• 제목/요약/키워드: Direct Comparison Method

검색결과 585건 처리시간 0.028초

Dynamic identification of soil-structure system designed by direct displacement-based method for different site conditions

  • Mahmoudabadi, Vahidreza;Bahar, Omid;Jafari, Mohammad Kazem;Safiey, Amir
    • Structural Engineering and Mechanics
    • /
    • 제71권4호
    • /
    • pp.445-458
    • /
    • 2019
  • This study mainly aims to assess the performance of soil-structure systems designed by direct displacement-based method coupled with strong column-weak beam design concept through various system identification techniques under strong ground motions. To this end, various system identification methods are employed to evaluate the dynamic characteristics of a structure (i.e., modal frequency, system damping, mode shapes, and plastic hinge formation pattern) under a strong seismic excitation considering soil-structure interaction for different site conditions as specified by ASCE 7-10. The scope of the study narrowed down to the code-complying low- to high-rise steel moment resisting frames with various heights (4, 8, 12, 16-story). The comparison of the result of soil-structure systems with fix-based support condition indicates that the modal frequencies of these systems are highly influenced by the structure heights, specifically for the softer soils. This trend is more significant for higher modes of the system which can considerably dominate the response of structures in which the higher modes have more contribution in dynamic response. Amongst all studied modes of the vibration, the damping ratio estimated for the first mode is relatively the closet to the initial assumed damping ratios. Moreover, it was found that fewer plastic hinges are developed in the structure of soil-structure systems with a softer soil which contradicts the general expectation of higher damageability of such structural systems.

Comparison of LDL-Cholesterol direct measurement with the estimate using various formula

  • Kwon, Se Young;Na, Young-Ak
    • 대한임상검사과학회지
    • /
    • 제44권3호
    • /
    • pp.103-111
    • /
    • 2012
  • Low-Density Lipoprotein cholesterol (LDLC) is the most important marker for the treatment of hyperlipidemia in NCEP-ATP III(National Cholesterol Education Program-Adult Treatment Panel III) guideline. Therefore, LDL cholesterol is pathologically meaningful, accurate measurement should be a top priority. Currently, LDLC is directly measured in most cases, but, the estimate is still used in mass health examination or screening test. This study is about the comparison of LDL-Cholesterol direct measurement with the estimate using various formula (Friedewald: [LDL-F=TC-HDL-TG/5], Nakajima: [LDL-N=TC-HDL-TG/4], Hattori: [LDL-H =0.94TC-0.94HDL-0.19TG], Puavilai: [LDL-P=TC-HDL-TG/6], Carvalho: [LDL-C=3(TC-HDL)/4]) for calculating more accurate value. We analyzed total cholesterol (TC), try-glyceride (TG), high-density lipoprotein cholesterol (HDLC), and LDLC levels of 210 subjects between June and November in 2011. Until now, the Friedewald formula is the most commonly used estimate for the LDLC. When Friedewald formula was applied, the correlation coefficient (r) was 0.940, showing high correlation. But, the result of the direct method was significantly different, compared with those of the Friedewald formula in triglyceride levels ${\geq}400mg/dL$(p<0.05). There was the highest correlation when we used LDL-P formula(r=0.947) in triglyceride levels <400 mg/dl. Also there was the lowest mean difference regardless of triglyceride level. Therefore, the study showed that TG/6 is more precise means of calculation than TG/5. On the other hand, the calculation of LDL-Cholesterol was underestimated, compared with direct measurement. It is necessary to have more data and modified Friedewald formula should be used for the accurate calculation.

  • PDF

담수직파재배 논벼의 기준작물 잠재증발산량 산정방법별 작물계수의 변화 (Variation of Crop Coefficient With Respect to the Reference Crop Evapotranspiration Estimation Methods in Ponded Direct Seeding Paddy Rice)

  • 정상옥
    • 한국농공학회지
    • /
    • 제39권4호
    • /
    • pp.114-121
    • /
    • 1997
  • In order to provide basic information for the estimation of evapotranspiration in the ponded direct seeding paddy field, both field lysimeter experiment and model prediction were performed to estimate daily ET. Various methods were used to predict daily reference crop ET and crop coefficients. Measure4 mean daily ET during the 1995 growing season varied from 5.9 to 6.1 mm depending on the species, while it varied from 5.1 to 5.5 mm in 1996. Model predicted mean daily ET during the 1995 growing season varied from 3.9 to 4.9 mm depending on the prediction model, while it varied from 3.5 to 4.7 mm in 1996. The smaller ET values both measured and predicted in 1996 were caused by the low values of temperature, sunshine hours, and solar radiation. Crop coefficients varied from 1.20 to 1.50 in 1995 depending on the prediction model, while it varied from 1.10 to 1.47 in 1996. Comparison of the seven reference crop ET prediction methods used in this study shows that the Penman-Monteith method and the FAO-Radiation method gave the lowest ET while the corrected Penman method and the Hargreaves method gave the largest ET. Since crop coefficients vary to a large extent based on the prediction methods, reference crop ET prediction method should be carefully selected in irrigation planning.

