• Title/Summary/Keyword: Dip

Search Result 1,381, Processing Time 0.022 seconds

Study of Characteristics of Seasonal Fluctuation of Water Quality and Sediment Environment in Gwangyang Bay in 2007 (2007년 광양만의 해양수질 및 저질의 계절 변동에 관한 연구)

  • Yu, Jin-Ho;Cho, Hyeon-Seo;You, Young-Seok;Park, Jeong-Chae;Kim, Yong-Ok
    • Proceedings of KOSOMES biannual meeting
    • /
    • 2008.05a
    • /
    • pp.133-136
    • /
    • 2008
  • This study was performed to characterize the seasonal variation of water quality and sediment environment from February, 2007 to October, 2007 in 21 stations of Gwangyang bay. $6.03\sim11.98mg/L$ on surface and $4.43\sim10.71mg/L$ on bottom in DO, $0.12\sim3.16mg/L$ on surface and $0.20\sim2.64mg/L$ on bottom in COD, $0.23\sim18.28{\mu}g$-at/L on surface and $0.33\sim9.56{\mu}g$-at/L on bottom in DIN, ND$\sim1.47{\mu}g$-at/L on surface and $0\sim4.56{\mu}g$-at/L on bottom in DIP. IN sediment the ranges were $2.86\sim21.17%$ in IL, $0\sim6.11mg/g$-dry in AVS and $2.64\sim23.23mg/g$-dry in COD.

  • PDF

Applying Spitz Trace Interpolation Algorithm for Seismic Data (탄성파 자료를 이용한 Spitz 보간 알고리즘의 적용)

  • Yang Jung Ah;Suh Jung-Hee
    • Geophysics and Geophysical Exploration
    • /
    • v.6 no.4
    • /
    • pp.171-179
    • /
    • 2003
  • In land and marine seismic survey, we generally set receivers with equal interval suppose that sampling interval Is too narrow. But the cost of seismic data acquisition and that of data processing are much higher, therefore we should design proper receiver interval. Spatial aliasing can be occurred on seismic data when sampling interval is too coarse. If we Process spatial aliasing data, we can not obtain a good imaging result. Trace interpolation is used to improve the quality of multichannel seismic data processing. In this study, we applied the Spitz algorithm which is widely used in seismic data processing. This algorithm works well regardless of dip information of the complex underground structure. Using prediction filter and original traces with linear event we interpolated in f-x domain. We confirm our algorithm by examining for some synthetic data and marine data. After interpolation, we could find that receiver intervals get more narrow and the number of receiver is increased. We also could see that continuity of traces is more linear than before Applying this interpolation algorithm on seismic data with spatial aliasing, we may obtain a better migration imaging.

Audiological Evaluation of Noise Induced Hearing Loss (소음성난청에 대한 청각학적 고찰)

  • 정동규;박찬일
    • Proceedings of the KOR-BRONCHOESO Conference
    • /
    • 1976.06a
    • /
    • pp.85.1-85
    • /
    • 1976
  • Audiological evaluation was performed for 184 female weavers (351 ears), who were 18~25 years old and have been working under exposure of 103~105 ㏈a of machinary noise. With the duration of employment, they were divided into five groups; under 1 year, 1~2 years, 2~3 years, 3~4 years and over 4 years. The following results were obtained: 1. The incidence ;of noise induced hearing loss was 39.7% (36.2% of ears) and rapidly increased during first 1~2 years. 2. The average maximum hearing loss on the pure tone audiograms appeared at 4,000Hz with .about 40 ㏈ of hearing level. The average hearing level at high frequencies(3,000Hz~8,000Hz) showed below 25㏈ of hearing level in all groups and had the tendency to increase slightly with the duration of working, but the most of hearing losses developed during first one year except at 8,000Hz. 3. The average hearing level at speech frequencies was within normal range but the cases of hearing level over 25 ㏈ at 2,000Hz was 27.1%. 4. The cases with maximum hearing loss at 4,000Hz were 72.7%, but the cases of maximum hearing loss at the other frequencies (3,000Hz, 6,000Hz .and 8,000Hz) were also observed and they increased slightly in numbers with the duration of working. The noise induced hearing loss under the exposure of 103~105㏈a for 5 years, seemed to develope during first 1~2 years and there after slightly .increased hearing loss was showed but no remarkable changes were observed.

