• Journal of the Korean Geotechnical Society
• /
• v.26 no.7
• /
• pp.147-159
• /
• 2010

The settlement prediction is very important in preloading method for a construction site on the soft ground. At the design stage, however, it is hard to predict the settlement exactly due to limitations of the site survey. Most of the settlement prediction is performed by a regression settlement curve based on the field data during construction. In Korea, hyperbolic method has been most commonly used to align the settlement curve with the field data, because of its simplicity and many application cases. The results from hyperbolic method, however, may differ by data selections or data fitting methods. In this study, the analyses using hyperbolic method were performed about the field data of $\bigcirc\bigcirc$ site in Pusan. Two data fitting methods, using an axis transformation or an alternative method which is a direct regression method, were applied with various data groups. If data was used only after the ground water level being stabilized, fitting results using both methods were in good agreement with the measured data. Regardless of the information about the ground water level, the alternative method gives better results with the field data than the method using an axis transformation.

• Conservation Science in Museum
• /
• v.29
• /
• pp.99-110
• /
• 2023

The stone fragments that are missing from the stone cultural heritage have limited use beyond being directly fitted to identify their original position, as they are relatively heavy and bulky, and there is the further risk of secondary physical damage during manual work. Therefore, in this study, morphological relationships between the missing parts and the stone fragments were identified through digital restoration, and a three-dimensional (3D) printed replica was created for use at the exhibition for Stone Buddhas in Four Directions in Hwajeon-ri, Yesan, where 72 stone fragments had been excavated together. First, for the digital restoration, stone fragments of similar shapes were selected after the coordinates of the 3D scanning model were aligned in virtual space. In addition, the stone fragments were printed using a 3D printer to check whether they were physically related to the missing parts. Thus, the original positions of a total of nine stone fragments were identified. To utilize these research results in the exhibition, a 1:1 replica of the Stone Buddhas in Four Directions was produced using 3D printing technology, and the nine stone fragments were also restored to their original positions. The digital technology used in this study is of great importance in that it not only made up for the limitations of the direct manual method but also suggested the possibility of expanding its application to the fields of documentation, restoration, and replication of similar cultural heritage.

• Korean Association of Arts Management
• /
• no.52
• /
• pp.39-73
• /
• 2019

The purpose of this study is to explore the issues and alternatives in the promotion of space and exhibition support projects in visual arts, and to suggest an applicable direction of the government grant program. For this study, FGI and in-depth interviews were conducted in the direct beneficiaries of the grant program, the staff of the grant program, and the group of visual arts expert. As a result, the deliberation and selection of the support project should be carried out with sufficient time in consideration of the specificity of the support project. And the project requires to divide into two kinds of the projects based on the understanding of the social role and differentiation of non-profit exhibition spaces and private art museums. For the grant application and assessments, a long-term support is necessary to bring the capability and issues in efficient allocation of the budget, flexibility of budget item, and the budget shortfalls. Furthermore, the reliability between the grant program and beneficiaries needs to form a healthy partnership, and the evaluation criteria and eNARADOEUM system should be more practical and rationally established. Through this analysis, the implications of understanding the specificity of visual arts support projects, establishment of sustainable visual arts creation policies, and budget utilization were derived. Consequently, cultural and artistic support projects were directed to place more emphasis on efficiency than control, direction considering the position of consumers than suppliers, and long-term business planning rather than short-term perspective.

• International Journal of Computer Science & Network Security
• /
• v.22 no.2
• /
• pp.348-356
• /
• 2022

The article is devoted to substantiation of theoretical and methodical bases of formation of the organizational-economic mechanism of maintenance of stability of development of region on the bases of influence of potential-forming space in the conditions of formation of creative economy. It was found that the organizational-economic mechanism due to its multifaceted nature does not have a single generally accepted definition, and its acceptable scale and complexity is reflected in the structure, which is very dependent on the scope and conditions of its application, can be very different and contain different elements. In view of this, in order to highlight the characteristics that are inherent in the organizational-economic mechanism of sustainable development of the region on the basis of potential-forming space in the formation of creative economy, the article examines the properties and characteristics of direct organizational and economic mechanism. The necessity of basing the process of formation of any organizational-economic mechanism, including the organizational-economic mechanism of ensuring the sustainability of the region on the basis of the potential-forming space in the conditions of creative economy on the system of principles. In this context, the author's vision is proposed and a set of principles for the formation of organizational-economic mechanism for sustainable development of the region on the basis of the potential of the potential-forming space in the creative economy, as well as revealed the essence of each. According to the structural aspect, the organizational-economic mechanism of ensuring the sustainability of the region's development on the basis of the potential-forming space is proposed to be presented as a set of seven stages, which are implemented in a certain sequence. Within the limits of this research the sequence of realization of the stages making process of formation of the organizational-economic mechanism of maintenance of stability of development of region on the basis of influence of potential-forming space in the conditions of formation of creative economy is defined and their maintenance and essence is presented.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2D
• /
• pp.245-253
• /
• 2009

