• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2E
• /
• pp.30-45
• /
• 2001

This study considers the environmental factors affecting propagation loss and sonar performance in the continental regions of the East Coast Sea of Korea. Water mass distributions appear to change dramatically in a few weeks. Simple calculation with the case when the NKCW (North Korean Cold Water) develops shows that the difference in propagation loss may reach in the worst up to 10dB over range 5km. Another factor, an eddy, has typical dimensions of 100-200km in diameter and 150-200m in thickness. Employing a typical eddy and assuming frequency to be 100Hz, its effects on propagation loss appear to make lower the normal formation of convergence zones with which sonars are possible to detect long-range targets. The change of convergence zones may result in 10dB difference in received signals in a given depth. Thermal fronts also appear to be critical restrictions to operating sonars in shallow waters. Assuming frequency to be 200Hz, thermal fronts can make 10dB difference in propagation loss between with and without them over range 20km. An observation made in one site in the East Coast Sea of Korea reveals that internal waves may appear in near-inertial period and their spectra may exist in periods 2-17min. A simulation employing simple internal wave packets gives that they break convergence zones on the bottom, causing the performance degradation of FOM as much as 4dB in frequency 1kHz. An acoustic experiment, using fixed source and receiver at the same site, shows that the received signals fluctuate tremendously with time reaching up to 6.5dB in frequencies 1kHz or less. Ambient noises give negative effects directly on sonar performance. Measurements at some sites in the East Coast Sea of Korea suggest that the noise levels greatly fluctuate with time, for example noon and early morning, mainly due to ship traffics. The average difference in a day may reach 10dB in frequency 200Hz. Another experiment using an array of hydrophones gives that the spectrum levels of ambient noises are highly directional, their difference being as large as 10dB with vertical or horizontal angles. This fact strongly implies that we should obtain in-situ information of noise levels to estimate reasonable sonar performance. As one of non-stationary noise sources, an eel may give serious problems to sonar operation on or under the sea bottoms. Observed eel noises in a pier of water depth 14m appear to have duration time of about 0.4 seconds and frequency ranges of 0.2-2.8kHz. The 'song'of an eel increases ambient noise levels to average 2.16dB in the frequencies concerned, being large enough to degrade detection performance of the sonars on or below sediments. An experiment using hydrophones in water and sediment gives that sensitivity drops of 3-4dB are expected for the hydrophones laid in sediment at frequencies of 0.5-1.5kHz. The SNR difference between in water and in sediment, however, shows large fluctuations rather than stable patterns with the source-receiver ranges.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.1
• /
• pp.100-110
• /
• 1994

In this paper, we present a new analysis of monolithic laser-waveguide coupling structure employing the beam propagation method. Monolithic laser-waveguide coupler has both passive and active components It has too many parameters to consider for an analysis. So we present proper model of coupler by use of directional coupler. We employ the beam propagation method th analyze the proposed structure, we could employ the coupled mode theory but we thought in the case of this paper the beam propagation method is more appropriate than coupler mode theorybecause a number of variables which to consider is too many for the coupled mode theory. Also we use finite difference method to calcurate trial field which is a starting point of beam propagation analysis. Through this approach, we can consider more parameters. And we propose a new structure of monolothic laser-waveguide coupler which has taper structure between the distance in which coupling is taking place and passive waveguide. We can obtain 79% high coupling efficiency from our structure.

• Journal of the Korean association of regional geographers
• /
• v.23 no.1
• /
• pp.136-150
• /
• 2017

This study analyzed the spatial change of urban green spaces in Daegu from 1989 to 2009 using cell based spatial metrics. To do so, the conversion process of land covers during the past 20 years was explored using a land cover change detection matrix. The synoptic analysis with a moving window sampling strategy was conducted to quantify cell based spatial metrics related to size, shape, cohesion, and diversity and to explain the spatial change at the local level. Difference maps were then generated by subtracting the 1989 maps of spatial metrics from the 1998 maps and the 1998 maps from the 2009 maps. The gradient analysis was performed to identify the directional change of spatial metrics along an urban development axis in Daegu. The results from this study show that urban green spaces in Daegu during the past 20 years have been gradually fragmented around the new town housing development districts such as Dalseong-gun, Seongseo, and Ansim. Forests were most prominently fragmented in the Hwawon area while most rapidly in the Chilgok area. Grasslands were largely fragmented in many areas due to the decrease in size and cohesion indices and most fragmented in the Ansim area. The spatial pattern of the decreased and fragmented urban green spaces identified by this study can be used as a base data for establishing the environment-friendly urban development strategy in Daegu.

