• 제목/요약/키워드: Direct cutting test

검색결과 19건 처리시간 0.023초

복합공작기계의 이송계 운동정밀도 측정의 연구 (A Study on the Measurement of Motion Accuracy for Feed Drive System of Multi-task Machine Tool)

  • 고해주;정윤교
    • 한국기계가공학회지
    • /
    • 제6권3호
    • /
    • pp.112-118
    • /
    • 2007
  • Recently, the machine tools called multi-task machines, which mounted rotary axes on the table or spindle are used increasingly. Accordingly, multi-task machine tool takes a growing interest on the motion accuracy of feed drive system. In this study, measurement and diagnosis of motion errors ware attempted from circular pattern obtained by using DBB (Double ball bar) device. Those were obtained at both clockwise and counter clockwise motions in mutually perpendicularly intersecting three planes. The reliability of error measurement system for multi-task machine tool was verified by the direct test cutting.

  • PDF

복합공작기계의 이송계 운동정밀도 측정의 연구 (A Study on the Measurement of Motion Accuracy for Feed Drive System of Multi-task Machine Tool)

  • 고해주;정윤교
    • 한국기계가공학회지
    • /
    • 제6권3호
    • /
    • pp.31-37
    • /
    • 2007
  • Recently, the machine tools called multi-task machines, which mounted rotary axes on the table or spindle are used increasingly. Accordingly, multi-task machine tool takes a growing interest on the motion accuracy of feed drive system. In this study, measurement and diagnosis of motion errors ware attempted from circular pattern obtained by using DBB (Double ball bar) device. Those were obtained at both clockwise and counter clockwise motions in mutually perpendicularly intersecting three planes. The reliability of error measurement system for multi-task machine tool was verified by the direct test cutting.

  • PDF

암석 절리면의 기본마찰각 결정을 위한 실험적 고찰 (Experimental Study for determining the Basic Friction Angle of the Rock Joint)

  • 장현식;정종택;장보안
    • 지질공학
    • /
    • 제26권4호
    • /
    • pp.447-460
    • /
    • 2016
  • 이 연구에서는 직접적으로 기본마찰각을 측정할 수 있는 직접전단시험과 삼축압축시험, 간접적으로 측정할 수 있는 기울임 시험을 이용하여 톱 절단면, #100 연마면, #600 연마면 등 총 3종류의 면을 갖는 황등 화강암과 Berea 사암의 기본마찰각을 측정하고 시험 결과들을 서로 비교하였다. 직접전단시험과 삼축압축시험에서 측정된 기본마찰각은 대체로 정확하지만 면의 상태에 따라서는 매우 차이가 나는 값이 측정되기도 한다. 기울임 시험은 모든 암종에서, 모든 면의 상태에서 유사한 결과를 산출하여 기본마찰각의 측정에 유용하게 사용될 수 있음을 보여주지만, 오차의 범위는 직접적인 시험에 비하여 비교적 넓은 범위를 보인다. 안정된 기본마찰각을 측정하기 위해서는 톱 절단면 보다는 전단면을 항상 일정하게 유지시킬 수 있는 연마면을 사용하는 것이 유리하며, 연마면 중에서도 #600 연마면 같이 매우 매끄러운 면 보다는 #100 연마면 같은 부드러운 수준의 면에서 보다 안정된 결과를 얻을 수 있다. 그러므로 #100 연마면 시료에서 직접전단시험이나 삼축압축시험으로 측정된 기본마찰각이 가장 신뢰성이 높을 것으로 예상되며, #100 연마면 시료에 대한 기울임 시험도 기본마찰각을 측정하는데 있어서 충분한 신뢰성을 갖는 것으로 판단된다.

사용후핵연료봉 slitting 장치 성능 평가 (Capacity evaluation on the slitting device of the spent fuel rod)

  • 정재후;윤지섭;김영환;진재현;김동기
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2003년도 춘계학술대회 논문집
    • /
    • pp.1154-1157
    • /
    • 2003
  • The spent fuel slitting device is an equipment developed for the separation of the pellet and hull from the cutting fuel rod with length of 250 mm, and in order to feed UO$_2$ pellet. We have analyzed on the existing technologies for designing and producing of the slitting device in the first year(2001), based on these results, designed and produced the rod slitting device. It has effectively separated the pellet from the hull, but demanded the supplement separation work because of the mixing with pellet and hull in the vessel, and required the condition for the reducing time of the process. In the second year(2002), we have reduced the work time, performed the test and capacity evaluation with the improving device, based these results, and ensured the data demanded for designing of the spent fuel rod slitting device. We have compared with the DUPIC(Direct use of spent PWR fuel in CAND reactors) process, and developed the device for the purpose of reducing over 40 % in comparition with the DUPIC operation time(5 minutes). Based on these results, it will is effectively applied to available data for designing and producing of the hot test facility.

