• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.344-349
• /
• 2022

A compact LPDA antenna consisting of right triangle-shaped dipole elements appended with strips is proposed for UWB applications. First, right triangle-shaped dipole elements are used instead of conventional strip dipole elements to reduce the width of the LPDA antenna. Second, the spacing between the LPDA elements is decreased to reduce the length of the LPDA antenna. Finally, strips are appended at the ends of the right triangle-shaped dipole elements in order to further reduce the width of the antenna. A prototype of the proposed antenna with 16 elements and gain > 4 dBi is fabricated on an FR4 substrate with dimensions of 44 mm×30 mm. Measured frequency band of the fabricated antenna is 2.99-14.76 GHz for a VSWR < 2, which ensures UWB operation, and measured gain range is 4.0-5.5 dBi with a front-to-back ratio larger than 10 dB. The length and width of the proposed compact LPDA antenna are reduced by 40.9% and 20.6%, respectively, compared to the conventional LPDA.

• ETRI Journal
• /
• v.34 no.1
• /
• pp.1-8
• /
• 2012

This paper proposes a reconfigurable beam-steering antenna using a bended dipole and a loop. The radiation patterns of the two antennas are cancelled or compensated, and headed towards a specific direction when the dipole and loop antenna are combined at a reasonable ratio. The proposed antenna can steer the beam directions by controlling the operation of two artificial switches. The proposed antenna was manufactured on a PCB (FR-4) and a flexible PCB (polyimide). In the case of the antenna that was fabricated on a PCB, the maximum beam directions were $+50^{\circ}$, $0^{\circ}$, and $-50^{\circ}$ in the azimuth direction using the two artificial switches, and the antenna gain was 1.96 dBi to 2.48 dBi in the operation bandwidth of 2.47 GHz to 2.53 GHz. Also, the antenna was fabricated on a flexible PCB and measured under various bending conditions for wearable applications.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1668-1671
• /
• 2003

A novel dual-frequency microstrip printed-dipole antenna operating at 5 GHz and 10 GHz is presented. This antenna is designed for wireless and mobile communication. The balance step coplanar strip is used to be a transmission line at the center of dipole with matching impedance at 50 ohm. Using the conductor strip align on the other side of antenna and adjust the width of step coplanar strip line to improved input impedance matching. By modification for matching impedance of dual frequency antenna are not affected to the radiation patterns. The Finite Difference Time Domain (FDTD) technique is applying to analyze the basic characteristic properties such as $S_{11}$ , input impedance , VSWR and radiation patterns. And these parameters are discussed. The analyze problem space are $51{\times}197{\times}175$ cells and cell dimension are ${\Delta}x=0.3\;mm$ and ${\Delta}y={\Delta}z=0.15\;mm$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1216-1224
• /
• 2003

In this paper Dual Band Log-Periodic Dipole Antenna(DLPDA), which can be used at the Cellular/IMT-2000 band, is proposed. The proposed antenna is composed of 2 of Log-Periodic Dipole Antenna(LPDA) and parasitic elements. To investigate the reliability of the proposed antenna, DLPDA is designed at the cellular/IMT-2000 band and analyzed by using the method of moment, Numerical results are compared with measured results. It is shown that although the antenna length is 70 cm, its radiation characteristics satisfied the design goals of gain, VSWR and beamwidth at the Cellular/IMT-2000 band. From these results, the proposed DLPDA is confirmed as the dual band antenna which can be used at the cellular/IMT-2000 band.

• Journal of electromagnetic engineering and science
• /
• v.2 no.2
• /
• pp.87-92
• /
• 2002

A short-ended electromagnetically coupled coaxial dipole array antenna is investigated theoretically. The antenna has an advantage of structural simplicity. The integral equations are derived for the proposed structure by use of the Fourier transform and mode expansion, and the simultaneous linear equations are obtained. The slot electric field and strip current are obtained by solving the simultaneous linear equations. The effects of slot and strip numbers on the radiation efficiency, beamwidth and directivity gain of the antenna are presented.

• Journal of Broadcast Engineering
• /
• v.21 no.3
• /
• pp.404-411
• /
• 2016

In this paper, we investigate the radio wave radiation pattern to measure the actual field strength for the transmission antenna dipole antenna and the CP-ring antenna being used in our country as FM station, and the comparison was for field application. Compare results, If the transmitting station and the relay station which is located in the middle of a service area has been a useful CP-dipole antenna (four directions). CP-ring antenna having a directivity because the reflection effect of the tower was able to adjust the orientation to prevent the spread of menstrual another service area in the main direction was able to radiate high propagation 5~9dB. Especially, If the transmitting station and the relay station is located on one side of the service area for radiating radio waves in three directions by using the CP-ring antennas focus the orientation of the antenna in populated areas and road area can improve the broadcast reception environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.497-502
• /
• 2014

In this paper, a design method for a broadband planar dipole antenna for terrestrial digital television (DTV) reception is studied. The dipole is modified to half bow-tie type for size reduction. The balun between feeding microstrip line and coplanar strip (CPS) line is implemented with a rectangular patch inserted along the center of the CPS line. The proposed antenna is the structure of dual resonances, one is due to the dipole and the other is due to the CPS line attached by the balun. The effects of various geometrical parameters on the antenna performance are examined, and the antenna is designed for terrestrial DTV band (470-806 MHz). The prototype antenna is fabricated on an FR4 substrate with a size of $95mm{\times}178mm$, and tested experimentally to verify the results of this study.

• Journal of electromagnetic engineering and science
• /
• v.2 no.1
• /
• pp.45-49
• /
• 2002

This paper presents the basic characteristics of a forced resonant type EMI dipole antennas for frequencies below 80 MHz in which two reactance elements are used for the impedance matching at the fined point. The input impedance of the short dipole less than half-wavelength is controlled by the properly determined loading position and the value of loading reactance. The numerical results show that the small-sized EMI dipole antenna with loller antenna factors for frequencies below 80 MHz can be realized by the reactance loading. In case tole proposed center driven forced resonant type EMI dipole antenna with 0.3 λ length is loaded from the center, the input impedance is matched at feed line with 50 $\Omega$, and hence the antenna has lower factors in the frequency range of 30 to 80 MHz.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.120-123
• /
• 1999

This paper presents the design method of EMC(Electromagnetic Coupling) microstrip array antenna for CS(Communication Satellite) system. Microstrip dipole antennas are attractive elements owing to the desirable properties such as simplicity, small size and linear polarization. From the optimum simulation results by the FDTD method[1], design parameters such as EMC dipole length, width, height and offset are discussed at 12CHz. The array characteristics of 5-elements and 10-elements array are also presented. By adjusting geometry of model antenna, we can design dual polarization EMC microstrip dipole antenna for CS system. Direction of nam beam is easily tilted by the control of distance between dipole elements.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.145-149
• /
• 2006

UHF band omnidirectional antennas for RFID tag were designed. Crossed loaded dipole and bended dipole were applied to be designed for both miniaturization and omnidirectional radiation pattern. By suppling 90 degrees phase difference between crossed dipoles, omnidirectional E-plane patterns can be obtained. -10 dB reflection coefficients of 3 types dipole antenna which have designed under conjugate matched with input impedance of chip were shown as 670-1,050 MHz, 700-1,250 MHz and 600-1,020 MHz, respectively, and also shown that all antenna have omnidirectional radiation pattern both E and H plane.