEV which is indispensible to train control with safety and high speed operation. Therefore it is necessary for signal system to ensure high speed transmission. massive transmission, low error rate, and reliability of information. And the ensured information should be transmitted between ground and on-board for safety and high speed operation. For these reasons, we have considered the guaranteed reliability by applying FSK method and HDLC protocol. Because HDLC has the advantages of high efficiency, high reliability, low bit rate, and bit transparency. HDLC is the appropriate method for data transmission in MAGLEV.

• Wind and Structures
• /
• 제35권2호
• /
• pp.93-108
• /
• 2022

Steel tubular towers are commonly used in UHV and long crossing transmission lines. By considering effects of the model scale, the solidity ratio and the ratio of the mean width to the mean height, wind tunnel tests under different wind speeds on twenty tubular steel tower body models and twenty-six tubular steel cross-arm models were completed. Drag coefficients and shielding factors of the experimental tower body models and cross-arm models in wind directional axis for typical skewed angles were obtained. The influence of the lift forces on the skewed wind load factors of tubular steel tower bodies was evaluated. The skewed wind load factors, the wind load distribution factors in transversal and longitudinal direction were calculated for the tubular tower body models and cross-arm models, respectively. Fitting expressions for the skewed wind load factors of tubular steel bodies and cross-arms were determined through nonlinear fitting analysis. Parameters for skewed wind loads determined by wind tunnel tests were compared with the regulations in applicable standards. Suggestions on the drag coefficients, the skewed wind load factors and the wind load distribution factors were proposed for tubular steel transmission towers.