• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2694-2698
• /
• 2014

A multisegmented polystyrene (PS) with pH-cleavable ester and carbamate linkages was successfully synthesized by a combination of atom transfer radical polymerization (ATRP) and Cu(I)-catalyzed 1,3-dipolar cycloaddition of azide and alkynes (click chemistry). ATRP was employed to synthesize polystyrene from hydroxyl-terminated initiator using CuBr/N,N,N',N",N"-pentamethyldiethylenetriamine (PMDETA) as the catalyst. The reaction of the resulting PS with sodium azide yielded the azido-terminated polymer. The hydroxyl group in the other end of the polymer was reacted with 4-nitrophenyl chloroformate (NPC), followed by reaction with propargylamine to produce an alkyne end group with a carbamate linkage. The PS with an alkyne group in one end and an azide group in the other end was then self-coupled in the presence of CuBr/2,2'-bipyridyl (bpy) in DMF to yield a desired multisegmented PS. Molecular weight and molecular weight distribution of the self-coupled polymer increased with time, as in the typical step-growth-type polymerization processes. Finally, we demonstrated that the ester and carbamate linkages of the multisegmented PS were hydrolyzed in the presence of HCl to yield individual PS chains.

• 한국자기공명학회논문지
• /
• 제4권1호
• /
• pp.29-40
• /
• 2000

Coupled carbon-13 relaxation study of 1,1,1-trichloroethane dissolved in DMSO has been performed to gain some crucial insight into the dynamics of methyl group in this compound. For this purpose the relaxation behaviors of several observable magnetization modes for CH3 spin system generated by various perturbing pulse sequences have been carefully investigated and various dipolar spectral densities were estimated by nonlinear numerical fittings of the observed data with the relaxation curves, which were then employed to determine the three principal values for the diffusion tensor for end-over-end molecular rotation as well as internal rotational parameters of methyl group. In this process we could uniquely determine two correlation times $\tau$int(1) and $\tau$int(2) which give valuable information on internal rotor dynamics and thus obtained data were interpreted on the basis of various proposed models for internal rotation. compound undergoes three-fold jumps at 25$^{\circ}$. The fact that the ratio $\tau$int(1) / $\tau$int(2) is close to 1.0 may be interpreted as indicating that methyl group in this C.

• Macromolecular Research
• /
• 제15권1호
• /
• pp.59-64
• /
• 2007

Star-shaped, nonlinear optical (NLO) material was synthesized and its optical, thermal, and electro-optic properties were investigated. Three NLO-active dipolar chromophores containing a phenylene ring substituted with a bulky alkyl chain as a conjugation bridge were chemically bonded to the core of 1,1,1-tris(4-hydroxyphenyl)ethane to form a dendritic architecture. The chemical structure and purity of the chromophore were verified by NMR spectroscopy. The chromophore exhibited a broad absorption band centered at around 608 nm tailing up to 760 nm in toluene solution and also showed a discernible solvatochromic shift in more polar solvent. The chloroform solution of the dendrimer produced an absorption band with a red-shifted maximum as large as 28 nm when compared to that of the toluene solution. It was thermally stable up to $275^{\circ}C$ in a nitrogen atmosphere and had a glass transition temperature of $76^{\circ}C$. In a preliminary result, the polymer film containing the dendritic compound exhibited a shift of 19 pm/V taken at $1.55{\mu}$.

• 한국염색가공학회지
• /
• 제18권5호
• /
• pp.35-41
• /
• 2006

Upon $UV/O_3$ irradiation cellulose acetate (CA) films showed modified surface properties such as increased hydrophilicity and surface roughness as well as increased dyeability to cationic dyes. UV treatment induced photoscission of acetyl groups in the main chain of CA resulting in decreased degree of substitution from 2.2 to 1.3. The slight decreases in reflectance and transmittance were caused by remarkably increased nano-scale surface roughness of the CA surface as much as 20-fold, which can destructively interfere with visible lights of wavelength lower thu 500nm. Water contact angle decreased from $54^{\circ}\;to\;14^{\circ}$ with increasing UV energy. Surface energy also increased slightly. The surface energy change was attributed to significant contribution of polar component rather than nonpolar component indicating surface photooxidation of CA film. The increased dyeability to cationic dyes in terms of both K/S and %E may be due to photochemically introduced anionic and dipolar dyeing sites on the film surfaces.