  • PDF

Temporal bone CT 검사 시 conventional scan 방식과 helical scan방식에 따른 선량 비교분석 (Dose Comparison Analysis of Temporal bone CT scan to conventional scan method during helical scan method)

  • 강수홍;박용성;이래곤;황선광
    • 대한디지털의료영상학회논문지
    • /
    • 제17권1호
    • /
    • pp.49-56
    • /
    • 2015
  • Temporal bone CT scan side skull fracture. In addition to the confirmation of the ossicles, such as fractures and dislocations, temporomandibular facial fractures, deformities surgery helps to establish a science plan. Cochlear implant surgery has been performed in the state before and after identifying purposes. Test methods are being implemented by the Conventional direct axial and Direct coronal scan, the basic method of Temporal bone CT. Helical scan is a fast Volumetric data obtained compared with the Conventional scan, the patient reduced the dose, and there are some advantages, such as reduced Beam hardening streak artifacts caused by dental fillings. This study is a comparative analysis by dose reduction for patients with a dose according to the conventional scan method and then effective from 2015 by helical scan method performed in 2014 through the retrospective survey, which was then optimized for the purpose of inspection.

  • PDF

직접 변위설계법을 이용한 구조물의 내진성능평가 (Seismic Performance Evaluation of a Structure Using Direct Displacement-Based Design Method)

  • 김진구;방성혁
    • 한국지진공학회논문집
    • /
    • 제6권2호
    • /
    • pp.1-7
    • /
    • 2002
  • 본 연구에서는 구조물의 설계방법에 국한되어 있는 직접 변위설계법을 응용하여 기존 구조물의 성능점을 산정하는 방법에 관하여 연구하였다. 개발된 방법을 이용하여 단자유도 구조물의 주기, 항복 후 강성비, 요구되는 탄성강도에 대한 항복강도비 등의 설계변수를 변화시키며, 지진 하중에 대한 응답을 구하고 그 결과를 분석하였다. 또한 10층 철골 골조의 내진성능 평가에 적용하였다. 제안된 방법의 정확성을 검증하기 위하여 기존의 내진성능 평가방법인 능력스펙트럼법과 시간이력해석법에 의한 결과와 비교하였다. 제안된 방법은 능력스펙트럼법과 동일한 결과를 보였으며 시간이력해석 결과와도 비교적 잘 일치하였다.

데이터 전송방향을 고려한 센서네트워크 클러스터링 방법 (Data Direction Aware Clustering Method in Sensor Networks)

  • 조오형;권태욱
    • 한국통신학회논문지
    • /
    • 제34권7B호
    • /
    • pp.721-727
    • /
    • 2009
  • 무선 센서 네트워크(WSN)에서는 저가 및 저 전력 센서를 활용하기 때문에 센서의 업무를 성공적으로 수행하면서 적은 에너지를 소모하는 것이 중요한 문제로 부각 된다. 기존의 계층척 WSN 알고리즘들에서 나타나는 제한점은 데이터 진행방향에 대한 역방향 전송이 이루어 질수 있다는 것이다. 본 논문은 데이터 방향성을 고려한 DDACM(Data Direction Aware Clustering Method) 방법을 제안한다. 데이터 역방향 전송 방지를 위해 클러스터헤더는 데이터 전송 방향에서 싱크노드와 가장 가까운 노드가 먼저 임명되고, 에너지 레벨이 일정량 이하 시 클러스터 헤더를 교체하는 방법융 제안한다. 실험을 통하여 LEACH(Low Energy Adaptive Clustering Hierarchy)방식과 비교하여 데이터 역방향 전송올 최소화하여 에너지 소모를 줄일 수 있음을 확인하였다.

SAS, SPSS, MINITAB, 5-PLUS에서 다변량 R-기법의 비교 (A Comparison of Multivariate R-Techniques in SAS, SPSS, Minitab and S-plus)

  • 최용석;문희정
    • 응용통계연구
    • /
    • 제17권1호
    • /
    • pp.153-164
    • /
    • 2004
  • 본 소고에서는 통계 팩키지 사용자들에게 널리 알려진 SAS 8.1, SPSS 10, Minitab 13, 5-plus 2000을 대상으로 R-기법의 다변량 분석 중 주성분분석, 인자분석의 입력 자료 형태, 입력 옵션, 출력 형태를 비교하고 각 분석의 장단점을 정리하였다. 연구의 목적은 사용자들에게 가장 적합한 팩키지를 선택하여 R-기법 다변량 자료분석을 할 수 있도록 도움을 주는 데 있다.

