• Restorative Dentistry and Endodontics
• /
• 제37권4호
• /
• pp.240-244
• /
• 2012

Crown reattachment is the most conservative treatment which can be used to restore fractured tooth, presumably with sufficient strength, while maintaining original contour, incisal translucency, and reducing chair time and cost. However, in case of crown fracture with pin-point pulp exposure, we should cautiously minimize the irritation to the pulp and consider pre-treatment pulpal status, choice of pulp capping materials, choice of bonding system and treatment sequence during crown reattachment procedures. This case reports the considerations while crown reattachment with direct pulp capping using calcium hydroxide (Dycal, Dentsply Caulk).

• Journal of Medicine and Life Science
• /
• 제20권1호
• /
• pp.43-47
• /
• 2023

Streptococcus suis (S. suis) is an emerging zoonotic pathogen that causes bacterial meningitis in humans. S. suis is an encapsulated gram-positive facultative anaerobic bacterium and is an important pathogen in pigs. This infectious disease usually manifests in humans as meningitis, endocarditis, septicemia, and arthritis. Most cases originate in Southeast Asia, and human S. suis infections are often reported in countries with a high density of pigs. Meningitis is a common clinical manifestation of S. suis infection. Moreover, hearing loss is a common complication that can be bilateral, profound, and/or permanent. This report presents two cases of bacterial meningitis and hearing loss caused by S. suis in patients without a history of direct exposure to pigs in an intensive pork industry region.

• 대한후두음성언어의학회지
• /
• 제27권2호
• /
• pp.138-140
• /
• 2016

Vocal cord polyps are generally removed using a direct laryngoscope and surgical microscope. In some case of laryngeal microsurgery, laryngeal exposure with surgical microscope is difficult because of severalfactors. We experienced a case of vocal polyp with difficult laryngeal exposure in a 56 year old male patient. The vocal cord polyp was removed successfully through endoscopic approach.

• 한국산업보건학회지
• /
• 제30권2호
• /
• pp.174-184
• /
• 2020

Objectives: The purpose of this study was to improve the working environment by identifying the work satisfaction of the cleaning workers of the aircraft and measuring and assessing the harmful factors of the cleaning process. Methods: We asked 23 cleaning companies for questionnaires and got 100 answers from 5 companies. The A-E Airline health manager has been contacted to establish a site survey schedule. The in-flight and lounge were measured using direct reading equipment. The harmful factor to be measured are noise, dust, temperature, volatile organic compound, total airborne bacteria, and total airborne bacteria. Results: Uncomfortable positions when replacing blanket, cleaning the table, and cleaning the floor have been identified as factor that reduce work satisfaction. Noise when replacing newspapers and cleaning toilets has been identified as a factor that lowers work satisfaction. Temperature and humidity were found to reduce work satisfaction during in-flight disinfection. Measurements of aircraft cabin and lounge with direct read equipment have shown that none of the items exceed the exposure criteria. Conclusions: As a result of measuring direct-reading equipment, no items exceeded the exposure criteria for each harmful factor. A clear survey of the working environment is required based on the results, and additional research is needed using personal sample measurement.

