• Journal of Hydrogen and New Energy
• /
• v.32 no.6
• /
• pp.477-482
• /
• 2021

Hydrogen production, hydrogen production cost, and utilization rate were calculated assuming four cases of hydrogen production system in combination of photovoltaic power generation (PV), water electrolysis system (WE), battery energy storage system (BESS), and power grid. In the case of using the PV and WE in direct connection, the smaller the capacity of the WE, the higher the capacity factor rate and the lower the hydrogen production cost. When PV and WE are directly connected, hydrogen production occurs intermittently according to time zones and seasons. In addition to the connection of PV and WE, if BESS and power grid connection are added, the capacity factor of WE can be 100%, and stable hydrogen production is possible. If BESS is additionally installed, hydrogen production cost increases due to increase in Capital Expenditures, and Operating Expenditure also increases slightly due to charging and discharging loss. Even in a hydrogen production system that connects PV and WE, linking with power grid is advantageous in terms of stable hydrogen production and improvement of capacity factor.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.4
• /
• pp.54-63
• /
• 2017

With the aim of promoting the use of metropolitan railways, the present research developed a mode choice model for evaluating its competitiveness against passenger cars. A case study was carried out with Gyeongeui and Joongang line, and the area of interest was the direct operating railway between Ilsan and Guri station where the two lines intersect. The mode choice model was a disaggregate behavior model which used Stated Preference (SP) survey data, and the plot of competition was between private passenger cars and express trains. As a result, the mode choice model was established, and this model was used to analyze characteristics of passengers' time value and elasticity. It was shown that reducing travel time is more efficient than reducing travel cost when it comes to operating express trains in metropolitan railways. Therefore, policies designed for activating the use of metropolitan railways should expand direct operating service of individual lines and run more express trains in order to minimize transfer and in-vehicle time.

• Journal of Korea Port Economic Association
• /
• v.33 no.2
• /
• pp.97-109
• /
• 2017

The Terminal Operating Company (TOC) decides to replace the harbor cranes in order to increase revenue and profit through the improvement of unloading efficiency. To achieve this goal, substantial costs and efforts are necessary. However, the conative participation of harbor stakeholders is needed, because they will certainly be passionate enough when expected effects are obvious. The purpose of this study is to analyze the effect on stakeholders on direct and indirect cost saving when the cargo handling equipment is replaced. According to the analysis, a total cost saving of 6,561.8 million won will arise including a vessel chartering fee of 3,649.6 million won, a port facility fee of 1,528.8 million won, and fuel costs of 1,383.4 million won as direct effects. As indirect cost effects, a total cost saving of 3,107.0 million won will emerge including an environmental pollution cost of 2,134.8 million won and a freight inventory cost of 972.2 million won. Consequently, the replacement of harbor cranes in the TOC has positive effects on shipping companies, shippers, and the government in terms of costs and other aspects. The results of this study can be utilized as a basis to draw a conative cooperation of stakeholders on TOC's promotion of the harbor cranes replacement.

• Journal of Biosystems Engineering
• /
• v.33 no.2
• /
• pp.83-93
• /
• 2008

In order to save labor and cost, direct seeding has been considered as an important alternative to the machine transplanting in rice cultivation. Current direct seeding machines for rice in Korea drill irregularly under various operating conditions. This study was conducted to develope a precision seeder which enables the accurate, even-spaced in row placement of rice seeds at uniform depths of 3-4 cm on dry paddy. Design, construction and performance evaluation of the precision seeder were carried out. The tractor rear-mounted type 8-rows precision seeder which performs seeding in addition to fertilizing, ditching, and rotary tilling works on dry paddy was developed. Main components of the seeder were ditcher and leveller, rotary tiller, powered roller type furrow opener, seeding device, powered roller type furrow covering and firming device, hydraulic unit, seeding speed control system, power transmission system, hitch and frame. Ditching, furrow opening, and seed covering and firming performances were good and seeding depths of 2-4 cm could be maintained. Planting accuracies and planting precisions were within 13.6%, and 31.2%, respectively, for planting space of 15 cm, and seeding velocity of 0.5 m/s. These mean variations of average planting space were within 2.1 cm, and 90% of seeds in a hill were seeded within 4.7 cm of hill length, respectively. Error ratios between setting planting space and measured average planting space were shown within 6.7%. Therefore the seeder showed good planting performance up to seeding velocity of 0.5 m/s in field tests. And field capacity of the seeder was about 0.28 ha/hour.

• Journal of Biosystems Engineering
• /
• v.30 no.5 s.112
• /
• pp.261-267
• /
• 2005

In order to save labor and cost, direct seeding has been considered as an important alternative to the machine transplanting in rice cultivation. As current seeders for direct seeding of rice seeds drill irregular amount of seeds under various operating conditions, conventional drilling should be turned to precision planting which enables accurate placement of proper amount of rice seeds at equal intervals within rows. In this study, design, construction and performance evaluation of a precision seed metering device for planting of rice seeds were carried out. As prototype, the conventional roller type seed metering device was modified for planting: increasing diameter of metering roller, setting 2 or 4 seed cells on metering roller, adding seed discharging lid and its driving cam mechanism. Through performance tests for prototype and the current seed metering device, number of seeds in a hill, planting space and its error ratio, coefficient of variation of planting space (planting accuracy), and seeding length of $90\%$ of seeds in a hill divided by planting space (planting precision) at setting planting spaces of 15, and 20cm, seeding heights of 10, and 20cm, and seeding speeds of 0.1, 0.2, and 0.5m/s were investigated. Prototype showed better seed planting performance than the current seed metering devices. When setting planting space of 15 cm and seeding height of 10cm, prototype with 2 seed cells showed that variations of planting space and seeding lengths of $90\%$ of seeds in a hill at up to seeding speed of 0.5m/s were within 0.9cm, and 3.6cm, respectively.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.6
• /
• pp.743-751
• /
• 2010

