• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.11
• /
• pp.17-28
• /
• 1995

In this paper, we developed a two-dimensional numerical simulator which could analyze the stripe geometry semiconductor laser diodes by modifying the commercial semiconductor device simulator, MEDICI. In order to study the characteristics of semiconductor laser diodes, it is necessary to solve the Helmholtz wave equation and photon rate equation in addition to the basic semiconductor equations. Also the recombination rates due to the spontaneous and the stimulated emissions should be included, which are very important recombination mechanisms in semiconductor laser diodes. Therefore, we included the solution routines which analyzed the Helmholtz wave equation and the photon rate equation and two important recombination rates to simulate the semiconductor laser diodes. Then we simulated the gain-guiding and index-guiding DH(Double Heterostructure) semiconductor laser diodes to verify the validity of the implemented functions. The results obtained from simulation are well consistent with the previously published ones. This allows us to know the operating characteristics of DH laser diodes and is expected to use as a tool for optimum design.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.200-205
• /
• 2000

The purpose of this study is to develop an economical radiation sensor using photo diodes. An electronic circuit was developed. The behavior of the radiation sensor was evaluated by increasing number of photo diodes. The sensor became more reliable by the increase in number of photo diodes. It was showed that the photo diodes sensor would be applicable.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.466-466
• /
• 2013

Quantum-dot materials have introduced novel applications in organic light-emitting diodes and solar cells. The size controllability and structure modifications have continuously been upgrading the applicability to optoelectronic and flat-panel displays. In particular, quantum-dot organic light-emitting diodes (QLEDs) are a device driven through the electrical field applied to the electrical diodes. The QLEDs are affected by the constituent materials and the corresponding device structures. Conventionally, the electrical properties are characterized only in terms of dc-based current-voltage characteristics. The dynamic change in light-emitting diodes should be characterized in emitted and non-emitted states. Therefore, the frequency-dependent impedance can offer different information on the electrical performance in QLED. The current work reports an auxiliary information on the electrical and optical features originating from quantum-dot organic light-emitting diodes. The empirical characterizations are discussed towards an experimental tool in optimizing the light-emitting diodes.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.11
• /
• pp.908-913
• /
• 2000

CoSi$_2$/p+/n diodes(bilayer diodes) were fabricated by using epitaxial CoSi$_2$grown from Co/Ti bilayer as a diffusion source. The I-V characteristics of p+/n diodes were measured and compared with those of diode made from Co monolayer (monolayer diode). Monolayer diodes showed typical p+n junction characteristics with the leakage current of as low as 10$^{-12}$ A and forward current 6-orders higher than the leakage current, when drive-in annealed at 90$0^{\circ}C$ for 20 sec.. On the other hand, bilayer diodes showed the Schottky-like behaviors with forward currents rather higher than those of monolyer diodes, but with too high leakage currents, when drive-in annealed at $700^{\circ}C$ or higher. However, when the annealing temperature was lowered to $700^{\circ}C$ and annealing time was increased to 60 sec., the leakage current was reduced to 10$^{-11}$ A and thus sho3wed typical diode characteristics. The high leakage currents for diodes annealed at $700^{\circ}C$ or higher was attributed to Shannon contacts formed due to unremoved Co-Ti-Si precipitates. But when annealed at 50$0^{\circ}C$, B ions diffused in the direction of the surface layer, and thus the leakage currents were reduced by removing Shannon contacts.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.600-600
• /
• 2013

We have fabricated Cr nanodot Schottky diodes utilizing AAO templates formed on n-Si substrates. Three different sizes of Cr nanodots (about 75.0, 57.6, and 35.8 nm) were obtained by controlling the height of the AAO template. Cr nanodot Schottky diodes showed a rectifying behavior with low SBHs of 0.17~0.20 eV and high ideality factors of 5.6~9.2 compared to those for the bulk diode. Also, Cr nanodot Schottky diodes with smaller diameters yield higher current densities than those with larger diameters. These electrical behaviors can be explained by both Schottky barrier height (SBH) lowering effects and enhanced tunneling current due to the nanoscale size of the Schottky contact. Also, we have fabricated Cr-Si nanorod Schottky diodes with three different lengths (130, 220, and 330 nm) by dry etching of n-Si substrate. Cr-Si nanorod Schottky diodes with longer nanorods yield higher reverse current than those with shorter nanorods due to the enhanced electric field, which is attributed to a high aspect ratio of Si nanorod.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.3
• /
• pp.39-45
• /
• 2001