  • PDF

Marine Terraces and Quaternary Faults in the Homigot and the Guryongpo, SE Korea (호미곶과 구룡포지역 해안단구와 신기지구조운동)

  • Choi, Sung-Ja
    • The Journal of the Petrological Society of Korea
    • /
    • v.25 no.3
    • /
    • pp.231-240
    • /
    • 2016
  • Three Quaternary faults have been revealed in marine terraces nearby the Homigot and the Gurongpo in the southeastern offshore of Korean Peninsula. The Hajung fault cuts the $4^{th}$ marine terraces and the Guman fault the $2^{nd}$, respectively. The Hajung fault strikes $N55^{\circ}$ to $45^{\circ}W$ and dips $40^{\circ}$ to $45^{\circ}NE$ with reverse-displacement of 180cm vertically. There are four sets of colluvial sediment strata that would be produced by faulting and indicate four times of fault movements during MIS 7 and MIS 5c. The Guman fault site consists of three sets of reverse faults that strike $N80^{\circ}E$ to $N70^{\circ}W$ and dip $25^{\circ}{\sim}35^{\circ}SE$ to $30^{\circ}SW$ with vertical displacement of 9~18 cm. The Guman faulting occurred during 80 ka (MIS 5a) to 71 ka (MIS 4) but it extends only to the lowest bed, the pebble sand bed, lay just on the unconformity, and not to the upper. Considering the attitude of the faults, we inferred that the Hajung fault was activated under the ENE-WSW compression during MIS 7 to MIS 5c and the Guman under N-S trending compression during MIS 5a. Using the OSL age dating results, we reconfirmed that the $2^{nd}$ terrace is correlated to MIS 5a and the $4^{th}$ terraces to MIS 7.

Architecture of Continental Rifting in the South Korea Plateou: Constraints to the Evolution of the Eastern Korea Margin and the Opening of the East Sea (Japan Sea)

  • Kim, Han-Joon;Jou, Hyeong-Tae;Yoo, Hai-Soo
    • Journal of the Korean Geophysical Society
    • /
    • v.9 no.3
    • /
    • pp.189-197
    • /
    • 2006
  • The Korea Plateau is a continental fragment rifted and partially segmented from the Korean Peninsulaat the initial stage of the opening of the East Sea (Japan Sea). We interpreted marine seismic profiles from the South Korea Plateau in conjunction with swath bathymetric to investigate processes of con-tjnental rifting and separation of the southwestern Japan Arc. The SouU-i Korea Plateau preserves funda-mental elements of rift architecture comprising a seaward succession of a rift basin and an uplifted rift flank passing into the slope, typical of a passive continental margin. Two distinguished rift basins (Onnuri and Bandal Basins) in the South Korea Plateau are bounded by major synthetic and smaller antithetic faults, creating wide and symmetric profiles. The large-offset border fault zones of these basins have convex dip slopes and demonstrate a zig-zag arrangement along strike. Rifting was primarily controlled by normal faulting resulting from extension orthogonal to the inferred line of breakup along the base ofthe slope rather U-ian strike-slip deformation. Two extension direcdons for rifdng are recog-nized; U-ie Onnuri Basin was rifted in U-ie EW direction; U-ie Bandal Basin in U-ie EW and NW-SE directions, suggesting two rift stages. We interpret that the E-W direction represents initial rifting at the inner margin; while the Japan Basin widened, rifting propagated repeatedly from the Japan Basin to the southeast toward the Korean margin but could not penetrate the strong continental lithosphere of the Korean Shield and changed direction to the south, resulting in E-W extension to create the rift basins at the Korean margin. The Hupo Basin to the south of the Korea Plateau is estimated to have formed in this process. The NW-SE direction probably represents the direction of rifting orthogonal to the inferred line of breakup along the base of the slope of the South Korea Plateau; after breakup the southwestern Japan Arc separated in the SE direction, indicating a response to tensional tectonics associated with the subduction of the Pacific Plate in the NE direction. We suggest that structural evolution of the eastern Korean margin can be explained by the processes occurring at the passive continental margin.

