• 조명전기설비학회논문지
• /
• 제20권9호
• /
• pp.103-109
• /
• 2006

This research is contents about output characteristic of optic current sensor that use faraday effect. optic current sensor used in an experiment is consisted of three parts.(1) Source of light used laser diode of 1310[nm].(2) Sensor section manufactured circularly according to gas insulated switchgear. And $9/125[{\mu}m]$ standard single mode optical fiber for communication was installed winding 20 [turn] on sensor section core surroundings of diameter 31 [cm].(3) Electrical signal of PD(Photo detector) is collected using NI company's 16bit DAQ board via terminal block. Collected data analyzed by different three signal processing methods. NI company's $Labview^{TM}$ was used to signal processing software. As a result, In signal processing of optic current sensor, we could know that noise greatly more influences the error generation than fluctuation of light intensity. also, 1 class CT(current transformer) manufacture that have error rate less than 1[%] was available by removing these

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2013년도 제48차 하계학술발표논문집 21권2호
• /
• pp.381-383
• /
• 2013

This paper introduces what the interactive projection technology is, and how to use this technology to make a musical instrument. There have been many art works and business products completed by the interactive projection technology, but this technology seldom has been used in the musical field, so we want to make a simple instrument by interactive projection technology, and expect more people to develop this field in the future.

• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.203-208
• /
• 1999

By tilting the reference mirror of Twynman-Green interferometer having a reference mirror and a moving mirror, firinge pattern composed of bright and dark parallel lines can be obtained and the fringe pattern is shifted according to the displacement of the mowing mirror. Several studies are executed for displacement measurement by detecting the intensity of the fringe with photo-diodes having small detecting area. In this study, to improve the sensitivity and robustness, the intensity of fringe is detected by using a large-area quadratic photo-diode masked with a grating panel having four kinds of binary grating having phase-difference of 0, {\pi}$/4, {\pi}$/2, 3 {\pi}$/4. The phase of the fringe is calculated with a simple 4-buckets algorithm. A experimental result shows that standard deviation of 5.653 nm is obtained comparing with a capacitive type gap sensor having nearly 1 nm accuracy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.643-646
• /
• 2000

In this study, we constructed a preview-sensing visual sensor system for weld seam tracking in real time in GMA welding. A sensor part consists of a CCD camera, a band-pass filter, a diode laser system with a cylindrical lens, and a vision board for inter frame process. We used a commercialized robot system which includes a GMA welding machine. To extract the weld seam we used a inter frame process in vision board from that we could remove the noise due to the spatters and fume in the image. Since the image was very reasonable by using the inter frame process, we could use the simplest way to extract the weld seam from the image, such as first differential and central difference method. Also we used a moving average method to the successive position data of weld seam for reducing the data fluctuation. In experiment the developed robot system with visual sensor could be able to track a most popular weld seam, such as a fillet-joint, a V-groove, and a lap-joint of which weld seam include planar and height directional variation.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.160-167
• /
• 2006

In this project, we studied more accurate and reliable sensing method for oxygen in reheating furnace, made the empirical model for NOx concentration based on oxygen and evaluate the stability of the Tuneable Diode Laser (Absorption) Spectroscopy(TDL(A)S). The tested oxygen monitoring system is installed at work-field reheating furnace on hot roll at POSCO and compared with the Zr sensor system which shows too sensitive because it measures oxygen concentration on a spot unlike TDLS sensor which is successfully applied at 13m-width reheating furnace to measures the line average along the Optical Path Line(OPL).

