• 대한기계학회논문집A
• /
• 제33권12호
• /
• pp.1375-1382
• /
• 2009

The objective of this paper is to apply the load ratio method to the measurement of the crack length of the real scale pipe specimen. The load ratio method was modified and finite element analyses were performed to derive the relationship between the normalized compliance and the normalized crack length for the pipe specimen. In order to measure the crack length, the direct current potential drop method and the modified load ratio method were applied to the pipe test. The applicability of the modified load ratio method was confirmed by comparing the calculated crack length with the measured crack length from the pipe experiment.

• 한국통신학회논문지
• /
• 제40권11호
• /
• pp.2218-2229
• /
• 2015

최근 Wi-Fi Alliance에서는 기존의 Wi-Fi 망에서 이동성을 갖는 무선 단말들이 중개기나 라우터가 없이 언제 어디서나 직접 통신이 가능한 Wi-Fi direct라는 새로운 표준 기술을 발표하였다. Wi-Fi direct에서 기기는 기존의 Wi-Fi 망에서 AP역할을 하는 Group Owner (GO)와 GO와 연결되어 있는 client로 구분되어 존재한다. 일반적으로 client들은 휴대성을 위해 제한된 배터리 용량을 갖기 때문에, 기기들의 에너지 소모가 효율적으로 이루어져야 한다. 이에 따라 GO의 에너지소모를 막기 위하여 두 가지 전력관리기법 Opportunistic기법과 Notice Of Absence (NOA)기법이 사용되었으나 이 두 기법은 트래픽 패턴 등의 특성을 고려하지 않아 에너지 효율성이 높지 않다. 이에 본 논문에서는 멀티미디어 트래픽의 특성을 파악하여 Wi-Fi direct power saving의 에너지 효율성을 높이기 위한 알고리즘을 제시한다. 제안하는 알고리즘은 NOA 기법에서 동적으로 변하는 비디오 프레임의 분포를 활용하여, 다음 비콘 구간에 도착할 비디오 프레임의 예상 크기에 따라서 GO의 awake 구간을 동적으로 조절함으로써, 불필요한 에너지 소모를 감소한다. 또한 비디오 프레임의 상호 의존성을 고려하여 비디오 프레임의 종류별로 우선 순위를 부여하고, 이를 바탕으로 우선순위가 높은 비디오 프레임이 높은 확률로 전송될 수 있도록 awake 구간을 결정함으로써 전송 효율을 높인다. 모의실험 결과 제안한 알고리즘이 NOA 기법에 비해 전송 지연이 더 짧고 에너지 효율이 더 높다는 것을 확인하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.282-296
• /
• 2014

In this paper, an iterative boundary element method (IBEM) was proposed to solve for a wing-in-ground (WIG) effect. IBEM is a fast and accurate method used in many different fields of engineering and in this work; it is applied to a fluid flow problem assessing a wing in ground proximity. The theory and the developed code are validated first with other methods and the obtained results with the proposed method are found to be encouraging. Then, time consumptions of the direct and iterative methods were contrasted to evaluate the efficiency of IBEM. It is found out that IBEM dominates direct BEM in terms of time consumption in all trials. The iterative method seems very useful for quick assessment of a wing in ground proximity condition. After all, a NACA6409 wing section in ground vicinity is solved with IBEM to evaluate the WIG effect.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.398-401
• /
• 2001

There are two methods to calculate design sensitivity such as direct differentiation method and adjoint method. A sort of direct differentiation method for design sensitivity analysis costs too much when number of design variables is much larger than the number of response functions whose design sensitivity analyses are required. Therefore, an adjoint method is suggested for the case that the dimension of design variables is lager than the number of response function. An adjoint method is required to compute adjoint variables from the simultaneous linear system equation, the so-called adjoint equation, requiring only the eigenvalue and its associated eigenvectors for mode being differentiated. This method has been extended to the repeated eigenvalue problem. In this paper, we propose an adjoint method for deign sensitivity analysis of damped vibratory systems with distinct eigenvalues.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.121-128
• /
• 2000

