• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2003.04a
• /
• pp.164-170
• /
• 2003

In this paper, we studied on the firing characteristics and electrical fire analysis of power cord deteriorated by thermal stress. The cross section of PVC insulating cord deteriorated by indirect flame decreased through heat convection. PVC insulating cord deteriorated by direct flame was bumpy shape. The exothermic peak of normal cord was shown at ($526.7^{\circ}C$), but the peaks or on(heat treatment temperature) ($150^{\circ}C$) cord was shown at ($299.6^{\circ}C$) and [$502.2^{\circ}C$]. The exothermic peaks according to high temperature were similar to those of amorphous carbon. In the FT-IR analysis, the absorption peak of normal cord indicated double bond of oxygen and carbon in benzene ring at 1720.0$cm^{1}$. As the HTT was high, the height of characteristic peak decreased and the peak of carbonyl group was shown at about 1625.7$cm^{-1}$. The characteristic peak of single bond(O-H) was shown at about 3479.2$cm^{-1}$. In case of the internal part of wire covering deteriorated by over current, the characteristic peak were shown at about 3417.3$cm^{-1}$ and 1600.2$cm^{-1}$. The above results show that we can distinguish the differences according to the fire pattern through the internalㆍexternal analysis of wire covering deteriorated by heat.

• Korean Journal of Weed Science
• /
• v.31 no.1
• /
• pp.1-7
• /
• 2011

It was a method of weed removing, called as whagyeongsoonoobeob. Namely, the Hwanoobeob was the weeding method came from "Jeminyosool" in old China, and had been descended to "Wibinmyeongnonggi", "Nonggajibseong" and "Gwanongsocho" in the $16\sim18^{th}$ century of our country. The method was applied to rice paddy after applying direct-seeding, burning by unit before watering to remove weeds and to save rice plants. It would be applied with a method of using non-selective herbicide such as paraquat and oxyfluorfen, or radiation treatment, as a simple and safe weed removing method.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.742-745
• /
• 2001

Plastics are one of difficult materials for recycling due to their characteristics in use. Recycling ratio of waste plastics was around 40% in last year in Japan, which includes energy recovery. Feed stock recycling and mechanical recycling are not easy because of additives in commercial plastics. Then, pyrolysis treatments have been done to recovery energy. Although plastics are easy to fire, complete combustion of them is not easy if anti-firing agents are added especially. Therefore, researches on pyrolysis or combustion behaviors of plastics containing additives are important from a view point recycling of plastics. Direct observation of popular plastics like polystyrene (PS), polycarbonate (PC), polyphenyle ether (PPE) and polyvinyl chloride (PVC) to investigate their pyrolysis behaviors in the present study. In case of PS, melting and gas evolution started at 9$0^{\circ}C$ and 39$0^{\circ}C$ respectively. And combustion finished at 445$^{\circ}C$. On the other hand, more than $600^{\circ}C$ and sufficient oxygen are required for complete combustion of PC and PPE.

• Animal cells and systems
• /
• v.2 no.1
• /
• pp.65-69
• /
• 1998

The hippocampus and prefrontal cortex are regarded as the highest-order association cortices. The hippocampus has been proposed to store "cognitive maps" of external environments, and the prefrontal cortex is known to be involved in the planning of behavior, among other functions. Considering the prominent functional roles played by these structures, it is not surprising to find direct monosynaptic projections from the hippocampus to the prefrontal cortex. Rhythmic stimulation of this projection patterned after the hippocampal EEG theta rhythm induced stable long-term potentiation of field potentials in the prefrontal cortex. Comparison of behavioral correlates of hippocampal and prefrontal cortical neurons during an a-arm radial maze, working memory task shows a striking contrast. Hippocampal neurons exhibit clear place-specific firing patterns, whereas prefrontal cortical neurons do not show spatial selectivity, but are correlated to different stages of the behavioral task. These data lead to the hypothesis that the role of hippocampal projection to the prefrontal cortex is not to impose spatial representations upon prefrontal activity, but to provide a mechanism for learning the spatial context in which particular behaviors are appropriate.propriate.