Road facility is the most fundamental infrastructure for traffic and various information for smooth traffic is included in road surfaces. Various information included in road surfaces should be often removed and reinstalled by partial damage and aging. In addition, the existing road surface information should be removed in order to mark new information as traffic information changes. The existing road surface removal method suing grinders and torches had problems such as dangerous working equipment and workers' direct exposure to cars. In addition, although water-jet system using super high-pressure water was used to remove road surface in order of improvement of traditional method, there are another problems such as limitations according to water-tanks and water frost on the road surfaces after work. Therefore, this study analyzes and suggests systems to develop prototype after analyzing dry ice blaster in order to improve the current road surface removal methods. In addition, the study analyzes the possibility of introduction of dry ice blaster through a test for proposing an automatized equipment for new road surface mark removal considering environment and work efficiency, and compare traditional method with introduced dry ice blaster for operating cost.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.55-65
• /
• 2006

This paper presents the closing analysis of a symmetric steel cable-stayed bridge erected by a free cantilever method. Two independent structural systems are formed before the closing procedure of a bridge is performed, and thus the compatibility conditions for vertical displacement and rotational angle are not satisfied at the closing section without the application of proper sectional forces. Since, however, it is usually impossible to apply sectional forces at the closing section, the compatibility conditions should be satisfied by proper external forces that can be actually applicable to a bridge. Unstrained lengths of selected cables and the pull-up force of a derrick crane are adjusted to satisfy nonlinear compatibility conditions, which are solved iteratively by the Newton-Raphson method. Cable members are modeled by the elastic catenary cable elements, and towers and main girders are discretized by linear 3-D frame elements. The sensitivities of displacement with respect to the unstrained lengths of selected cables and the pull-up force of the derrick crane are evaluated by the direct differentiation of the equilibrium equation. A Monte-Carlo simulation approach is proposed to estimate expected construction errors for a given confidence level. The proposed method is applied to the second Jindo Grand Bridge to demonstrate its validity and effectiveness.

• 지역과문화
• /
• v.6 no.4
• /
• pp.23-45
• /
• 2019

The main research is on how to find source stories and develop and utilize content that will properly show the value of Panmunjom and the surrounding DMZ on the Korean Peninsula, which are receiving worldwide attention. Three methods were used as research for the high-end branding of Panmunjom and the surrounding DMZ. The first is the interest of prospective visitors through the travel cycle, using Joseph Campbell's "The Hero's Journey." The second was to incorporate Roland Bart's "third meaning" into the subjective travel and emotional stimulation, which is the trend of modern travel. The third introduced Kevin Lynch's theory and tried to place five elements of the path, edge, district, node and landmark in the core location of Panmunjom. Through the study, the excavation of contents in Panmunjom and the surrounding DMZ needs to be collected to a third meaning using a direct interview method that listens to the stories of related figures as well as organizing historical events. The priority should be given to those over the age of 80 and interviews should be conducted at least three times and over three generations. The process of building it into an archive, selecting a story, and then going through a culture collage and networking and branding takes place in five stages. This can create a virtuous circle of content processing, content utilization, job creation in the region and revitalizing the local economy through discovery of source stories and storytelling. Content development should be able to touch sensibility while saving time, history, place, originality and sincerity. Taking the center between tourism and travel, development and damage concerns, a careful but long-term plan and large-scale discovery of source stories should be made, and a consensus should be formed on the need for proper storytelling.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.111-111
• /
• 2022