The scope of this paper is focused to the systems which have the time period and they should be necessarily studied in the sense of stability and design method of controller to stabilize the orignal unstable systems. In general, the time periodic systems or the systems having same motions during certain time interval are easily found in rotating motion device, i.e., satellite or helicopter and widely used in factory automation systems. The characteristics of the selected dynamic systems are analyzed with the new stability concept and stabilization control method based on Lyapunov direct method. The new method from Lyapunov stability criteria which satisfies the energy convergence is studied with linear algebraic method. And the numerical procedures are developed with computational programming method to apply to the practical linear periodic systems. The results from this paper demonstrate the usefulness in analysis of the asymptotic stability and stabilization of the unstable linear periodic system by using the developed simulation procedures.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.384-387
• /
• 2003

A new Direct Nonlinear Strut-Tie Model design method performing iterative calculations using secant stiffness was developed. Since basically the proposed design method uses elastic analysis, it has the advantages of convenience and stability in numerical analysis. At the same time, the proposed design method can accurately estimate the strength and ductility demands on the members because it analyzes the inelastic behavior of structure using iterative calculation. In the present study, the procedure of the proposed design method was established, and a computer program incorporating the proposed method was developed. The proposed design method, as an integrated method of analysis and design, can address the earthquake design strategy devised by the engineer, such as ductility limit on each member. Through iterative calculations on the structure preliminary designed with member sizes, the strength and ductility demands of each member can be estimated so that they satisfy the given design strategy, and as the result economical and safe design is achieved.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 봄 학술발표회논문집
• /
• pp.37-44
• /
• 1993

There are a lot of linear dynamic analysis methods for complex structures. Each method has advantages and shortcomings. Method of dynamic analysis for complex structure is selected considering characteristics of dynamic loading, computer facility available number of degree of freedem and accuracy of results. It is a main point of view to get economical results rather then accurate ones for analysis of general complex structures, Mode superposition method and direct integration method are generally used. However, the characteristics of load is not considered in mode superpositon method, the personal computer cannot be used in direct integration methods. To over-come these shortcomings, the component mode method incorporating Ritz algorithm updated is proposed to solve economically dynamic behavior of the structures. The purpose of study is a formulation of algorithm, and computer programing suitable for dynamic analysis of the complex structure in personal computer environment.

• Fibers and Polymers
• /
• 제6권3호
• /
• pp.235-243
• /
• 2005

A series of new metallized direct dyes based on benzidine congeners, 2,2'-dimethyl-5,5'-dipropoxybenzidine and 5,5'-dipropoxybenzidine, were evaluated for mutagenicity in Salmonella typhimurium strains TA98 and TA 100. All of the dyes examined were judged to be non-mutagenic with and without metabolic activation while toxicity was seen in some dyes at high doses. The study also suggested that the standard Salmonella mutagenicity plate-incorporated assay was an excellent method for evaluation of dyes for mutagenicity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.377-380
• /
• 1992

This paper proposes a novel direct adaptive pole placement control algorithm which can be applied to continuous time nonminimum phase systems. The algorithm is based on Lyapunov's direct method. By introducing an auxiliary signal, a minimal error model is constructed in state space. Using the error model an estimation law is obtained via Lyapunov's second stability theorem. The global stability of the overall system is established.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.194-199
• /
• 1989

In this paper, using the direct drive arm for plant, the controller is developed to track the desired trajectory in high speed and precision. For the purpose of this, through extending self-tuning pole-placement algorithm, we developed self-tuning pole-shift algorithm which is fast in response and good tracking for the reference tracking change. Developed controller is applied a three-link direct drive arm with the varing payload to track the desired tracking. And, through the computer simulation, the performance of developed controller is compared with the performance of the computed torque method and the self-tuning pole placement algorith.