• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.2
• /
• pp.9-19
• /
• 1997

These studies were carried out to investigate seed propagation method and conducted using stem cuttings of Styrax japonicus for using as a woody landscape plant. The results are obtained as follows. After the H\sub2\SO\sub 4\ and GA\sub 3\ treatment to the seeds of Styrax japonicus, three months of warm treatment followed by cold stratification for four months increased seed germination rate. The rooting rate of Styrax japonicus was increased by the treatment with concentrated IBA, especially highest at 7,000ppm. Rooting percentages were highest for cuttings taken on July 15, 1995. Therefore, the most effective method for rooting of Styrax japonicus was treatment with 7,000ppm IBA on July 15 cuttings, which showed rooting rate of over 90%. Half-leaf-remained cuttings were more effective than those with two leaves on rooting of Styrax japonicus. Dipping for 10 seconds in IBA solution resulted in rooting rate of over 70%. The longer the treatment time the worse the rooting.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.1
• /
• pp.36-47
• /
• 2023

This study was conducted to develop a mass production for a commercial use by germination of 4 kinds of Veronica glabrifolia Kitag., V. pusanensis Y.N.Lee, V. glabrifolia Kitag. × V. Spicata 'Alba' and V. spicata 'Ulster Blue Dwarf × V. longifolia. Veronica L. Effects of dipping time to a disinfecting fluid, light quality, temperature or vermiculite depth on the germination of Veronica L. were examined. Germination percentage in a disinfecting fluid for 120 minutes dipping was the 75.1% for V. pusanensis Y.N.Lee, and was some higher in 60 minutes dipping for all the species, but there was no significant difference according to the dipping time. The germination of the light quality was the best in complex light (red light + blue light) as the germination 92.8%, uniformity 2.3 in Veronica glabrifolia Kitag., or the germination 85.9%, uniformity 3.5 in V. pusanensis Y.N.Lee. And the germination percentage of red light was ranged from 79.1% to 95,5%, the blue light was 83.1% to 100% in the all species. However the germination in the dark condition significantly lowered as a 40.0% to 56.3% or uniformity from 5.2 to 6.5. Like this, the germination of blue light was better compare to the red light. The germination rate according to temperature was higher at 25℃ day/20℃ night ranged from 92.1% to 100%, or at 20℃ day/15℃ night as a 85.5% to 98.9% in the all species, compare to constant temperature 25℃ as a 80.9% in V. pusanensis Y.N.Lee. The germination rate of vermiculite depth was higher in 1 to 2mm ranged from 83.4% to 100%, however when the vermiculite was covered with 4mm, the germination rate significantly decreased from 45.2% to 72.1% and the hypocotyl length became longer above 3cm than that of others.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.6
• /
• pp.50-57
• /
• 2012

In this study, the beeswax extraction methods using organic solvents were examined to develop a optimal dewaxing technology for beeswax-treated Hanji. Thermally-aged beeswax-treated Hanji was dewaxed using four types of extraction methods including dipping, Soxhlet extraction, ultrasonic washing and shaking methods. Then, the aging stability of the dewaxed Hanji was evaluated in terms of variations in paper strength and in the color of the printed area with muk. The experimental results suggested that the dewaxing methods allowing solvent to flow during extraction showed superior extraction efficiency. The dipping method in which the organic solvent does not flow showed the slowest extraction rate of beeswax compared to three other methods. In terms of variations in tensile strength and folding endurance, however, no obvious differences in the aging stability were observed amongst these four extraction methods. Regarding the aging stability in terms of the color of the printed area with muk, Soxhlet extraction method showed the best performance of dewaxing.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2007.04a
• /
• pp.37-47
• /
• 2007