  • PDF

16 극의 반경방향 전자석을 갖는 자기부상 주축계 연구 (A Study on the Magnetically Suspended Spindle with 16-pole Radial Magnets)

  • 박종권;노승국;경진호
    • 한국정밀공학회지
    • /
    • 제19권2호
    • /
    • pp.203-212
    • /
    • 2002
  • Active magnetic hearings allow much high surface speed than conventional ball bearings and therefore greatly suitable for high speed cutting. This paper describes a design and test of an active magnetic bearing system with 16-pole radial magnets. The spindle is originally designed for a CNC lathe and driven by outer motor with 5.5 kW power and maximum speed 10,000 rpm. Considering static load condition and geometric restrictions, radial magnet is designed 16-pole type for smaller outer diameter of the spindle system. Dynamic system characteristics such as natural frequency, critical speed, stiffness, damping and system stabilities are simulated with a rigid rotor model including direct feedback controller. The designed spindle system is realized with digital PIDD controller to compensate phase lag of PWM amplifier and magnet coils. With levitation and step response experiment the control system characteristics are tested, and the spindle is rotated up to 10,000 rpm stab1y.

Event Horizon Telescope : Earth-sized mm-VLBI array to image supermassive black holes

  • Kim, Jae-Young
    • 천문학회보
    • /
    • 제44권1호
    • /
    • pp.59.1-59.1
    • /
    • 2019
  • Immediate vicinity of a supermassive black hole (SMBH) is an important place to test general relativity in strong gravity regime. Also, this is a place where mass accretion and jet formation actively occurs at the centers of active galaxies. Theoretical studies predict presence of bright ring-like emission encircling an accreting SMBH with a diameter of about 5 Schwarzschild radii, and a flux depression at the center (i.e., BH shadow). Direct imaging of the BH shadow is accordingly of great importance in modern astrophysics. However, the angular sizes of the horizon-scale structures are desperately small (e.g., ~40-50 microarcseconds (uas) diameter for the nearest best candidates). This poses serious challenges to observe them directly. Event Horizon Telescope (EHT) is a global network of sensitive radio telescopes operating at 230 GHz (1.3 mm), providing ultra-high angular resolution of 20 uas by cutting-edge very long baseline interferometry techniques. With this resolution, EHT aims to directly image the nearest SMBHs; M87 and the galactic center Sgr $A{\ast}$ (~40-50 uas diameters). In Spring 2017, the EHT collaboration conducted a global campaign of EHT and multiwavelength observations of M87 and Sgr $A{\ast}$, with addition of the phased ALMA to the 1.3mm VLBI array. In this talk, I review results from past mm-VLBI and EHT observations, provide updates on the results from the 2017 campaign, and future perspectives.

  • PDF

R/P 마스터모델을 활용한 정밀주조 공정기술의 개발 (Development of Investment Casting Technique using R/P Master Model)

  • 임용관;정성일;정해도
    • 한국정밀공학회지
    • /
    • 제16권6호
    • /
    • pp.52-57
    • /
    • 1999
  • Funtional metal prototypes are often required in numerous industrial applications. These components are typically needed in the early stage of a project to determine form, fit and function. Recent R/P(Rapid Prototyping) part are made of soft materials such as plastics, wax, paper, these master models cannot be employed durable test in real harsh working environment. Parts by direct metal rapid tooling method, such as laser sintering, by now are hard to get net shape, pores of the green parts of powder casting method must be infiltrated to get proper strength as tool, and new type of 3D direct tooling system combining fabrication welding arc and cutting process is reported by song etc. But a system which can build directly 3D parts of high performance functional material as metal part would need long period of system development, massive investment and other serious obstacles, such as patent. In this paper, through the rapid tooling process as silicon rubber molding using R/P master model, and fabricate wax pattern in that silicon rubber mold using vacuum casting method, then we tranlsated the wax patterns to numerous metal prototypes by new investment casting process combined conventional investment casting with rapid pototyping & rapid tooling process. with this wax-injection-mold-free investment casting, we developed new investment casting process of fabricating numerous functional metal prototypes from one master model, combined 3-D CAD, R/P and conventional investment casting and tried to expect net shape measuring total dimension shrinkage from R/P part to metal part.

