• Structural Engineering and Mechanics
• /
• v.59 no.5
• /
• pp.803-820
• /
• 2016

In this study a direct displacement-based design (DDBD) procedure for a continuous deck bridge isolated with triple friction pendulum bearings (TFPB) has been proposed and the seismic demands of the bridge such as isolator's displacement and drift of piers obtained from this procedure evaluated under two-directional near-field ground motions. The structural model used here are continuous, three-span, castin-place concrete box girder bridge with a 30-degree skew which are isolated with 9 different TFPBs. By comparing the results of DDBD method with those of nonlinear time history analysis (NTHA), it can be concluded that the proposed procedure is able to predict seismic demands of similar isolated bridges with acceptable accuracy. Results of NTHA shows that dispersion of peak resultant responses for a group of ground motions increases by increasing their average value of responses. It needs to be noted that the demands parameters calculated by the DDBD procedure are almost overestimated for stiffer soil condition, but there is some underestimation in results of this method for softer soil condition.

• Journal of the Korean School Mathematics Society
• /
• v.11 no.3
• /
• pp.377-397
• /
• 2008

In today's secondary school mathematics curriculum, assessment is to be focused on evaluating the student's mathematical thinking rather than finding the correct solution to the problem. A descriptive evaluation method is therefore introduced to the school districts and suggested as an alternative assessment method in K-12 school mathematics. Descriptive evaluation method is widely available for use in schools, but there are barriers to using it since the teachers are forced to use the method by the school districts. In this research, we surveyed 120 secondary school mathematics teachers in Seoul and the surrounding metropolitan area to understand the status and the perception about using descriptive evaluation. The goal of the study was to find and understand the direct implications of using the new assessment method in secondary mathematics classes. The study showed that most of the mathematics teachers used the descriptive assessment method during their regular exam periods which is given twice per semester. Most of the open-ended problems used for descriptive evaluation were medium or high level math questions which were graded by the teachers at least 3 times to ensure objective evaluation. The teachers stated that objectivity in grading, administrative situation, and development of descriptive problems were the difficult barriers in descriptive evaluation. The teachers in the survey also commented that teachers' administrative responsibility should be reduced and that school environment in general should be improved for the new assessment method to become successful. Finally, the study showed that development of more descriptive problems with specific grading guidelines need to be developed for each grade level.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.3
• /
• pp.184-190
• /
• 2015

NVH engineering has become a hot issue due to radical technology changes and development in automotive industry since customers' expectations and needs for their vehicle is taken to a higher level. However, the source identification and quantification of the road noise within a vehicle is still not at the level where it needs to be to meet their expectations due to its' complex transfer path and difficulties in path optimization. The primary focus of this research is on direct force obtaining method at suspension hard points using suspension test rig. Directly obtained forces at suspension to body mounting points are critical and crucial for determining the effects of design changes of the suspension has on road noise performance. Direct force obtaining method has its limitation in sensor installation within an actual vehicle therefore, many has been indirectly calculating forces using full matrix inversion method or dynamic stiffness method. In this study, to circumvent this limitation, a suspension rig is used. Then, the suspension rig is verified through a comparative analysis of its dynamic behavior between the actual vehicle by cleat test on chassis dynamometer.

• Parasites, Hosts and Diseases
• /
• v.23 no.2
• /
• pp.285-292
• /
• 1985

The present study has been designed as a basic study on laboratory diagnosis of giardiasis and to demonstrate a more effective method for the detection of Giardia lamblia cyst with the inherent advantages of minimizing both the number of stool examinations required and the interval of stool collections for estimating the real state of prevalence in the shortest time possible. There were 3 subject groups of 75 children each currently residing in an orphanage in Gunsan city, Jeonbuk province from which stool specimens were collected every day, every other day, and every 3 days. The procedure is as follows: 1) resuspend the InKed sample after fixation with SAF solution 2) centrifuge the sediment for 1 min. at 2, 000 rpm after straining through gauze into a tube 3) divide the sediment into 3 parts and use them for direct fecal smear, formalin-ether concentration (MGL) and zinc sulfate ($ZnSO_4$) floatation techniques. The results are summarized as follows: 1. Overall infection rate after 10 trials showed a 60% positive indication. The positive rate among children under 4 years old was significantly higher than the rate in children over 4 years old. No significant difference in rate by sex was observed. 2. The results of eBaminations by direct fecal smear and MGL techniques appeared more accurate than that obtained by $ZnSO_4$ ftoatation method as indicated by a higher positive rate. Of all three methods concerned, combinations of two demonstrated a higher positive rate than that shown by any one alone. 3. In three consecutive examinations under varying conditions such as different days, the cyst detection rate by MGL technique indicated 83%. In 5 examinations under the same varying conditions, the indicated rate was 94%. 4. The interval of stool collection proved to be insignificant for the cyst detection rate. In conclusion, both MGL method and modified fecal direct smear can provide a good cyst detection rate of G. lamblia provided that more than 3 consecutive examinations of stool under varying conditions are carried out.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.47-54
• /
• 2013