쌍대비교를 활용한 기업 유형 분류에 따른 보안 전략 우선순위 결정 (Prioritize Security Strategy based on Enterprise Type Classification Using Pair Comparison)

  • 김희올;백동현
    • 산업경영시스템학회지
    • /
    • 제39권4호
    • /
    • pp.97-105
    • /
    • 2016
  • As information system is getting higher and amount of information assets is increasing, skills of threatening subjects are more advanced, so that it threatens precious information assets of ours. The purpose of this study is to present a strategic direction for the types of companies seeking access to information security. The framework classifies companies into eight types so company can receive help in making decisions for the development of information security strategy depending on the type of company it belongs to. Paired comparison method survey conducted by a group of information security experts to determine the priority and the relative importance of information security management elements. The factors used in the security response strategy are the combination of the information security international certification standard ISO 27001, domestic information protection management system certification K-ISMS, and personal information security management system certification PIMS. Paired comparison method was then used to determine strategy alternative priorities for each type. Paired comparisons were conducted to select the most applicable factors among the 12 strategic factors. Paired comparison method questionnaire was conducted through e-mail and direct questionnaire survey of 18 experts who were engaged in security related tasks such as security control, architect, security consulting. This study is based on the idea that it is important not to use a consistent approach for effective implementation of information security but to change security strategy alternatives according to the type of company. The results of this study are expected to help the decision makers to produce results that will serve as the basis for companies seeking access to information security first or companies seeking to establish new information security strategies.

지상레이저스캐닝 기반 3차원 실내 모델링 (3D Indoor Modeling Based on Terrestrial Laser Scanning)

  • 홍승환;조형식;김남훈;손홍규
    • 대한토목학회논문집
    • /
    • 제35권2호
    • /
    • pp.525-531
    • /
    • 2015
  • 3차원 실내공간정보에 구축 시 경제성, 효율성 및 정확도 향상을 위한 지상레이저스캐너의 활용이 주목을 받고 있다. 그러나 실내공간정보 구축에 있어 지상레이저스캐너 관측방식과 기존 측량방식 방식에 대한 비교 연구는 미비한 실정이다. 본 연구에서는 설계도면 갱신 및 3차원 실내 모델링에 AMCW 방식 및 direct TOF 방식의 지상레이저스캐너와 토탈스테이션의 작업시간 및 위치정확도를 비교하여 지상레이저스캐너의 효율성과 경제성을 제시하였다. 비교결과, AMCW 방식은 direct TOF 방식에 비해 시간효율성이 뛰어났으며 두 관측값 사이의 RMSE는 ${\pm}1mm$ 수준으로 나타났다. 또한 지상레이저스캐닝 방식은 토탈스테이션 관측방식에 비해 2배 이상의 시간효율성을 보였으며 두 관측값 사이의 RMSE는 ${\pm}3.4cm$로 나타났다. 제시된 지상레이저스캐너를 이용한 3차원 실내모델링의 경제성과 효율성을 바탕으로 향후 3차원 실내공간 정보 구축에 지상레이저스캐닝 방식이 효과적으로 활용될 수 있을 것으로 기대된다.

황색포도상구균의 TEMPO STA와 표준 평판 배지를 이용한 정량분석법 비교 (Comparison of an Automated Technique TEMPO with Direct Plate Count Method for the Enumeration of Staphylococcus aureus)

  • 조용선;이다연;이주영;왕해진;신동빈
    • 한국식품위생안전성학회지
    • /
    • 제28권3호
    • /
    • pp.252-257
    • /
    • 2013
  • 표준 평판배지 정량검출법과 TEMPO STA를 이용한 황색포도상구균 정량 분석에 대한 상관성과 유의성을 평가하기 위해 복합조리식품에 황색포도상구균을 인위적으로 접종하여 결과값을 통계 처리하여 유의성을 조사한 결과 두 실험방법간에는 유의적 차이가 없었다(p < 0.05). 상관계수($r^2$)는 0.9672로 두 실험간에는 높은 연관성을 보였다. TEMPO STA를 466개의 시료에 적용한 결과 454개(97.4%)의 시료는 문제가 없었으나 이중 12개의 시료에서는 error가 발생하였다. 그러나 TEMPO법은 실험 단계 간편하고 사용이 쉬우며 신속한 결과를 얻을 수 있으며 자동화된 장비로 실험 과정에 의한 오류를 최소화 할 수 있는 장점이 있으며 표준시험법인 표준 평판 배지법과도 유의적인 차이가 없어 정확한 정량검출이 가능할 것으로 생각된다. 최근 식품의 안전성확보를 위해 검사 품목이 다양해지며 수도 증가하는 추세이기 때문에 황색포도상구균의 정량 검사가 정확하고 신속해야 할 필요가 있으므로 TEMPO STA법의 필요성은 앞으로 크게 늘어날 것으로 보인다.