• Journal of Korean Port Research
• /
• v.10 no.2
• /
• pp.91-101
• /
• 1996

Today transportation problems are severer with the increase of the vehicles and travel demand in urban areas, but could not be completely solved with only the expansion of the new transportation facilities. Because the expansion of the new transportation facilities are limited in urban areas. As one of the Transportation System Management(TSM) techniques in this study, the simulation results of the existing signal systems which were operated based upon the peak time periods for increasing the efficiency on the pretimed signalized intersections(PSI) during the different time periods : the AM on-Peak, the AM off-Peak, the PM off-Peak, and the PM on-Peak, were as follows : i) There was no distinct difference in the total traffic volumes concentrated on the signalized intersections during the different time periods, but a considerably big difference in the directional traffic volumes for those time periods. ii) There were about 53% reduction of the average delay and 51% reduction of the fuel consumption when applying the different signal systems to the different time periods regardless of the CBD and Non-CBD. iii) There were about 36% increase of the average delay and 33% increase of the fuel consumption when applying the same signal systems during the peak time periods to the different time periods regardless of the CBD and Non-CBD. Based on the above results, it was concluded that constructing the different signal systems for the different time periods would be better than construction the same ones for those periods on the pretimed signalized intersections in urban areas.

• Journal of Intelligence and Information Systems
• /
• v.17 no.3
• /
• pp.187-201
• /
• 2011

KOSPI200 index is the Korean stock price index consisting of actively traded 200 stocks in the Korean stock market. Its base value of 100 was set on January 3, 1990. The Korea Exchange (KRX) developed derivatives markets on the KOSPI200 index. KOSPI200 index futures market, introduced in 1996, has become one of the most actively traded indexes markets in the world. Traders can make profit by entering a long position on the KOSPI200 index futures contract if the KOSPI200 index will rise in the future. Likewise, they can make profit by entering a short position if the KOSPI200 index will decline in the future. Basically, KOSPI200 index futures trading is a short-term zero-sum game and therefore most futures traders are using technical indicators. Advanced traders make stable profits by using system trading technique, also known as algorithm trading. Algorithm trading uses computer programs for receiving real-time stock market data, analyzing stock price movements with various technical indicators and automatically entering trading orders such as timing, price or quantity of the order without any human intervention. Recent studies have shown the usefulness of artificial intelligent systems in forecasting stock prices or investment risk. KOSPI200 index data is numerical time-series data which is a sequence of data points measured at successive uniform time intervals such as minute, day, week or month. KOSPI200 index futures traders use technical analysis to find out some patterns on the time-series chart. Although there are many technical indicators, their results indicate the market states among bull, bear and flat. Most strategies based on technical analysis are divided into trend following strategy and non-trend following strategy. Both strategies decide the market states based on the patterns of the KOSPI200 index time-series data. This goes well with Markov model (MM). Everybody knows that the next price is upper or lower than the last price or similar to the last price, and knows that the next price is influenced by the last price. However, nobody knows the exact status of the next price whether it goes up or down or flat. So, hidden Markov model (HMM) is better fitted than MM. HMM is divided into discrete HMM (DHMM) and continuous HMM (CHMM). The only difference between DHMM and CHMM is in their representation of state probabilities. DHMM uses discrete probability density function and CHMM uses continuous probability density function such as Gaussian Mixture Model. KOSPI200 index values are real number and these follow a continuous probability density function, so CHMM is proper than DHMM for the KOSPI200 index. In this paper, we present an artificial intelligent trading system based on CHMM for the KOSPI200 index futures system traders. Traders have experienced on technical trading for the KOSPI200 index futures market ever since the introduction of the KOSPI200 index futures market. They have applied many strategies to make profit in trading the KOSPI200 index futures. Some strategies are based on technical indicators such as moving averages or stochastics, and others are based on candlestick patterns such as three outside up, three outside down, harami or doji star. We show a trading system of moving average cross strategy based on CHMM, and we compare it to a traditional algorithmic trading system. We set the parameter values of moving averages at common values used by market practitioners. Empirical results are presented to compare the simulation performance with the traditional algorithmic trading system using long-term daily KOSPI200 index data of more than 20 years. Our suggested trading system shows higher trading performance than naive system trading.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.96-104
• /
• 2009

In this paper, we propose a no-reference objective Quality assessment metrics of image. The blockiness and blurring of edge areas which are sensitive to the human visual system are modeled as step functions. Blocking and blur metrics are obtained by estimating local visibility of blockiness and edge width, For the blocking metric, horizontal and vertical blocking lines are first determined by accumulating weighted differences of adjacent pixels and then the local visibility of blockiness at the intersection of blocking lines is obtained from the total difference of amplitudes of the 2-D step function which is modelled as a blocking region. The blurred input image is first re-blurred by a Gaussian blur kernel and an edge mask image is generated. In edge blocks, the local edge width is calculated from four directional projections (horizontal, vertical and two diagonal directions) using local extrema positions. In addition, the kurtosis and SSIM are used to compute the blur metric. The final no-reference objective metric is computed after those values are combined using an appropriate function. Experimental results show that the proposed objective metrics are highly correlated to the subjective data.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.1
• /
• pp.69-78
• /
• 2002