The purpose of this study is to develop an economic and practical radiation sensor using photo diodes which is useful for estimating ET in greenhouse environment. An electronic circuit was then designed. Out put signal of photo diode is amplified with a LM318 transistor and is displayed in a LCD with value from zero to 255. The output signal was compared with that of a ready-made pyranometer. The behavior of the photo diode radiation sensor was evaluated by increasing number of photo diodes. The sensor became more reliable with increased number of photo diodes. Developed radiometer was tested with calibrated relation between pyranometer radiation and photo diode output. It was showed that the photo diodes radiometer would be applicable for the greenhouse environment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.7
• /
• pp.1186-1192
• /
• 2016

This paper proposes techniques to diagnose short-circuit faults of both the diodes and power FET in switching mode power supply (SMPS) by using a simple analog tester. The diodes in full-bridge rectifier, power FET, switching transformer, and some sensors are modelled with resistor. The total resistance value measured at the input terminal of a SMPS is analyzed when the short-circuit faults of diodes in a full bridge rectifier or power FET are occurred. The short-circuit faults of one or two diodes in a full bridge rectifier, power FET, and both the diodes in a full bridge rectifier and power FET can be detected by a range of total resistance, which is measured by the analog tester. Through experiments, the theoretical analysis for total resistance under short-circuit faults can be verified.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.5
• /
• pp.938-943
• /
• 2007

In this paper, we show that, in case of piezoelectric micropower generator, just replacing Schottky diodes in the bridge rectifier with ultra-low reverse leakage current diodes improves the mechanical-to-electrical energy conversion efficiency by more than 100%. Experimental and PSPICE simulation results show that, due to the ultra-low leakage current, the charging speed of the circuit employing PAD1 is higher than that of the circuit employing Schottky diodes and the saturation voltage of the circuit employing PAD1 is also higher. This study suggests that , when the internal impedance of source is very large (a few tens of $M{\Omega}$) such that maximum charging current is a few microamperes or less, in order to realize literally the energy scavenging system, ultra-low reverse leakage current diodes should be used for efficient energy conversion. Since low-level vibration is ubiquitous in the environment ranging from human movement to large infrastructures and the mechanical-to-electrical energy conversion efficiency is much more critical for use of these vibrations, we believe that the improvement in the efficiency using ultra-low leakage diodes, as found in this work, will widen greatly the application of piezoelectric micropower generator.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.2
• /
• pp.155-160
• /
• 2020

Ga₂O₃/n-type 4H-SiC heterojunction diodes were fabricated by RF magnetron sputtering. The optical properties of Ga₂O₃ and electrical properties of diodes were investigated. I-V characteristics were compared with simulation data from the Atlas software. The band gap of Ga₂O₃ was changed from 5.01 eV to 4.88 eV through oxygen annealing. The doping concentration of Ga₂O₃ was extracted from C-V characteristics. The annealed oxygen exhibited twice higher doping concentration. The annealed diodes showed improved turn-on voltage (0.99 V) and lower leakage current (3 pA). Furthermore, the oxygen-annealed diodes exhibited a temperature cross-point when temperature increased, and its ideality factor was lower than that of as-grown diodes.

• Korean Journal of Optics and Photonics
• /
• v.13 no.4
• /
• pp.319-323
• /
• 2002

1.55 ${\mu}m$multi-quantum well (MQW) broad area laser diodes with different linewidth enhancement factors ($\alpha{-factor}$) of 2 and 4 were fabricated. The far-fields of the laser diodes were measured. It was observed that the full width at half maximum (FWHM) of the far-fields and the filamentations were reduced in the laser diodes for which the value of the $\alpha{-factor}$ was small. As injection current increased, the FWHM of the far-field also increased regardless of the a-factor. This phenomenon was explained by reduction of filament spacing as injection current increased.