• Journal of Hydrogen and New Energy
• /
• v.4 no.1
• /
• pp.1-9
• /
• 1993

To find performance and knock limit for compression ratio in hydrogen fueled engine, the variable compression ratio hydrogen fueled engine which was able to vary compression ratio during firing was manufactured and estimated. The characteristics of the variable compression ratio hydrogen fueled engine were as follows : 1) compression ratio variation by moving of cylinder head, 2) OHC which can be realized low S/V ratio, short flame propagation distance and unvariable configuration of combustion chamber for compression ratio variation, 3) direct injection of hydrogen gas to restrict back fire.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.81-86
• /
• 1998

The light aggregates were fabricated by sintering green bodies made form the fly ash-clay alip. The content of fly ashes in the slip could be increased up to 70wt.% due to controlled rheological behavior of the slip, and the green body of uniform microstructure could be obtained by DCC(Direct Coagulation Casting)method. The apparent density, microstructure and compressive strength for sintered bodies fired at 1100∼1200$^{\circ}C$ were evaluated. The properties of light aggregates fabricated depend on slip density, particle behavior in the slip and sintering conditions. The sintered body prepared by firing a green body made from slip of density 1.60 at 1150$^{\circ}C$/2hr satisfied conditions of a light aggregate as apparent density of 1.49${\pm}$0.02 and compressive strength of 584${\pm}$62kg/$\textrm{cm}^2$.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.103-107
• /
• 2016

In general, the voltage stability of induction generator is lower than synchronous generator. Induction generator has a number of advantages over the synchronous generator on the side of price and maintenance. So Induction generator has been applied to the small hydroelectric power of low output. Induction generator usually generates a high current during grid connection. The high current that occurs during grid connection can cause a voltage drop in the system. In order to increase the supply of the induction generator, it is necessary to propose a method of reducing high current. This paper proposes some method of the soft start to reduce voltage drop caused by the large starting current. soft-start method has high voltage drop effect than direct start method, control of firing angle can be increased the voltage drop effect.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.593-593
• /
• 2001

Esthetic restoration techniques can be categorized into "Direct techniques" consist only of intraoral procedures and "Indirect techniques" include intraoral as well as extraoral laboratory steps. Those made extraorally exhibit generally enhanced esthetic potential and anatomy and better hardness and wear resistance, indirect esthetic restorations numerously applied in contemporary dentistry. Indirect restorative materials can be divided into two categories; composite resin-based materials and ceramic-based materials. These materials shows various were resistance, modulus of elasticity, repair postenital, chemical stability, and different laboratory procedures. In this session, benefit of indirect techinques, case selection of this kind of restorations, and material characteristics and fabrication produre of those materials will ber reviewed; Targis, Sculpture, Belleglass, and Post-curing of restorative composite resins in resin-based materials; Dicor, Empress, Cerec, Celay, and conventional firing porcelain in ceramic based materials.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.227-229
• /
• 2012

Diversification of combustion fuel is the demands of the times and biomass is the most attractive option since it can contribute to the prevention of global warming at the same time. Due to the national renewable obligation, generally called Renewable Portfolio Standard (RPS), many power companies are considering direct combustion of biomass or co-firing with coal. In order to use biomass as a fuel, informations of its combustion characteristics and ash related problems should be investigated. In this study, combustion performance of biomass was assessed in a bubbling fluidized bed combustor, and ash characteristics of various biomass fuels were studied with standard test method.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.47
• /
• pp.193-209
• /
• 1998

The objective of this paper is to present a methodology for design of the FMS by using a new modeling tool which is called SE&TPN(Safe Extended & Timed Petri Net). A FMS, which consists of various machine groups, may produce machine parts in different physical dimensions and lot size. The approach involves the SE&TPN modeling by Petri-nets. The proposed algorithm can handle determining of firing count vector by incidence matrix and adjustment of conflict using the marking of SE&TPN. The SE&TPN is defined as nets that can have at most one token in one place and can have elements such as permissive arcs and inhibitor arcs in addition to elements. The SE&TPN with permissive arcs and inhibitor arcs are intuitively direct approach to increase the modeling power of the SE&TPN. Finally, this paper is to develop a modulation to optimize the system problems of FMS using SE&TPN which describes exactly features of Petri Nets.