In order to examine the directional suitability of the axis direction of the fishing gear against the current, the experiments were carried out at the bamboo weir in Samchunpo water area from January, 2000 to September, 2001 The results of the study are as follows: In the experimental fishing gear constructed in the "V" shape, the range between two reference piles located at the entrance was 2.5m. The direction of bamboo weir′s axis was 355.5$^{\circ}$ The length of the left wing and those from the reference pile to the starting point of a curve were 106.0m, 7.5m, respectively. The length of the right wing and those from the reference pile to the starting point of a curve were 79.0m, 10.0m, respectively. Depths around the left and right stone wall that drove the steel pile were 5.0~6.5m and 6.5~9.5m, respectively. Also, depths on the bamboo weir′s axis and around the sack were 7.0~8.0m and about 8.0m, respectively. The maximum height of stone walls at the point of the left wing, the right wing and around the sack on the bamboo weir\` axis were 3.0m, 4.7m and 4.0m, respectively, Widths of stone walls at the point of both of the wings and around the sack on the bamboo weir\`s axis were 10.0~l4.0m, 22.0~25.0m, respectively. The averaging current direction on ebb tide was measured two times and it was 169.2$^{\circ}$ but the direction had about a 6.3$^{\circ}$ difference from the bamboo weirs axis. The maximum current speed appeared two to three hours later from the time of high tide and the current speed over 80.0cm/s lasted during about two Hours on the ebb tide In the case of a straight type wing In the bamboo weir, the eddy out of the left wing was comparatively big and the current on the right side from the bamboo weir′s axis had a tendency in turning to the right wing side. But in the case of a curve type wing, the eddy and tendency reduced significantly. It was thought that the experimental fishing gear was set suitably from the result of this simulation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.531-541
• /
• 2020

In this study, a computed tide of a real tide was introduced to improve the numerical solutions for tides and tidal flow simulations. The real tide was defined considering the nodal modulation amplitude, phase correction factor, astronomical argument, and tidal harmonic constants of all the constituents. The numerical simulation was performed using the real tide parameters for the west-south coastal waters of Korea, where the observation data for tides, tidal currents, waves, and winds over two seasons exist. The tidal flow simulation of the real tide was simulated successfully. The correlation coefficient between the observed and calculated values was 1.0, which indicated both accurate amplitude and phase. The U- and V-components of the tidal current obtained for the real tide had average valid correlations of 0.83 and 0.936, respectively. The speed error for the residual current was 0.006 m/s on the average, which indicated an insignificant difference, and the directional behavior of the residual current was very similar. In addition, the velocity error was attributed to various weather effects, such as high waves and wind storms. Therefore, this model is expected to improve current solutions provided that weathering forces, such as waves and winds, are considered.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.42-51
• /
• 2007

An AC electrical railroad system has rapidly changing dynamic single-phase load, and at a feeding substation, three-phase electric power is transformed to the paired directional single-phase electric power. There is a great difference in electrical phenomenon between the load of AC electrical railroad system and that of general power system. Electric characteristics of AC electrical railroad's trainload are changed continuously according to the traction, operating characteristic, operating schedule, track slope, etc. Because of the long feeding distance of the dynamic trainload, power quality problems such as voltage drop, voltage imbalance and harmonic distortion my also occur to AC electrical railroad system. These problems affect not only power system stability, but also power quality deterioration in AC electrical railroad system. The dynamic simulation model of AC electrical railroad system presented by PSCAD/EMTDC is modeled in this paper, andthen, it is analyzed voltage drop for AC electrical railroad system both with single-phase distributed STATCOM(Static Synchronous Compensator) installed at SP(Sectioning Post) and without.

• Journal of Korean Society of Transportation
• /
• v.21 no.5
• /
• pp.61-71
• /
• 2003

Existent DDHV draws and is calculating K coefficient. D coefficient from sum of traffic volume two-directions time. There is difference of design order and actuality order, error of DDHV estimation value, problem of irregular change etc. of DDHV thereby. In this study, among traffic volume of each other independent two direction(going up, going down), decide design target order in the directional traffic volume, presented way(way) applying without separating K coefficient and D coefficient at the same time. The result were analysis about national highway permanent count point 360 points 30 orders by existing DDHV estimation value method(separation plan) analysis wave and following variation appear. - design order and actuality order are collision at 357 agencies(99.2%) - actuality order special quality : Measuring efficiency of average 80 orders, maximum 1,027 order, minimum 2 orders - error distribution of design order and actuality order : inside 10 hours is(30$\pm$10hour) 106 points(29.4%), 254 points(70.6%) more than 30 orders and $\pm$10 orders error occurrence be - DDHV estimation value : Average 8.4%, maximum 46.7% The other side, average 50 orders. error improvement effect of DDHV 8.4% was analysed that is at design hourly volume computation by inseparability method in case of AADT premises correct thing because inseparability plan agrees actuality order at whole agency with design order and measuring efficiency of DDHV estimation value is "0".t;0".uot;.