It requires an interim performance assessment for BTL business of the sewerage rehabilitation which continues from 2005 till now. Means, It is necessary to make an interim performance assessment and an analysis of an business effect of the sewerage rehabilitation BTL projects which still continues, and we presented an improvement method of the new sewerage rehabilitation project in future. This paper has conducted an analysis of the business effect for 3 local government BTL projects which are completed and under operation as of now in Jincheon-Gun, Cheongju-Si and Gangjin-Gun. As a method of business effect analysis, we conducted a business effect of the 3 places using the index set which we previously set for the business effect analysis. The index set in this research was sectionalized to an improvement effect of operating wastewater treatment plant, an benefit effect of the direct cost, an benefit effect of the indirect cost and an environment friendly effect. We, in this paper, conducted an business effect analysis for 3 sewerage rehabilitation BTL projects which are completed or under operation recently as a demonstration, however we judge that an business effect analysis shall be conducted in a stage that a significant time for operation has passed since the completion of the construction in order to induce an actual business effect of the sewerage rehabilitation BTL project.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.3
• /
• pp.271-278
• /
• 2023

This study aims to analyze the income structure, cost structure, and profit structure based on data related to the business performance of the boat seine fishery from 1990 to 2020, and to identify the direct and indirect factors affecting fishery profitability through panel regression analysis. The main analysis results are as follows. First, it was found that fish catch has a significant amount of impact on fishery profitability, which is a key factor in improving the profitability of anchovy boat seine fishery. Second, it is necessary to develop carbon-reduced fishing gear, develop fleet-reduced fishing gear, and improve the operating system in order to increase fishery profitability for the short run. Third, it is necessary to create and maintain sustainable profitability for the long run, the continuous fishing vessels buyback program, an active responses to climate change, and the follow-up investigations about marine aggregate extraction in the south sea EEZ are needed.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.1 no.1
• /
• pp.111-125
• /
• 1976

This study investigates the one-year performance of the Seoul Metropolitan Rail Transit(SMRT) operation. It intends to provide a basic understanding for railway operation in Seoul Metropolitan Area and thereby for making rational transport policy. The paper is conceptually comprised of four sections; analysis of passenger travel characteristics; SMRT costing and traffic cost function: its operating characteristics in terms of finance and utilization; primary social benefits of SMRT and suggestions. In the first year of operation (1974), the average daily traffic was about 335,000, After the drastic increases of fare in both Subway and KNR rail-lines, the travel volume has been cut by almost 10 percent, though most pronounced on intra-Subway line. The spatial distribution of passengers indicates that travelers use the SMRT line mainly for uninterrupted direct travel toward the CBD. In the prospective costing, the opereting expenses are divided into three groups; those which vary directly with volume; those partially variable with volume; and those entirely unrelated to volume change, With this information, cost function was derived for varying schedules of operation. Primary social benefits of the SMRT are assessed, though preliminary. Account should be taken of the nature of common costs of the SMRT in fare-rate making, especially when much of the operating expenses are accounted for by the fixed costs such that the revenue may not readily turn into break-even. The accounting results of the one-year operation coincide reasonably well with the prospective costing estimates. According to the findings of this annd another travelers' behavior studies, managerial effort would bring more revenue gain to the SMRT than fare increase does, not to speak of greater social benefits by so doing.

• Plant Journal
• /
• v.5 no.4
• /
• pp.73-79
• /
• 2009

Increase of consumption in limited coal reserves leads prices surging. As a result, iron works which produce products with coal are in difficulties. Accordingly, it is required a lot of research of using non-caking coal that is relatively low cost and has abundant reserves. Direct drying and indirect drying are two major methods of drying the coal. Recently, to minimize the needed calories and to save energy, using fluidbed or fluidizing method is a recent main trend of minimizing the size of the facility and maximizing energy efficiency. However there is also disadvantage such as increasing facility investment because of installing additional facilities in the latter part. In this study, we will have theoretical researches on the indirect drying method with heat exchange system which have been traditionally used. As a result it is expected to increase the efficiency of the facility operation.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.293-298
• /
• 1997

The H$_{\infty}$robust controller fur the reactor power control system is designed by use of the mixed weight sensitivity. The system is configured into the typical two-port model with which the weight functions are augmented. Since the solution depends on the weighting functions and the problem is of non-convex, the genetic algorithm is used to determine the weighting functions. The cost function applied in the genetic algorithm permits the direct control of the power tracking performances. In addition, the actual operating constraints such as rod velocity and acceleration can be treated as design parameters. Compared with the conventional approach, the controller designed by the genetic algorithm results in the better performances with the realistic constraints. Also, it is found that the genetic algorithm could be used as an effective tool in the robust design. robust design.