This paper introduces a W-band millimeter-wave power standard transfer system using the direct comparison method. The transfer system was developed to evaluate the effective efficiency and calibration factor of a W-band waveguide power sensor. The evaluation method and the measured results of the directional coupler that characterizes the calibration system are studied. The uncertainties of the standard transfer system are investigated, and the major uncertainty contributors are discussed as well. The performance of the realized W-band power standard transfer system was verified by comparing results with reference values.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.11
• /
• pp.65-70
• /
• 2011

It is well known all much information for evaluation on possibility of liquefaction and lateral flow for sand over the world. Recently, it is started to be known that liquefaction happens on non-plastic silt, too. But cyclic and post-cyclic characteristics for non-plastic silt is a few familiar to the world. Specially, it is not aware of the estimating method for lateral flow on non-plastic silt. The main purpose in this paper is to propose the evaluation for liquefaction and lateral flow on non-plastic silt. The method used in this research is that possibility for liquefaction on non-plastic silt was evaluated with cyclic direct simple shear test, and then residental strength was estimated with static shear test. Through the test results liquefaction on non-plastic silt is well not happened but strength decreases rapidly with increasing shear stress. With the proposed method it can be evaluated possibility of liquefaction and propose lateral flow.

• Journal of the Korean Society of School Health
• /
• v.1 no.1
• /
• pp.148-159
• /
• 1988

For the evaluation of physical assessment by school nurses, this study was designed in two steps physical assessment. The first step is the primary health screening by school health nurses. The second step is the Physicians' physical examination of ill health students selected by school nurses. This study was conducted on a total of 3,525 students of three primary schools located in urban, township, and rural area during the period from May to June, 1987, all data were collected through direct observation & survey method. The main findings are as follows 1. The number of ill health students selected by two step method was more than that of one step method by the physician. 2. The types of ill health students selected by two step method had more diversity than that of one step method by the physician. 3. Budgets and time consumption for two step method were more reductive than that of one step method by the physician.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.96-101
• /
• 1998

J-R curve tests were performed on 1T compact specimens of SA516 Gr. 70 carbon steels under reverse cyclic loading. A Direct-Current Potential Drop (DCPD) method, one of the nondestructive techniques to detect flaw of structure, is being increasingly used for monitoring crack initiation and stable crack growth in typical fracture mechanics specimens for J-R testing. In many aspects this method is simpler than the unloading compliance method. The objective of this paper is to evaluate the J-R Curve according to the crack length measurement techniques under reverse cyclic loading. In order to prove the reliability and repeatability of the DCPD method, the crack length measured by using DCPD method was compared to one determined from unloading compliance. Consequently, this DCPD method correlated well with J-R curves and crack extension measurements determined from unloading compliance method.

• Journal of the Society of Disaster Information
• /
• v.3 no.1
• /
• pp.87-101
• /
• 2007

The definition and concept of disasters and their preparedness have been changing according to the modern situation. The basic change is that the concept of absolute standard and prevention of hardware damage in the past have been changing to the concept of relative standard and mitigation of direct damage to human. For achieving the purpose, advanced countries developed and used their own analysis method of hazard and vulnerability for disaster ; ASHE hazard and vulnerability evaluation method, hazard matrix method by CDC, FEMA model method and SMUG hazard priority method. Because each analysis method cannot evaluate the hazard and vulnerability for specific disaster, the advantages and disadvantages should be applied for specific situation of disaster in Korea and new analysis method should be extracted in the future.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.6
• /
• pp.403-412
• /
• 2016

As transaction and investment using technology are vitalized, the need for objective standards for the technology is increasing. Current technology value evaluation system is limited lacking reliability and objectivity. Besides the traditional evaluation methodology which are market approach, income approach and cost approach other diverse evaluation methodology such as real option method and royalty calculation method are being studied; however currently there are no dominant evaluation methodology in the market. Same value evaluation system cannot be applied between similar technologies because value of technology is relatively decided based on the target. Approaching through collective intelligence and crowd sourcing, in meaning of majority participant's decision can make objective and better result than handful of experts, suggest alternative to problems of such matter above. By grafting the four types of crowd sourcing model which are Wisdom, Voting, Funding and Creation, this paper will discuss the ways to enhance the objectivity of technology evaluation through direct evaluation utilizing expert group and the public's indirect evaluation.