• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2113-2116
• /
• 2007

In this study, transmission and reflection of multi-directional random waves propagating over multi-arrayed submerged breakwaters are investigated using eigenfunction expansion method. The numerical analysis on the wave energy reflection of submerged breakwaters with various crown widths is carried out. Strong wave reflection is occurred at the Bragg reflection condition of the peak frequency. When relative heights and crown widths of breakwaters are equal to 0.6 and 0.4h, respectively, more than 25% of wave energy is reflected to off shore.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.7
• /
• pp.25-31
• /
• 1998

Modal transmission-line is utilized to analyze the power coupling of optical directional coupler composed by two parallel guiding slabs. By defining a coupling efficiency .eta. amenable to rigorous supermodes and boundary conditions of modal functions, we evaluate the power transfer for TE mode of gainy coupler. The results reveal that optimized power exchange occurs at a novel wavelength .lambda.$_{op}$ , which is generally different from minimum gap .lambda.$_{min}$ between rigorous modes and phase-matching condition .lambda.$_{ph}$ .

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.945-948
• /
• 2000

The coupling properties of supermodes guided by grating-assisted directional couplers (GADCs) can be phrased in rigorous modal theory. Such a modal solution for TE modes expressed by simple electrical transmission-line networks is utilized to analyze the power distribution of GADCS with three guiding channels. In particular, the modal transmission-line theory can serve as a template for computational algorithms that systematically evaluate the coupling efficiency that are not readily obtained by other methods.

• Journal of Drive and Control
• /
• v.14 no.2
• /
• pp.1-8
• /
• 2017

The spool displacement of a directional control valve can be considered as the standard signal for the measurement of its bandwidth frequency. When the spool displacement is not available, the metering-orifice system is suggested in this study as an alternative way to measure the - 3 dB amplitude-ratio bandwidth frequency of the hydraulic directional-control valve. The amplitude ratio of the metering-orifice pressure can be adjusted to equal that of the spool displacement through the controlling of the metering-orifice opening area. A series of experiments were conducted to verify the effectiveness of the metering-orifice system. The metering orifice was confirmed as adequate for the measurement of the - 3 dB amplitude-ratio bandwidth frequency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2C
• /
• pp.124-131
• /
• 2007

This paper presents a block loss recovery technique for the image block data corrupted by transmission losses through the employment of fine directional interpolation (FDI). The proposed algorithm introduces a spatial direction vector (SDV). The SDVs are extracted from the edge information of the neighboring image data. Subsequently, the SDVs are adaptively applied to interpolate lost pixels on a pixel-by-pixel basis. This approach improves the capability to more reliably recover high-detailed contents in the corrupted block. Experimental results demonstrate that the FDI method performs better as compared to previous techniques.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.1
• /
• pp.29-37
• /
• 2007

In this study, transmission and reflection of multi-directional random waves propagating over impermeable submerged breakwaters are calculated by using eigenfunction expansion method. A series of mutiderectional random waves is generated by using the Bretschneider-Mitsuyasu frequency and Mitsuyasu type directional spectrum. Strong reflection is occurred at the Bragg reflection condition of the peak frequency. If the row of breakwaters is fixed at 3 and the relative height of breakwater is fixed at 0.6, more than 25% of incident wave energy is reflected to offshore. It is also found that the reflection of directionally spreading random waves increases as the maximum spreading parameter $s_{max}$ increases.

• Journal of Communications and Networks
• /
• v.11 no.5
• /
• pp.433-444
• /
• 2009

The bi-directional relay channel is the natural extension of a three-terminal relay channel where node a transmits to node b with the help of a relay r to allow for two-way communication between nodes a and b. That is, in a bi-directional relay channel, a and b wish to exchange independent messages over a shared channel with the help of a relay r. The rates at which this communication may reliably take place depend on the assumptions made on the relay processing abilities. We overview information theoretic limits of the bi-directional relay channel under a variety of conditions, before focusing on half-duplex nodes in which communication takes place in a number of temporal phases (resulting in protocols), and nodes may forward messages in four manners. The relay-forwarding considered are: Amplify and forward (AF), decode and forward (DF), compress and forward (CF), and mixed forward. The last scheme is a combination of CF in one direction and DF in the other. We derive inner and outer bounds to the capacity region of the bi-directional relay channel for three temporal protocols under these four relaying schemes. The first protocol is a two phase protocol where a and b simultaneously transmit during the first phase and the relay r alone transmits during the second. The second protocol considers sequential transmissions from a and b followed by a transmission from the relay while the third protocol is a hybrid of the first two protocols and has four phases. We provide a comprehensive treatment of protocols in Gaussian noise, obtaining their respective achievable rate regions, outer bounds, and their relative performance under different SNR and relay geometries.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.10
• /
• pp.1264-1271
• /
• 1999

In this paper, an efficient method of analysis and design of fault detection filter is presented. Since the directional constraint is applied to the eigenstructure associated with the detection space, an eigenvector is determined by the eigenvalues associated with other eigenvectors. Further, the assignment of a pair of eigenvalue and eigenvector leads to the fixation of overall eigenstructure related with the detection space. Using the transmission zeros and the transmission zero vectors, these phenomenon are clearly proven, and an efficient algorithm for design of the fault detection filters is presented.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.434-436
• /
• 1996

This paper deals with the signal communication system for MAGLEV which is indispensible to train control with safety and high speed operation. Therefore it is necessary for signal system to ensure high speed transmission. massive transmission, low error rate, and reliability of information. And the ensured information should be transmitted between ground and on-board for safety and high speed operation. For these reasons, we have considered the guaranteed reliability by applying FSK method and HDLC protocol. Because HDLC has the advantages of high efficiency, high reliability, low bit rate, and bit transparency. HDLC is the appropriate method for data transmission in MAGLEV.

• Wind and Structures
• /
• v.35 no.2
• /
• pp.93-108
• /
• 2022

Steel tubular towers are commonly used in UHV and long crossing transmission lines. By considering effects of the model scale, the solidity ratio and the ratio of the mean width to the mean height, wind tunnel tests under different wind speeds on twenty tubular steel tower body models and twenty-six tubular steel cross-arm models were completed. Drag coefficients and shielding factors of the experimental tower body models and cross-arm models in wind directional axis for typical skewed angles were obtained. The influence of the lift forces on the skewed wind load factors of tubular steel tower bodies was evaluated. The skewed wind load factors, the wind load distribution factors in transversal and longitudinal direction were calculated for the tubular tower body models and cross-arm models, respectively. Fitting expressions for the skewed wind load factors of tubular steel bodies and cross-arms were determined through nonlinear fitting analysis. Parameters for skewed wind loads determined by wind tunnel tests were compared with the regulations in applicable standards. Suggestions on the drag coefficients, the skewed wind load factors and the wind load distribution factors were proposed for tubular steel transmission towers.