  • PDF

Effect of an Endoplasmic Reticulum Retention Signal Tagged to Human Anti-Rabies mAb SO57 on Its Expression in Arabidopsis and Plant Growth

  • Song, Ilchan;Lee, Young Koung;Kim, Jin Wook;Lee, Seung-Won;Park, Se Ra;Lee, Hae Kyung;Oh, Soyeon;Ko, Kinarm;Kim, Mi Kyung;Park, Soon Ju;Kim, Dae Heon;Kim, Moon-Soo;Kim, Do Sun;Ko, Kisung
    • Molecules and Cells
    • /
    • v.44 no.10
    • /
    • pp.770-779
    • /
    • 2021
  • Transgenic Arabidopsis thaliana expressing an anti-rabies monoclonal antibody (mAb), SO57, was obtained using Agrobacterium-mediated floral dip transformation. The endoplasmic reticulum (ER) retention signal Lys-Asp-Glu-Leu (KDEL) was tagged to the C-terminus of the anti-rabies mAb heavy chain to localize the mAb to the ER and enhance its accumulation. When the inaccurately folded proteins accumulated in the ER exceed its storage capacity, it results in stress that can affect plant development and growth. We generated T1 transformants and obtained homozygous T3 seeds from transgenic Arabidopsis to investigate the effect of KDEL on plant growth. The germination rate did not significantly differ between plants expressing mAb SO57 without KDEL (SO plant) and mAb SO57 with KDEL (SOK plant). The primary roots of SOK agar media grown plants were slightly shorter than those of SO plants. Transcriptomic analysis showed that expression of all 11 ER stress-related genes were not significantly changed in SOK plants relative to SO plants. SOK plants showed approximately three-fold higher mAb expression levels than those of SO plants. Consequently, the purified mAb amount per unit of SOK plant biomass was approximately three times higher than that of SO plants. A neutralization assay revealed that both plants exhibited efficient rapid fluorescent focus inhibition test values against the rabies virus relative to commercially available human rabies immunoglobulins. KDEL did not upregulate ER stress-related genes; therefore, the enhanced production of the mAb did not affect plant growth. Thus, KDEL fusion is recommended for enhancing mAb production in plant systems.

The Model of Appraisal Method on Authentic Records (전자기록의 진본 평가 시스템 모형 연구)

  • Kim, Ik-Han
    • The Korean Journal of Archival Studies
    • /
    • no.14
    • /
    • pp.91-117
    • /
    • 2006
  • Electronic Records need to be appraised the authenticity as well as the value itself. There has been various kinds of discussion about how records to be appraised the value of themselves, but there's little argument about how electronic records to be appraised the authenticity of themselves. Therefore this article is modeling some specific authenticity appraisal methods and showing each stages those methods should or may be applied. At the Ingest stage, integrity verification right after records creation in the organization which produced the records, quality and integrity verification about the transferred in the organization which received the records and integrity check between SIP and AIP in the organization which received and preserved the records are essential. At the Preservation stage, integrity check between same AIPs stored in different medium separately and validation of records where or not damaged and recovery damaged records are needed. At the various Processing stages, suitability evaluation after changing the record's management control meta data and changing the record's classification, integrity check after records migration and periodical validation and integrity verification about DIPs are required. For those activities, the appraisal methods including integrity verification, content consistency check, suitability evaluation about record's meta data, feasibility check of unauthorized update and physical status validation should be applied to the electronic records management process.

