• 한국전문물리치료학회지
• /
• 제28권3호
• /
• pp.227-234
• /
• 2021

Background: The serratus posterior inferior (SPI) muscle originates from the spinous process of T11-L2 and inserts at the lower border of the 9-12th ribs. This muscle is involved in thoracolumbar rotation and stability. Several positions can be used to improve trunk stability; the quadruped position is a good position for easily maintaining a neutral spine. In particular, during one arm lifting, various muscles act to maintain a neutral trunk position, and the SPI is one of these muscles. If trunk stability is weakened, uncontrolled trunk rotation may occur at this time. Tape can be used to increase trunk stability. There have been no studies on the effect of taping applied to the SPI muscle on thoracolumbar junction (TLJ) stability. Objects: This study compared the TLJ rotation angle between three different conditions (without taping, transverse taping, and SPI muscle direction taping). Methods: Thirty subjects were recruited to the study (18 males and 12 females). The TLJ rotation angle was measured during one arm lifting in a quadruped position (ALQP). Two taping methods (transverse and SPI muscle direction taping) were applied, and the TLJ rotation angle was measured in the same movement. Results: SPI muscle direction taping significantly reduced TLJ rotation compared to that without taping (p < 0.001) and with transverse taping (p < 0.001). There was a significant difference in the TLJ rotation angle between transverse taping and SPI muscle direction taping (p < 0.017). Conclusion: SPI muscle direction taping reduces the TLJ rotation angle during ALQP. Therefore, SPI muscle direction taping is one method to improve TLJ stability and reduce uncontrolled TLJ rotation during ALQP.

• 로봇학회논문지
• /
• 제3권4호
• /
• pp.331-337
• /
• 2008

The field of robots is being widely accepted as a new technology today. Many robots are produced continuously to impart amusement to people. Especially the robot which operates with a wheelbarrow was enough of a work of art to arouse excitement in the audiences. All the wheelbarrow robots share the same technology in that the direction of roll and pitch are acting as balance controllers, allowing the robots to maintain balance for a long period by continuously moving forward and backward. However one disadvantage of this technology is that they cannot avoid obstacles in their way. Therefore movement in sideways is a necessity. For the control of rotation of yawing direction, the angle and direction of rotation are adjusted according to the velocity and torque of rotation of a motor. Therefore this study aimed to inquire into controlling yawing direction, which is responsible for rotation of a robot. This was followed by creating a simulation of a wheelbarrow robot and equipping the robot with a yawing direction controlling device in the center of the body so as to allow sideway movements.

• The Korean Journal of Physiology
• /
• 제22권1호
• /
• pp.79-88
• /
• 1988

The effect of cervical proprioceptors on the control of eye movement and body posture was examined in unanesthetized labyrinthine intact and bilateral labyrinthectomized cats. Cervico-ocular reflex(COR) was elicited by stimulation of the cervical proprioceptors by means of sinusoidal rotation of head or body in the darkness. The following results were obtained: 1) In labyrinthine intact cats, sinusoidal rotation of the whole body elicited compensatory eye movement(vestibulo-ocular reflex: VOR); the direction of eye movement was opposite to the direction of head rotation. 2) Anticompensatory eye movement was observed by sinusoidal rotation of the body with head fixed in labyrinthine intact cats; the direction of eye movement was the same as the direction of head rotation. 3) Compensatory eye movement was observed by sinusoidal rotation of the head with body fixed or sinusoidal rotation of the body with head fixed in both acute and chronic bilateral labyrinthectomized cats. These results suggest that the cervical proprioceptors are important in the control of ocular movement and posture in the bilateral labyrintectomized cats, although they are questionable in labyrinthine intact cats.