• 한국초지조사료학회지
• /
• 제17권2호
• /
• pp.187-198
• /
• 1997

This experiment was conducted to evaluate effects of wilting and additives on fermetation characteristics, quality and aerobic stability of silage of rye(Seca1e cereale L.) harvested at the early heading stage. Harvested rye was wilted or mixed with beet pulp and then treated with formic acid or lactic acid bacteria(LAB) inoculant. Treatments were consisted of direct cut(DC), wilted(WT), beet pulp added(BP), direct cut and formate applied(DF), wilted and formate applied(WF), beet pulp and formate applied(BF), direct cut and LAB inoculated(DL), beet pulp added and LAB inoculated(BL), and wilted and LAB inoculated(WL) silages. Afler 70 days of ensiling period, the silages were opened and exposed to air for 7 days, and the silages of opening day(0 day) were compared with the silages exposed to air for 7 days(7 day). 1. LAB inoculated rye silages(DL, WL, BL) lowered pH values effectively eom the third day of ensiling and showed most stable pattern of pH changes during the initial fermentation process. Direct cut and formate applied(DF), beet pulp and formate applied(BF) and beet pulp added(BP) silages were also effective in lowering pH from the seventh day thai direct cut treatment(DC). 2. pH was low below 3.7 in all treatments of 0 day. After 7-day period of aerobic exposure, DL and WL showed considerable increases in pH from 3.5 and 3.4 to 8.3 and 6.4, respectively. 3. Direct cut rye silages(DF, DC, DL) and beet pulp and formate treatment(BF) produced effluent of 121.2, 85.9, 80.3 and 34.2 mlkg, respectively and these were greater than others(P<0.01). Beet pulp retained 1.61 I/kg of effluent at the application rate of 50 kg/t in comparing BP with DC, and formate application increased the amount of effluent in comparing DF and BF with DC and BP, respectively(P<0.01). 4. Beet pulp and LAB treatment(B1) was highest in content of lactate as 3.1% and formate treated silages(DF, WF, BF) showed lower content of lactate and total acid than others. LAB inoculated(D1, WL, BL) and wilted (WT) silages were graded to be good quality as a second group by the Flieg's score. Formate applied silages (DF, WF, BF) were graded as a foum group lower than DC by one. 5. Residual content of WSC of rye silage was higher in BP, BF, DL and BL than direct cut treatment(M3) (P< 0.01). Formate application had a tendency to increase the content of residual content of WSC. 6. For the ratio of NH3-N to Total N, wilted and LAB inoculated(W1) and direct cut and LAB inoculated(D1) silages were lowest on 0 day as 8.9 and 9.3% respectively. But after 7-day period of aerobic exposure, WL and DL showed largest increase of the ratio of $NH_3-N$ to Total N from 0 day(P<0.01). 7. On 0 day wilted(WT), beet pulp and formate treatment(BF), and beet pulp and LAB treatment(B1) were lower than direct cut treatment(DC) for NDF and ADF concentrations consistently. Formate applied silages (DF, WF, BF) made little change in ADF and NDF concentrations during 7 day period of aerobic exposure. DL and WL showed a large increase in ADF and NDF concentrations under aerobic condition(P<0.01). 8. IVDMD values of wilted(WT), beet pulp added(BP), wilted and LAB inoculated(W1) and beet pulp added and LAB inoculated(B1) silages were higher than direct-cut treatmentPC) as 84.7, 84.7, 84.4 and 83.0%, respectively on 0 day. But during 7-day period of aerobic exposure, a great decreae in IVDMD of WL was showed(P<0.01). The experimental results indicate that wilted silage(WT) could be recommended as the most effective treatment for reducing efluent and increasing quality and feed value of rye silage without deteriorating aerobic stability more than direct cut treatment(DC). Additionally, under unfavorable weather condition beet pulp added and LAB inoculated treatment(T3L) might be the possible alternative for successful ensiling of forage rye.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.209-211
• /
• 2002

A number of polycyclic aromatic hydrocarbons (PAHs), such as benzo［a］pyrene, are carcinogenic and thought to contribute to the overall burden of human cancer (1). PAHs are ubiquitous in the environment and humans are exposed to them via multi-pathways, e.g. air or soil of urban areas, exposure to direct or indirect tobacco smoke, and ingestion of food or water polluted by combustion effluents (2-3). (omitted)

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2001년도 추계학술대회
• /
• pp.203-210
• /
• 2001

In the real environment, it is very limited for the trainees to participate the effective training using actual training equipments by themselves and also to simulate several hazard situations for safety because of the direct exposure to the hazards of the actual system. But the virtual environment(VE) can help the trainees to get the effective training participating by themselves and to simulate all kind of possible situation without the exposure to the hazards of the actual system. In this paper, the nor· developed VE system for safety training is introduced. The system is more effective and economic one than the other system developed in Japan.

• Toxicological Research
• /
• 제5권2호
• /
• pp.97-104
• /
• 1989

A new exposure system was developed to generate p-dinitrobenzene (p-DNB) containing atmosphere. A glass column was filled with small glass beads coated with the chemical. The p-DNB containing medium was heated to a temperature beyond the boiling point of p-DNB. A stream of air flow was forced to pass through the column and let it mixed with fresh air before introducing into an inhalation chamber. The concentration of p-DNB in the chamber air was measured by direct assaying the air directly and by sampling the chemical using a microfilter installed in the chamber.

• 대한안전경영과학회지
• /
• 제3권4호
• /
• pp.35-44
• /
• 2001

In the real environment, it is very limited for the trainees to participate the effective training using actual training equipments by themselves and also to simulate several hazard situations for safety because of the direct exposure to the hazards of the actual system. But the virtual environment(VE) can help the trainees to get the effective training participating by themselves and to simulate all kind of possible situation without the exposure to the hazards of the actual system. In this paper, the new developed VE system for safety training is introduced. The system is more effective and economic one than the other system developed in Japan.

• 대한안전경영과학회지
• /
• 제2권2호
• /
• pp.21-28
• /
• 2000

In the real environment, it is not easy to get the effective training or to simulate several hazard situations for safety because of the direct exposure to the hazards of the actual system. But the virtual environment(VE) can help the users to get the effective training or to simulate all kind of possible situations without the exposure to the harzards of the actual system. Therefore, the number of virtual reality(VR) application for safety will be increased dramatically in the future. This paper proposes a category of VR applications and also the steps to develope the VE for emergency management.