According to data from the Ministry of Environment, food waste accounted for 27% of the nation5 s household waste in 2020, and 4.67 million tons of food waste is being discharged per year. According to the Food Waste Direct Landfill Prohibition Act, food waste must be incinerated, composted, fodder, and decomposed before landfilling. The cost of incineration and landfilling of food waste is considerable. Therefore, through the process of turning food waste into fertilizer, we are going to investigate the limit of crop application and the change in the growth of crops during continuous use of food waste fertilizer. This study investigated the growth of lettuce such as shoot length, root length, leaf number, fresh weight, and dry weight after treating lettuce with food waste dry powder mixed fertilizer. The experiment was carried out continuously in 2021 (1st year) and 2022 (2nd year), and the treatment groups were set to No Treatment (NT), Chemical Fertilizer (CF), Mixed Fertilizer (MF×1), and Mixed Fertilizer×2 (MF×2), was repeated 3 times. As a result of the 1st year growth survey, there was no significant difference between NT and CF in the case of shoot length, but MF×1 and MF×2 were significantly decreased compared to NT. Root length was not significantly different in all treatment groups. As for the leaf number, there was no significant difference between NT and MF×1, but CF and MF×2 were significantly decreased compared to NT. In fresh weight, MF×1 and MF×2 were significantly decreased compared to NT, and in the case of dry weight, there was no significant difference between NT, MF×1, and MF×2. As a result of the 2nd year growth survey, there was a significant difference in CF and MF×2 in leaf number, but there was no significant difference in all treatment groups with respect to shoot length, root length, fresh weight, and dry weight. Through continuous additional research, it is necessary to confirm the change in soil composition and the growth of crops due to food waste fertilizer treatment.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.226-233
• /
• 2023

In this study, two phases were conducted to investigate the direct injection of gaseous CO₂ into cement mortar. The aim was to advance carbon capture, utilization, and storage (CCUS) technology by harnessing industrial waste CO₂ from the domestic ready-mixed concrete industry. In the first phase, the factors influencing the physical properties of cement mortar when using gaseous CO₂ were identified. This included a review of materials to achieve physical properties comparable to a reference formulation. As a result of this phase, it was confirmed that traditional approaches, such as adjusting the water-to-cement ratio, had limitations in achieving the desired physical properties. Consequently, the second phase focused on the optimization of CO₂-injected mortar. This involved studying the CO₂ application and mixing method for cement mortar. Changes in properties were observed when gaseous CO₂ was injected into the mortar. The optimal injection quantity and time to enhance the compressive strength of mortar were determinded. As a result, this study indicated that an extra mixing time exceeding 120 seconds was necessary, compared to conventional mortar. The optimal CO₂ injection rate was identified as 0.1 to 0.2 % by weight of cement, taking both flowability and compressive strength performance into account. Increasing the CO₂ injection time did not further enhance strength. For this approach to be employed as a CCUS technology, additional studies are required, including a microstructural analysis evaluating the amount of immobilized CO₂.

• Journal of Korea Water Resources Association
• /
• v.56 no.10
• /
• pp.655-665
• /
• 2023

In this study, unit hydrographs are calculated when precipitations of 10 scales instantaneously occurs in a virtual watershed with a constant slope and roughness. Then, the relationship between the peak flow rate and the peak occurrence time of the unit hydrograph was calculated for the precipitation scale, respectively. At this time, the virtual watershed simplified with a rhombic shape, a constant slope, and a flow condition with a certain roughness was applied instead of a natural watershed in order to understand the effect the precipitation scale has on the peak value of the unit hydrograph. And it was assumed that the precipitation in the basin was effective rainfall and the runoff was direct runoff, and the runoff flowed in a straight, uniform flow from the drop point to the outlet. The relationship between the peak flow and the peak occurrence time of the unit hydrograph was calculated in the case of 10 types of precipitation scales of 10 mm, 40 mm, 90 mm, 160 mm, 250 mm, 360 mm, 640 mm, 1,000 mm, 1,210 mm, and 1,690 mm of effective precipitation. A noteworthy achievement of this study is that, even without the storage effect of the watershed, as the scale of precipitation increases, the depth of runoff increases, so the flow rate in the watershed increases and the distance per unit time increases, so the peak flow rate increases and the peak occurrence time increases. This is a nonlinear characteristic of watershed runoff.