  • PDF

급식시설의 손 세척을 위한 70% 알콜 소독제 사용 및 세척방법의 적용효과 분석 (Effectiveness of 70% Alcohol Solution and Hand Washing Methods on Removing Transient Skin Bacteria in Foodservice Operation)

  • 곽동경;장혜자;류경;김성희
    • 대한영양사협회학술지
    • /
    • 제4권2호
    • /
    • pp.235-244
    • /
    • 1998
  • Hand washing is an important component of hygiene program for food handlers. Hands can be a source of direct or indirect contamination of foods with pathogenic microorganisms. In this study, the effectiveness of hand washing methods and the use of 70% alcohol solution against transient skin bacteria was tested in an university foodservice facility. 70% alcohol solution is sprayed for 5 seconds automatically when hands are placed in the dispenser. Samples were taken using swab technique in meat cutting area, vegetable trimming area, and vegetable cutting area: before and after washing hands according to planned methods, and after being sprayed with 70% alcohol solution after washing hands. The bacteriological analysis of total plate counts, coliform, fecal coliform of food handlers' hands was done. Statistical data analysis was completed with Mann-Whitney U test and Kruskal-Wallis model using the SPSS program. The levels of initial contamination of workers' hand were significantly different by the work areas($x^2$=9.156, p<0.01). Workers in the vegetable trimming area had more heavily soiled hands than in the other work areas. Mean of TPC counts and coliform was 8.97×$10^5$ CFU/12.4$cm^2$, 2.93×$10^2$ MPN/12.4$cm^2$ respectively, but fecal coliform was not detected. Transient bacteria were removed from hands after washing and using 70% alcohol solution but were not removed completely. Mean reduction percentage in TPC varied among work areas and ranged from 93.19% to 94.99%, and in coliforms from 97.31% to 100%. A significant difference in TPC was found between before and after hand disinfection (Z=-2.714, p<.01) and between standardized hand washing procedures and un-standardized hand washing procedures(z=-2.301, p<.01). Subjects using the hand sanitizer showed a great elimination of TPC(99.45% reduction), but this effect was valid only after following proper washing procedures. Based on the results, the most effective hand washing method was recommended as the combination of the standardized hand washing procedure with warm-water and use of the 70% alcohol solution. The results can be used to develop hand hygiene programs and training strategies for enhancing hand hygiene practices for food handlers in foodservice operations.

  • PDF

도시가스 매설배관 보수기준 개발에 관한 연구 (A Study on the Development of the Repair Standards for Underground Pipelines Carrying Natural Gas)

  • 류영돈;이진한;조영도
    • 한국가스학회지
    • /
    • 제20권4호
    • /
    • pp.33-43
    • /
    • 2016
  • 미국과 유럽의 가스회사에서는 배관의 보수방법으로 그라인딩, 육성용접, 슬리브덮개용접, 복합재료보수, 핫태핑, 클램프 등 다양한 방법을 사용하고 있으며, 배관에 손상이 발생한 경우 사용적합성 평가를 거쳐 배관보수를 실시하고 있다. 또한, 미국과 영국 등에서는 매설된 도시가스배관이 타공사 또는 부식으로 인해 손상을 입은 경우 손상형태별로 적용 가능한 배관보수방법을 규정하고 있다. 국내의 경우에는 노후된 중압배관에 대하여 정밀안전진단을 하도록 하고 있으며, 정밀안전진단결과 발생된 결함의 종류 및 정도에 따라 배관을 보수, 교체 또는 신설하도록 규정하고 있다. 그러나 보수 및 보강 방법에 대하여는 기준이 마련되어 있지 않아 배관에 손상이 발생한 경우 주로 손상된 배관을 절단한 후 단관(短管)으로 교체하는 방법만을 사용하고 있다. 본 논문에서는 미국, 영국 등 국외의 보수방법 및 기준을 조사하고, 국내의 매설배관 검사 방법 등에 대해 조사하고, 보수방법 시험 결과를 분석한 후 국내 실정에 맞는 배관보수기준(안)을 제시하였다. 개발되는 기준에 따라 도시가스사업자가 정밀안전진단 결과의 후속조치로 배관보수를 하는 경우 가스공급을 중단하지 않아도 되므로 가스의 안정적 공급에 기여할 수 있을 것으로 판단된다.