Factor : Structure Metal pad & SMO size Board level TC test : - Large SMO size better Board level Drop test : - Large SMO size better Factor : Structure Substrate thickness Board level TC test : - Thick substrate better Board level Drop test : - Substrate thickness is not a significant factor for drop test Factor : Material Solder alloy Board level TC test : - Not so big differences over Pb-free solder and NiAu, OSP finish Board level Drop test : - Ni/Au+SAC105, CuOSP+LF35 are better Factor : Material Pad finish Board level TC test : - NiAu/NiAu is best Board livel Drop test : - CuOSP is best Factor : Material Underfill Board level TC test - Several underfills (reworkable) are passed TCG x500 cycles Board level Drop test : - Underfill lots have better performance than non-underfill lots Factor : Process Multiple reflow Board level TC test : - Multiple reflow is not a significant actor for TC test Board level Drop test : N/A Factor : Process Peak temp Board level TC test : - Higher peak temperature is worse than STD Board level Drop test : N/A Factor : Process Stack method Board level TC test : - No big difference between pre-stack and SMT stack Board level Drop test : - Flux dipping is better than paste dipping but failure rate is more faster

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.5
• /
• pp.403-408
• /
• 1993

To clarify the effects of killing methods on biochemical changes of plaice, Paralichthys olivaceus muscle at early period after death, cultured plaices were killed by the following four different methods; 1. spiking at the brain instantly. 2. letting them to die in the air. 3. dipping in sea water including anesthetic. 4. electrifying in sea water. Immediately after death, the changes in ATP and its related compounds, ATP breakdown, and IMP or lactate accumulation rates of muscle during storage at $5^{\circ}C$ were studied. ATP in samples killed by letting and electrifying were decomposed more rapidly than spiking and dipping samples. The rate constant of ATP breakdown were $0.429h^{-1}$ for samples killed by electrifying, $0.224h^{-1}$ for letting samples, $0.195h^{-1}$ for spiking samples, and $0.167h^{-1}$ for dipping samples. The maximum speed and content of IMP or lactate accumulation were showed in samples killed by electrifying among the all killing methods. The rate constant of lactate accumulation were $2.256h^{-1}$ for samples killed by electrifying, $1.123h^{-1}$ for letting samples, $0.534h^{-1}$ for spiking samples, and $0.526h^{-1}$ for dipping samples. From the results above, it was revealed that electrifying in sea water could accelerate ATP breakdown and accumulation of IMP or lactate among the all killing methods. The other hand, dipping in sea water including anesthetic delayed those changes.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.2
• /
• pp.14-34
• /
• 1985

One of the techniques for altering the properties of wood that has received considerable attention in the last twenty years is the formation of a wood-polymer composite (WPC) by irradiation and heat-catalyst polymerization of a monomer incorporated into the wood matrix. Wood-polymer composites are the new products having the superior mechanical and physical properties and the combinated characteristics of wood and plastic. The purpose of this experiment was to obtain the basic data for the improvement of wooden materials by manufacturing WPC and Staypak. The species examined was Hyunsasi-Namoo (Populus alba ${\times}$ P. glandulosa) which had not been utilized yet. Methylmethacrylate (MMA) as monomer, benzoyl peroxide (BPO) as initiator and methyl alcohol as bulking agent were used. The monomer containing BPO was impregnated into wood pieces by the dipping and the vacuum process for 2 hours. After impregnation, the treated samples were polymerized on the hot press with pressure and heat-catalyst methods. The results obtained were summarized as follows 1. The monomer loading into wood by the dipping process was 12.13 percent and 29.99 percent by the vacuum. The polymer loading into wood by the dipping process was 6.79 percent and 15.44 percent by the vacuum. 2. Comparing with Staypak, antishrink efficiency (ASE) of WPC was 12.5 to 13.6 percent on the radial direction and 14.70 to 18.63 percent on the tangential. Antiswelling efficiency (AE) was 14.40 to 17.22 percent on the radial direction and 17.18 to 42.1 8 to 42.14 percent on the tangential. Reduction in water absorptivity (RWA) was 8.19 to 15.5 percent. As a whole, the vacuum process was better than the dipping. 3. The specific gravity of control, Staypak and WPC were 0.44, 0.66 and 0.61 to 0.62, respectively. 4. In the bending strength test, the strength in case that the load direction is on the radial surface was greater than that which the load direction is on the tangential. 5. Increasing rate of stress at proportional limit in compression perpendicular to grain was 72.26 percent in case of WPC by the dipping process, 78.93 percent by the vacuum and 99.09 percent in case of Staypak.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.2
• /
• pp.117-124
• /
• 1993

It was found that the basic principle of continuous crystal growth method was following as; the powder supplied from the feeding system is molten in the graphite crucible under the ambient gas. After forming the molten zone in the lower part of the crucible, the seed crystal is deeped into the melt and pulled down with the rotation so that the melt crystallized from the seed. When the lowering rate, rotation rate, feeding rate and temperature are correct, the single crystal can grow. The critical melt level, the feeding rate, the growth rate, the change of the shape of molten zone by the graphite susceptor and crucible, the position of work coil, the balance between the gravitational force of melt and the centrifugal force originated from the rotation of seed which are the variables of the crystal growth and the sintering phenomenon of melt surface were researched.

