• 제목/요약/키워드: Direct Current (DC)

검색결과 435건 처리시간 0.024초

초전도 전류제한소자를 적용한 DC 차단기의 동작 특성 분석 (Analysis of Operation Characteristics of DC Circuit Breaker with Superconducting Current Limiting Element)

  • 정병익
    • 한국전자통신학회논문지
    • /
    • 제15권6호
    • /
    • pp.1069-1074
    • /
    • 2020
  • DC에는 전류 영점이 없기 때문에 DC 차단기의 차단 동작시 아크가 발생한다. 이때 발생하는 아크의 크기에 따라 회로 차단기의 열화 또는 그리드에 치명적인 사고를 발생시킬 수 있다. 따라서 HVDC의 상용화에 있어서 DC차단기의 차단 성능의 안정성 확보는 대단히 중요한 부분이다. 본 연구에서는 DC 차단기의 성능과 신뢰성을 향상시키기 위해 초전도체가 적용된 LC 차단기를 제안하였다. 초전도 LC 차단기는 기존 LC 차단기의 인덕터에 초전도 코일을 적용한 구조로 되어있다. 초기 고장 전류를 제한하는 것 외에도 고장 발생시 안정적인 전류 0점을 생성한다. 이를 확인하기 위해 EMTDC / PSCAD 프로그램을 통해 시뮬레이션을 수행하였다. 또한 초전도 LC 차단기는 일반 코일이 적용된 LC 차단기와의 동작 특성을 비교하였다. 그 결과 초전도 코일이있는 LC 회로 차단기는 일반 코일이있는 LC 회로 차단기에 비해 초기 고장 전류를 약 12kA 더 제한하는 것으로 나타났다. 이러한 결과를 통해서 DC 차단기의 아크 소화 시간을 약 0.16 초 단축시킬 수 있었고, 이를 통해 회로 차단기의 전기적 부담이 줄어드는 것을 확인할 수 있었다.

고속 엘리베이터에서 3상 유도전동기의 강건한 구동을 위한 DTIF 제어기의 구현 (Implemention of a DTIF Controller for Robust Drive of a 3 Phase Induction Motor in High-Speed Elevator)

  • 김동진;강창수;한완옥
    • 한국조명전기설비학회지:조명전기설비
    • /
    • 제9권3호
    • /
    • pp.88-96
    • /
    • 1995
  • 고속 엘리베이터는 높은 안정성과 제어성이 필요하므로 기동, 정지시에 영 속도를 포함한 정밀 구동이 필요하다. 유도전동기의 정밀 구동을 위하여 사용되어온 벡터 제어 기법은 슬립 주파수 제어에 의한 간접 벡터 제어와 계자편향에 의한 직접벡터 제어의 두가지 종류로 분류할 수 있으며, 직접벡터제어의 경우 전동기 제어 변수의 변화에 강건한 반면에 직접 벡터 제어의 경우 비교적 넓은 속도구간에서 제어가 가능하다는 장점을 가지고 있다. 본 논문에서 토크는 직접 벡터기반으로 제어하고, 지속은 간접 벡터 기반으로 제어함으로써 유도전동기의 과도상태 동작과 시동시 영 속도 부근 및 저속 영역에서의 동작이 보다 강건하도록 개선된 직접토크-간접자속(DTIF, Direct Torque Indirect Flux)제어기를 제시하였다. 3상 유도전동기의 구동을 위하여 제안된 시스템의 수행결과는 시뮬레이션과 실험을 통하여 입증하였으며, 영 속도부근과 저속에서 고속으로의 변환과정은 속도응답에 대한 상전압, 상전류 그리고 DC링크 전류를 비교 측정하여 안정하고 강건한 속도변화가 이루어짐을 확인 할 수 있었다.

  • PDF

A Direct Single-phase Quasi-resonant AC-AC Converter with Zero Voltage Switching

  • Antchev, Mihail Hristov
    • Journal of Power Electronics
    • /
    • 제17권4호
    • /
    • pp.860-873
    • /
    • 2017
  • The present article reports an analysis and investigation of a direct AC-AC quasi-resonant converter. A bidirectional power device, whose switching frequency is lower than the frequency of the current passing through the load, is used for its realization. The zero voltage switching mode is described when zero voltage on the power device is available by measuring it with the control system. The continuous current in the resonant inductance by switching the power device at zero voltage is considered, and it is characterized by two sub-modes. A mathematical analysis of the processes has been made and comparative results from the computer simulation and experimental study have been brought. The converter can be used in a wide areas of power electronics: induction heating, wireless power transfer, AC-DC converters, etc.

지하철 직류 급전시스템의 표유전류 실태 분석(II) 부산 지역 (Analysis of the Stray Current Conditions in Subway DC Electrification System (II) Busan Metropolitan Area)

  • 하윤철;하태현;배정효;김대경;이현구
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 B
    • /
    • pp.1367-1369
    • /
    • 2004
  • When an underground pipeline runs parallel with subway DC electrification system, it suffers from stray current corrosion caused by the stray current from the rails negative returns. Perforation due to the stray current corrosion may bring about disastrous accidents such even in cathodically protected systems. Traditionally, bonding methods such as direct drainage, polarized drainage and forced drainage have been used in order to mitigate the damage on pipelines. In particular, the forced drainage method is widely adopted in Busan. In this paper, we report the real-time measurement data of the pipe-to-soil potential variation in the presence and absence of the IR compensation. The drainage current variation was also measured using the Stray Current Logger developed. By analyzing them, the problems of current countermeasures for stray current corrosion are discussed.