• 대한의용생체공학회:의공학회지
• /
• 제38권2호
• /
• pp.57-61
• /
• 2017

The purpose of this study was to investigate the effect of direction (pitch and roll) on the perception of support surface rotation while standing. Thirty young healthy subjects participated in this study. Support surface was rotated at an unexpected instant in a very slow speed (0.2 deg/s). The direction of support surface rotation was randomly chosen among pitch (forward and backward) and roll (right and left) directions. The experiment was performed with eyes open and closed. Perception performance was evaluated by the perception threshold, defined as the rotation angle of the surface at the instant when a subject recognized that the support surface was moving. Results showed that the perception threshold was smaller for roll directions than pitch directions irrespective of vision and gender (p < 0.01). This indicates that the perception of support surface rotation is more sensitive in roll direction than in pitch direction. Among three sensory functions related to postural perception, the effect of vestibular and visual functions on the direction difference of the perception should be little because of the very slow surface rotation and independence on visual conditions. Therefore, the direction dependence of perception would have been affected mainly by the somatosensory function.

• 한국소음진동공학회논문집
• /
• 제21권3호
• /
• pp.258-263
• /
• 2011

The direction of the cutting tool plays a critical role in elliptical vibration cutting(EVC) where the cutting tool cuts workpiece in a trochoidal motion. In this study, EVC cutting device was developed using two parallel piezoelectric materials and it was observed that the rotation direction of the tool reverses as the EVC device undergoes resonance at which either flexural(cutting direction) or longitudinal( thrust direction) mode shapes occurs. To analytically explain reversal of the rotation direction, kinematic motion analysis of the tool was modified to incorporate amplification of the vibration amplitude and phase introduced by resonance. It successfully demonstrated, through Matlab simulation, reversal of the rotation direction of the cutting tool as the excitation frequency increases beyond resonance frequencies at which either flexural or longitudinal vibration occurs.

• 한국안광학회지
• /
• 제20권2호
• /
• pp.133-140
• /
• 2015

목적: 본 연구에서는 축 안정화 디자인이 상이한 두 토릭소프트콘택트렌즈의 회전축과 회전량이 자세와 응시방향에 따라 달라지는 지를 알아보았다. 방법: 20~30대 52안을 대상으로, Lo-Torque$^{TM}$디자인 및 ASD 디자인(accelerated stabilized design) 토릭소프트콘택트렌즈를 피팅한 후 정면을 포함한 5가지 응시방향과 누운 자세에서의 회전량을 측정하였다. 결과: 정자세에서 정면 및 수직방향 응시 시 Lo-Torque$^{TM}$ 디자인 렌즈는 코쪽, ASD 디자인 렌즈는 귀쪽으로 회전하는 비율이 높은 것으로 나타났다. 수평방향 응시시에는 두 렌즈 모두 응시방향과 반대로 축회전이 일어났다. 위쪽을 응시할 때의 회전량이 가장 작았으며 코쪽을 응시할 때의 회전량이 가장 많았다. $5^{\circ}$ 이내의 회전량을 보인 경우는 정면과 수직방향을 응시할 때의 Lo-Torque$^{TM}$ 디자인 렌즈에서 더 많았으며, 수평방향 응시 시에는 ASD 디자인 렌즈에서 더 많았다. 또한, 누운 직후에는 Lo-Torque$^{TM}$ 디자인 렌즈의 회전량이 더 적었으나 1분 후에는 ASD 디자인 렌즈의 회전량이 더 적었다. 결론: 본 연구에서는 토릭소프트콘택트렌즈 착용 후 응시방향 및 자세에 의해 유발되는 축회전이 축 안정화 디자인에 따라 달라짐을 확인하였다.