• Journal of Food Hygiene and Safety
• /
• v.12 no.1
• /
• pp.39-46
• /
• 1997

Mandarin orange fruits were artificially contaminated with an organophosphorus insecticide phenthoate by dipping and the residue level of phenthoate was investigated during the purification steps of dietary fiber or bioflavonoid. The removal rate of phenthoate at 8 and 0.5 ppm levels was 98% in the total dietary fiber, 99% in the insoluble dietary fiber and 99.8% in the soluble dietary fiber preparations. Kuring the preparation of biflavonoid from peels at a 5 ppm pesticide level, the removal rate was 90% in the intermediate extract and 99.9% in the final extract. In conclusion, phenthoate residues in the peels of mandarin orange were mostly removed during the preparation processes of dietary fiber of bioflavonoid and its residue level would not raise any problem in safety aspects of the purified products.

• Journal of Ginseng Research
• /
• v.13 no.1
• /
• pp.114-118
• /
• 1989

Tolclofos-methyl applied as seed dipping at 1,000 ppm for 3 hrs before sowing and soil drenching at the rate of 300 g ai./10 a in the middle of April protected emerging seedlings of Panax ginseng from damping-off caused by Rhiiutonia solani(AG2-1) in Yangjik Soil artificially infested with the pathogen. Germination rates with tolclofos-methyl, pencycuron, and control were 53.7%, 45.8%, and 7.5%, respectively, while the rate of the seeds at non-infested soil was 62.6%. The effectiveness of Tolclofos-methyl against the pathogen in the soil lasted upto 32 days in vitro. However, the transpiratio of ginseng seedlings increased greatly with chemical treatment, showing 0.02, 0.12, and 0.24 m1/cm2 leaf area/day at 0, 1,2, and 4 ppm a.i. of the fungicide, respectively.

• The Plant Pathology Journal
• /
• v.26 no.4
• /
• pp.372-379
• /
• 2010

Macrophomina phaseolina causing charcoal rot was isolated from sesame seeds (cvs. Giza 32 and Shandawel-3) collected from different localities of Assiut, Sohage and El-Minia Governorates. The fungus was found in the highest frequently in samples collected from Assiut Governorate followed by Sohag and finally EL Minia Governorate. The obtained isolates were different in their virulence on the tested sesame cvs. Also, they differed in their growth nature including colony color and sclerotial production. The color of colonies of the pathogen seem to be correlated with density of sclerotial formation. Aqueous extracts of Majorna, Wild chamomile, Geranium oil and Nees plants were highly toxic to tested isolates of M. phaseolina, in vitro. On the other hand the rest of the tested aqueous extracts had no effect. Under greenhouse conditions in 2005 and 2006 seasons, soaking seeds of sesame before sowing in aqueous extracts of Eucalyptus, Nerium, Ocimum and Roesmary plants decreased the disease incidence. Aqueous extracts of Eucalyptus and Ocimum were the most effective treatment. Dipping sesame seeds in hot water at $60^{\circ}C$ for 5 minutes increased seed germination of Giza 32 and Shandawel-3 cvs. followed by $55^{\circ}C$, $50^{\circ}C$ and $45^{\circ}C$, while $40^{\circ}C$ treatment resulted the lowest seed germination rate. Dipping sesame seeds in hot water at different temperature before planting decreased seed, seedling and charcoal rots. Soaking seeds in hot water at $60^{\circ}C$ increased greatly plant height and decreased seed, seedling rot and charcoal rot followed by $55^{\circ}C$ and $50^{\circ}C$, under greenhouse condition.