• Journal of Korea Multimedia Society
• /
• v.25 no.4
• /
• pp.568-574
• /
• 2022

In this paper, direction normalization and CNN deep learning are used to develop a more reliable license plate recognition system. The existing license plate recognition system consists of three main modules: license plate detection module, character segmentation module, and character recognition module. The proposed system minimizes recognition error by adding a direction normalization module when a detected license plate is inclined. Experimental results show the superiority of the proposed method in comparison to the previous system.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.121-127
• /
• 2005

There is a necessity for the communication between intelligent robots and human beings because of wide spread use of them. Gesture recognition is currently being studied in regards to better conversing. On the basis of previous research, however, the gesture recognition algorithms appear to require not only complicated algorisms but also separate training process for high recognition rates. This study suggests a gesture recognition algorithm based on computer vision system, which is relatively simple and more efficient in recognizing various human gestures. After tracing the hand gesture using a marker, direction changes of the gesture trajectory were analyzed to determine the simple gesture code that has minimal information to recognize. A map is developed to recognize the gestures that can be expressed with different gesture codes. Through the use of numerical and geometrical trajectory, the advantages and disadvantages of the suggested algorithm was determined.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.2
• /
• pp.3-9
• /
• 2009

When washing machine is rotated in the laundry, it tends to lean toward one side. This tendency causes a serious vibration. The balance of washing machine plays an important role in order to reduce the vibration by injecting the sand or the salt water into the balance of washing machine. The hot plate welder is used to prevent from outflow of contents. The hot plate welder brings about many problems which is concerned with accidents. The direction recognition and location information of the balance are required in this system. In this paper, the recognition direction of balance in washing machine using machine vision system is studied. The template matching algorithm compares sub-image with original image acquired in real-time to obtain a center point of balance image. The mid points and the edges of balance are estimated by the edge detection and gauging algorithms. The data acquired by these results is used for recognition direction of balance. The automation software for image processing is developed by using LabVIEW.

• Journal of Korea Multimedia Society
• /
• v.11 no.12
• /
• pp.1676-1687
• /
• 2008

In this paper, we proposed a new multi-view human recognition method based on face and gait features detection algorithm. For getting the position of moving object, we used the different of two consecutive frames. And then, base on the extracted object, the first important characteristic, walking direction, will be determined by using the contour of head and shoulder region. If this individual appears in camera with frontal direction, we will use the face features for recognition. The face detection technique is based on the combination of skin color and Haar-like feature whereas eigen-images and PCA are used in the recognition stage. In the other case, if the walking direction is frontal view, gait features will be used. To evaluate the effect of this proposed and compare with another method, we also present some simulation results which are performed in indoor and outdoor environment. Experimental result shows that the proposed algorithm has better recognition efficiency than the conventional sing]e view recognition method.

• The KIPS Transactions:PartB
• /
• v.17B no.1
• /
• pp.1-8
• /
• 2010

The researches about gaze recognition which current user gazes and finds the location have increasingly developed to have many application. The gaze recognition of existence all about researches have got problems because of using equipment that Infrared(IR) LED, IR camera and head-mounted of high price. This study propose and implement the gaze recognition system based on SVM using a single PC Web camera. The proposed system that divide the gaze location of 36 per 9 and 4 to recognize gaze location of 4 direction and 9 direction recognize user's gaze. Also, the proposed system had apply on image filtering method using difference image entropy to improve performance of gaze recognition. The propose system was implements experiments on the comparison of proposed difference image entropy gaze recognition system, gaze recognition system using eye corner and eye's center and gaze recognition system based on PCA to evaluate performance of proposed system. The experimental results, recognition rate of 4 direction was 94.42% and 9 direction was 81.33% for the gaze recognition system based on proposed SVM. 4 direction was 95.37% and 9 direction was 82.25%, when image filtering method using difference image entropy implemented. The experimental results proved the high performance better than existed gaze recognition system.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.6
• /
• pp.76-85
• /
• 1993

In this paper, we propose a stroke matching method for the off-line recognition of handprinted Hangul. In this method, the preprocessing steps such as position normalization, contour tracing and thinning are carried out first. Then, after extracting features such as the firection component distribution of contour, the direction component distribution of skeleton, and the distribution of structural feature points, strokes are extracted and matched based on the midpont distribution of the direction and the length of each stroke. In order to reduce the recognition time, a preliminary classification based on the direction component distribution features of the contour is performed. In order to domonstrate the performance of the proposed method, experiments with 520 most frequently used Hangul were performed, and 90.7% of correct recognition rate and 0.46second of recognition time per one character has been obtained. This results reveal that the proposed method can absorb effectively the noise in input character and the variations of stroke slant.

• Proceedings of the IEEK Conference
• /
• 2000.11c
• /
• pp.121-124
• /
• 2000

In this paper, we propose a pen gesture recognition system for user interface in multimedia terminal which requires fast processing time and high recognition rate. It is realtime and interaction system between graphic and text module. Text editing in recognition system is performed by pen gesture in graphic module or direct editing in text module, and has all 14 editing functions. The pen gesture recognition is performed by searching classification features that extracted from input strokes at pen gesture model. The pen gesture model has been constructed by classification features, ie, cross number, direction change, direction code number, position relation, distance ratio information about defined 15 types. The proposed recognition system has obtained 98% correct recognition rate and 30msec average processing time in a recognition experiment.

• Journal of Biomedical Engineering Research
• /
• v.15 no.4
• /
• pp.455-464
• /
• 1994

The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMG signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.175-178
• /
• 2001

This paper proposes a novel human-computer interaction system for the disabled using recognition of face direction. Face direction is recognized by comparing positions of center of gravity between face region and facial features such as eyes and eyebrows. The face region is first selected by using color information, and then the facial features are extracted by applying a separation filter to the face region. The process speed for recognition of face direction is 6.57frame/sec with a success rate of 92.9% without any special hardware for image processing. We implement human-computer interaction system using screen menu, and show a validity of the proposed method from experimental results.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.4
• /
• pp.9-18
• /
• 2011

In this paper, we propose a method which recognizes human activity using model-based gaze direction estimation in an indoor environment. The method consists of two steps. First, we detect a head region and estimate its gaze direction as prior information in the human activity recognition. We use color and shape information for the detection of head region and use Bayesian Network model representing relationships between a head and a face for the estimation of gaze direction. Second, we recognize event and scenario describing the human activity. We use change of human state for the event recognition and use a rule-based method with combination of events and some constraints. We define 4 types of scenarios related to the gaze direction. We show performance of the gaze direction estimation and human activity recognition with results of experiments.