• 대한전자공학회논문지SD
• /
• 제41권12호
• /
• pp.75-81
• /
• 2004

AE-CORDIC은 CORDIC 연산의 회전 방향을 미리 계산하는 알고리즘을 이용해 CORDIC의 연산속도를 향상 시켜준다. 회전방향을 예측할 수 없는 부분은 Lookup-Table로 대체하고, 예측 가능 부분만을 CORDIC 으로 처리하였는데, 회전방향 예측은 별도의 추가 하드웨어 없이 간단하게 인코딩 할 수 있게 된다. 그리고, Unrolled CORDIC 구조에서는 Lookup-Table입력 비트 수가 크지 않으면 Lookup-Table의 하드웨어 증가보다 CORDIC 연산 단에서 감소되는 ADDER의 하드웨어가 더 크기 때문에 오히려 전체 하드웨어 크기가 줄어든다. 본 논문에서는 회전방향 예측 가능 구간 및 예측 방법을 제안하고, 최적화된 Lookup-Table의 크기를 결정하여 기존의 회전방향 예측 알고리즘인 P-CORDIC 과 비교하였다. 그리고, 입력 각이 16비트 경우를 삼성 0.18㎛ 공정을 이용해 논리 합성하여 하드웨어 크기, 성능, 정확성을 검증하였다.

• 동력기계공학회지
• /
• 제20권2호
• /
• pp.26-31
• /
• 2016

The studies on the efficient ventilator to reduce fire and save energy have been proceeded actively. The purpose of this paper is to design a ventilator used in residential wood stove. The ventilator consists of rotation and support part, and it is operated by natural wind without power. The shape of rotation part of the ventilator is like airfoil to reinforce pressure drop. We designed direction controller for the rotation part to track the direction of wind continuously. The rotation and support part have point-contact each other to minimize a friction. We verify the properties of the proposed ventilator though simulation and experiment. The results show the proposed ventilator can exhaust safely combustion gas of the stove more than other ventilator.

• 한국콘텐츠학회논문지
• /
• 제10권9호
• /
• pp.285-292
• /
• 2010

본 연구는 8방향 경사와 회전운동이 만성요통환자의 통증과 동적균형에 미치는 영향을 알아보고자 시행되었다. 20명의 만성요통환자가 실험에 참여하였다. 10명(실험군)은 물리치료기구[온열팩{Hot Pack(H/P), 경피신경자극{Transcutaneous Electric Nerve Stimulation(TENS)}, 초음파{Ultra Sound(U/S)}]를 이용한 치료를 받은 후에 8방향 경사와 회전운동을 실시하였고 나머지 10명(대조군)은 물리치료기구를 이용한 치료만 실시되었다. 치료 중재는 주 3회, 6주 동안 적용되었다. 동적균형과 통증은 Star Excursion Balance Test(SEBT)과 Visual Analog Scale(VAS)를 이용하여 측정하였다. VAS 점수는 두 그룹 모두 감소하였으나 실험군에서 보다 유의하게 감소하였다. 동적균형 능력 또한 실험군에서 보다 유의한 증가를 나타내었다. 따라서 8방향 경사와 회전운동은 만성요통환자의 통증과 동적균형에 효과가 있었다고 사료된다.

• 한국안광학회지
• /
• 제19권2호
• /
• pp.189-198
• /
• 2014

목적: 본 연구에서는 토릭소프트렌즈 피팅 시 회전방향 및 회전량과 각막난시도의 상관관계를 분석하였다. 방법: 20~30대, 전체난시 -0.75 D 이상의 직난시 114안을 대상으로 토릭소프트렌즈를 제조사의 가이드라인에 따라 피팅하고 정면주시 시와 응시방향을 달리하였을 때의 난시도와 회전방향 및 회전량과의 상관관계를 분석하였다. 또한 귀쪽과 코쪽으로 각각 $45^{\circ}$ 회전 시킨 후 회전복귀속도와 총 회전량을 각막난시도에 따라 비교 분석하였다. 결과: 각막난시도와 회전방향은 양의 상관관계를 나타내었으며, 각막난시도와 회전량 또한 양의 상관관계를 나타내었다. 한편, 응시방향에 따라 렌즈의 회전량이 상이하였으며 각막난시도와는 상관관계가 없었다. 각막난시도가 가장 높은 군에서 귀쪽과 코쪽으로 회전시킨 모든 경우에서 렌즈의 회전복귀속도가 가장 빨랐다. 결론: 토릭소프트렌즈의 최적의 축 안정화를 위하여 현재 전체난시만을 기준으로 처방되고 있는 피팅 가이드라인이 각막난시도를 고려하여 조정되어야 할 필요성이 있음을 제안한다.