  • PDF

PDP용 반파 공진형 멀티출력 하프브리지 컨버터의 다중 공진특성에 관한 연구 (A Study on the Multi-resonant characteristics of Half-wave Resonant Type Multi-output ZVS HB Converter for the Plasma Display Panel)

  • 이재삼;손호인
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제55권6호
    • /
    • pp.314-324
    • /
    • 2006
  • In recent years, having the advantages of being small, low in cost and high in efficiency, Half-wave resonant type, (having only one output diode), is used in ZVS Half-Bridge DC/DC converter. This paper presents the operation mode by multi-resonant factors in the Half-wave type multi-resonant converter with direct Buck chopper circuit operated in discontinuous current mode. To study the characteristics of a multi-resonant operation in steady-state, the characteristic impedances in each mode and safe operation-region(S.O.R) are reported. Computer simulation and experimental data are also riven to verify the theoretical results.

연료전지 발전 시스템용 고주파 링크 DC-AC 컨버터 (A High Frequency Link Direct DC-AC Converter for Fuel Cell Power Source)

  • 송유진;정봉만;한수빈;정학근;박석인
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2004년도 추계학술대회 논문집
    • /
    • pp.124-126
    • /
    • 2004
  • This paper describes a boost converter cascaded high frequency link direct do-ac converter suitable for fuel cell power sources. A new multi-loop control for a boost converter to reduce the low frequency input current harmonics drawn from fuel cell is proposed. A new PWM technique for the cycloconverter at the secondary to reject the low order harmonics in the output voltages is presented in detail.

  • PDF

중첩전압(직류+교류 60Hz)에서 산화아연 피뢰기 소자의 누설전류 특성 (The characteristic of leakage current in ZnO surge arrestor elements with mixed direct and 60Hz voltage)

  • 이복희;박건영;강성만;최휘성;오성균
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
    • /
    • pp.186-188
    • /
    • 2003
  • The ZnO surge arrester is the protective device for limiting surge voltages on equipment by diverting surge current and returning the device to its original status. The occurrence of overvoltage appears in any phase to AC power supply system and it appears in mixing AC and impulse voltages, moreover because HVDC power supply system uses converter in semiconductor, it makes mixed DC and high harmonics voltages. In this study, the various mixed AC and DC voltages was made for investigating the degradation effect of ZnO arrester according to mixed voltage. As a result, the increase of DC component to mixed voltages causes the increase of resistive component of total leakage current to ZnO block. In changing V-I curve for mixed voltages, the cross-over point acts a factor as making the proper capacitor size of an equivalent circuit for ZnO block.

  • PDF

A Bidirectional Dual Buck-Boost Voltage Balancer with Direct Coupling Based on a Burst-Mode Control Scheme for Low-Voltage Bipolar-Type DC Microgrids

  • Liu, Chuang;Zhu, Dawei;Zhang, Jia;Liu, Haiyang;Cai, Guowei
    • Journal of Power Electronics
    • /
    • 제15권6호
    • /
    • pp.1609-1618
    • /
    • 2015
  • DC microgrids are considered as prospective systems because of their easy connection of distributed energy resources (DERs) and electric vehicles (EVs), reduction of conversion loss between dc output sources and loads, lack of reactive power issues, etc. These features make them very suitable for future industrial and commercial buildings' power systems. In addition, the bipolar-type dc system structure is more popular, because it provides two voltage levels for different power converters and loads. To keep voltage balanced in such a dc system, a bidirectional dual buck-boost voltage balancer with direct coupling is introduced based on P-cell and N-cell concepts. This results in greatly enhanced system reliability thanks to no shoot-through problems and lower switching losses with the help of power MOSFETs. In order to increase system efficiency and reliability, a novel burst-mode control strategy is proposed for the dual buck-boost voltage balancer. The basic operating principle, the current relations, and a small-signal model of the voltage balancer are analyzed under the burst-mode control scheme in detail. Finally, simulation experiments are performed and a laboratory unit with a 5kW unbalanced ability is constructed to verify the viability of the bidirectional dual buck-boost voltage balancer under the proposed burst-mode control scheme in low-voltage bipolar-type dc microgrids.

연료전지용 전류형 고주파 링크 DC-AC 컨버터 (A Current-fed High Frequency Link Direct DC-AC Converter for Fuel Cell Power Source)

  • 송유진;정세교
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
    • /
    • pp.102-106
    • /
    • 2005
  • 본 논문에서는 연료전지 전원시스템에 적합한 전류형 고주파 링크 DC-AC 컨버터를 제안한다. 제안된 전류형 고주파 링크 DC-AC 컨버터는 전류형 풀-브릿지 인버터, 능동 고조파 필터, 고주파 링크 변압기, 사이클로 컨버터로 구성된다. 1차측의 전류형 고주파 풀-브릿지 인버터는 정현파 PWM에 의해 변조된 전류펄스를 영전류 스위칭과 함께 발생시키고 두 개의 양방향 스위치와 출력 필터 캐패시터만으로 구성된 사이클로 컨버터는 분리형 단상 60Hz 정현파 전압을 출력한다. 입력단에 연결된 능동 고조파 필터는 연료전지로부터 유기된 저고조파 전류를 배터리 또는 수퍼캐패시터같은 장시간의 에너지 저장장치 없이 제거한다.

  • PDF