Comparative study on the Shape between a Customized Finger Made by 3D Printing Technology, Real Small Finger, a plaster Small Finger, Based on CT Data (CT data 기반 3D 프린팅으로 제작된 Small Finger, 실제 Small Finger 그리고 석고 Small Finger 형상 비교 연구)

  • Choi, Hyeun-Woo;An, Do-Hyun;Rhee, Do-byung;Lee, Jong-Min;Seo, Anna
    • Journal of the Korean Society of Radiology
    • /
    • v.13 no.2
    • /
    • pp.153-158
    • /
    • 2019
  • The purpose of this study is to compare and analyse the differences between a customized small finger made by 3D printing technology, a real small finger, and the other made from plaster of an orthotic company. The areas and the volumes of each cross-section were measured by Computer tomography(CT) and a 3D scanner and analysis of variance was performed to find out the differences of each shape. The areas of the point of 15.69mm, Distal Interphalangel Joints, were measured 30 times respectively using the caliper toll function of Picture Archiving Communication System(PASC) program. The volumes were measured by Configure Units of Meshmixer Program. There was no significant difference in the areas between three of them and there was 0.2 mm gap in the volume, which was more than the significance probability. Therefore, the result of this study shows the availability of finger orthoses made by 3D printing technology in the medical field.

Archaeomagnetic Study of Historic Sites in Chungcheong Region Regional Difference of Geomagnetic Field and Issues on Reliability of Data (충청지역 유적에 대한 고고지자기학적 연구 지자기의 지역적인 차이와 데이터의 신뢰도 문제를 중심으로)

  • Sung, Hyong Mi
    • Korean Journal of Heritage: History & Science
    • /
    • v.41 no.1
    • /
    • pp.21-33
    • /
    • 2008
  • In this study, the researcher examined archaeomagnetic secular variation of Chungcheong Region through measured data of archaeomagnet obtained from 34 relics, which discovered in the baked earth from varied historic sites within the region. Furthermore, the researcher closely reviewed regional differences of geomagnetic field in the domestic territory. Reviewing the comparison between the measured data of archaeomagnet in Chungcheong Region and the archaeomagnetic secular variation of Japan, which has difference in distance, it reveals a noticeable change in declination by tilting more than 10 degree toward East in the year of about A.D. 300, although the feature of whole variation is quite similar. In other period of times, it was confirmed that the regional differences of geomagnetic field in which the magnetic dip became deeper to some degree, and the declination was tilted westward a little bit. Such patterns do not differ significantly from the pattern of entire archaeomagnetic secular variation of our country, and even in the direct comparison to the data of Chungcheong Region, the distinct regional difference in both periods before and after Christian era was not confirmed. The fact may become clearer that, when the volume of the measured data of archaeomagnet increases further, and when more data connected with varied time period are filled, the problem such as deviation of the measurement period of archaeomagnet caused by the regional difference of geomagnetic field would not be worrisome issue, especially in Korean territory, judging from the measured data of archaeomagnet of historic relics in Chungcheong Region. Besides, as great efforts are being exerted in order to get the most reliable measured data as much as possible in taking both samples and measurement, it is thought that there would be no problem not only in the issue of deviation of the measurement period involving with the measured data of archeomagnet, but also in the aspect of reliability of data.

Changes in Sediment Properties Caused by a Covering of Oyster Shells Pyrolyzed at a Low Temperature (저온 소성 굴 패각의 피복에 의한 연안 오염 퇴적물의 성상 변화에 관한 연구)

  • Kim, Hyung-Chul;Woo, Hee-Eun;Jeong, Ilwon;Oh, Seok-Jin;Lee, Seong-Ho;Kim, Kyunghoi
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.25 no.1
    • /
    • pp.74-80
    • /
    • 2019
  • In this study, pyrolyzed oyster shells at a low temperature ($350^{\circ}C$) were applied for a mesocosm experiment to confirm resulting changes in the properties of sediment. After creating a covering of oyster shells, an increase in ORP and decrease in ammonia in the overlying water was observed in an experimental case. The decrease of TOC in this experiment was due to the dilution of organic matter due to the addition of inorganic matter (pyrolyzed oyster shells). The decrease in the concentration of AVS was observed due to the adsorption of AVS by the surface of the oyster shells. From the results obtained in this experiment, it has been concluded that pyrolyzed oyster shells at a low temperature can be used for remediation of polluted sediment.