• 한국염색가공학회지
• /
• 제27권2호
• /
• pp.113-118
• /
• 2015

Poly(vinyl butyral), PVB was photooxidized by UV/ozone irradiation and the effect of UV energy on the surface properties of the UV-irradiated PVB film were investigated by the measurement of reflectance, surface roughness, contact angles, elemental composition, and zeta potential. With increasing UV energy, reflectance decreased in the visible and ultraviolet regions particularly at the wavelength of 400nm. The irradiation produced nano-scale surface roughness including the maximum peak-to-valley roughness increased from 274nm for the unirradiated PVB to 370nm at the UV energy of $5.3J/cm^2$. The improved hydrophilicity was due to the higher $O_{1s}/C_{1s}$ resulting from the introduction of polar groups such as C=O bonds. The surface energy of the PVB film increased from $35.3mJ/m^2$ to $39.3mJ/m^2$ at the irradiation of $15.9J/cm^2$. While the zeta potentials decreased proportionally with increasing UV energy, the cationic dyeability of the PVB increased accordingly resulting from the improved affinity of the irradiated PVB surfaces containing the photochemically introduced anionic and dipolar dyeing sites.

• 한국염색가공학회지
• /
• 제25권1호
• /
• pp.25-29
• /
• 2013

Poly ketone (PK) was photo-oxidized by UV/ozone irradiation and the effect of UV energy on the surface properties of the UV-irradiated PK film was investigated by the measurement of reflectance, surface roughness, contact angles, ESCA, and ATR. Reflectance, particularly at the wavelength of 380nm, decreased with increasing UV energy. And the irradiation produced nano-scale roughness on the surface uniformly. The maximum surface roughness increased from 25.3nm for the unirradiated sample to 104.9nm at the irradiation of $42.4J/cm^2$. The improvement in hydrophilicity was caused by the introduction of polar groups such as C-O and C=O bonds resulting in higher $O_{1s}/C_{1s}$. The surface energy of PK film increased from $43.3mJ/m^2$ for the unirradiated sample to $71.9mJ/m^2$ at the irradiation of $31.8J/cm^2$. The zeta potential of the UV-irradiated PK decreased with increased UV energy and the dyeability to cationic dyes increased accordingly, resulting from the photochemically introduced anionic and dipolar dyeing sites on the PK films surfaces.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2003년도 한국우주과학회보 제12권2호
• /
• pp.39-39
• /
• 2003

The plasmaspheric region shows relatively strong longitudinal asymmetry in the sense that the location of the plasmapause and the density distribution significantly vary with respect to local time, and this asymmetry effect has been neglected in previous magnetospheric ULF wave studies. In this study, we numerically examine the MHD wave properties of field line resonances (FLRs) and Pi2 pulsations when the inner magnetosphere is assumed to be asymmetric. We use the dipole magnetic field model, but our density model is based on. observational data from the IMAGE satellite. We assume an impulsive input in the magnetotail, which can be associated with a substorm onset. Our results suggest that local FLRs appear in both the radial and azimuthal oscillations owing to the asymmetry. Plasmaspheric Pi2 signals appear in the compressional component, but they are more strongly affected by ambient plasmaspheric structure than the FLRs. We compare our results with the observational data of Pi2 events.

• 폴리머
• /
• 제36권3호
• /
• pp.295-301
• /
• 2012

선형 PEG단위를 덴드리머의 중심에 갖는 덴드리머의 합성을 위한 효율적인 연결 방법이 개발되었다. 합성전략은 알카인과 아자이드기 사이의 반응을 구리(1)촉매의 존재하에서 진행하는 클릭화학을 이용하였다. 덴드리머의 핵으로 작용할 수 있는 단위체인 옥타(에틸렌글리콜)디아자이드와 도데카(에틸렌글리콜)디아자이드를 합성하였고, 이 두 화합물의 아자이드기는 덴드리머의 형성에 이용되었다. 두 디아자이드화합물을 알카인 덴드론과 클릭 반응을 통해서 덴드리머의 핵의 선형 길이가 다른 두 종류의 덴드리머 제조에 대한 수렴형 합성법을 완성하였다.

• Journal of the Optical Society of Korea
• /
• 제20권2호
• /
• pp.251-256
• /
• 2016

The prediction of thermal effects in lithography projection objective plays a significant role in the real-time dynamic compensation of thermal aberrations. For the illuminated lithography projection objective, this paper applies finite element analysis to get the temperature distribution, surface deformation and stress data. To improve the efficiency, a temperature distribution function model is proposed to use for the simulation of thermal aberrations with the help of optical analysis software CODE V. SigFit is approved integrated optomechanical analysis software with the feature of calculating OPD effects due to temperature change, and it is utilized to prove the validation of the temperature distribution function. Results show that the impact of surface deformation and stress is negligible compared with the refractive index change; astigmatisms and 4-foil aberrations dominate in the thermal aberration, about 1.7 λ and 0.45 λ. The system takes about one hour to reach thermal equilibrium and the contrast of the imaging of dense lines get worse as time goes on.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2011년도 임시총회 및 하계학술연구발표회
• /
• pp.24-24
• /
• 2011