• 한국자기학회지
• /
• 제8권6호
• /
• pp.380-387
• /
• 1998

본 논문에서는 수소($H_2$)의 주입에 따라(자기적 성질)와 strain (elastic 성질)의 변화가 최대가 될 수 있는 Fe/Zr 다층박막으로 구성된 센서재료를 개발하였다. Sputtering (RF diode) 진공 적층 시스템을 이용하여 srqurntial supttering 빙식으로 변조파장($\lambda$)이 $3{\AA}{$\leq}{\lambda}{$\leq}50{\AA}$이고 $Fe_{80}Zr_{20}$의 성분을 가진 compositionally modulated(CM)된 Fe/Zr 다층박막을 적층 시킨 후 전기분해 방법으로 수소를 주입 시켜 수소에 의해 변화된 자화 및 strain 이 최대가 되는 Fe/Zr 박박을 선택하였다. 박막 재료가 수소화된 자기적 성질의 변화는 자화 및 stain 이 최대가 되는 Fe/Zr 박막을 선태하였다. 박막 재료가 수소화된 후의 자기적 성질의 변화는 히스테리시스 graph와 vibrating sample magnetometer (VSM)를 통해, 그리고 strain 의 변화는 laser heterodyne interferometer (LHI)등으로 분서되어 졌다. 선택된 최적의 센서재료는 single-mode 광섬유를 이용한 Michelson interometer의 sensing arm에 직접 coating 되어 주입된 수소의 양을 간접적으로 측정할 수 잇는 Fiber-optic H2 gas 센서에 응용되엇다. 개발된 센서는 진단하고자 하는 구조물 내의 부식(수소화에 의한) 정도를 손쉽고, 정확하게 감지할 수 있을 것으로 기대 되므로 비파괴 검사(non-destrucive test evaluation; NDE) 응용에 사용될 수 있다.

• 센서학회지
• /
• 제10권3호
• /
• pp.163-172
• /
• 2001

넓은 지역에 걸친 침입자의 침투를 감시하기 위하여 수십 km의 광섬유 길이 전체를 감지부로 사용할 수 있는 광섬유 BOTDA (Brillouin Optical Time Domain Analysis) 센서를 개발하였다. 광섬유 BOTDA 센서는 한 개의 레이저 다이오드와 두 개의 광전 변조기(electro-optic modulator)를 사용하여 간단하게 구성하였다. 침입자에 의한 광섬유의 변형률 변화를 탐지하는 실험을 수행하기 위하여 광학테이블 위에 광섬유에 변형률을 인가하기 위한 실험장치를 설치하여 실험을 수행하였다. 이 실험으로부터 시간간격 1.5 초동안 광섬유 약 4.81 km의 길이를 거리분해능 3 m로 침입자를 탐지할 수 있음을 확인하였다.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2005년도 추계학술발표대회 논문집
• /
• pp.50-56
• /
• 2005

The robot systems are widely used in the many industrial field as well as welding manufacturing. The essential tasks to operate the welding robot are the acquisition of the position and/or shape of the parent metal. For the seam tracking or the robot tracking, many kinds of contact and non-contact sensors are used. Recently, the vision is most popular. In this paper, the development of the system which measures the shape of the welding part is described. This system uses the line-type structured laser diode and the vision sensor. It includes the correction of radial distortion which is often found in the image taken by the camera with short focal length. The Direct Linear Transformation (DLT) method is used for the camera calibration. The three dimensional shape of the parent metal is obtained after simple linear transformation. Some demos are shown to describe the performance of the developed system.

• 한국전자통신학회논문지
• /
• 제18권6호
• /
• pp.1023-1030
• /
• 2023

본 논문은 눈, 비, 안개 등 열악한 운용환경에도 강건한 표적검출 특성을 가지는 FMCW LiDAR에 대해서 기술하고 있다. 특히 FMCW LiDAR의 거리 해상도, 가간섭거리 및 최대측정거리 성능에 직접적으로 영향을 미치는 주파수변조레이저의 성능개선에 대해 기술하고 있다. 불평형 Mach-Zehnder 레이저간섭계를 활용하여, 레이저의 발진주파수의 변화율을 실시간 측정하고, 주파수변조 오차를 보정하는 광학식 위상동기루프 기술을 이용한 주파수변조 방법에 대해 기술하였다. 가간섭거리가 긴 레이저 광원을 발진하기 위해 확장공진기형 레이저다이오드를 적용하였으며, 레이저에서 발진되는 주파수 측정을 위해 광집적회로 구조의 레이저간섭계를 적용하였다. 개발된 FMCW LiDAR의 대역폭과 거리해상도는 각각 10.045GHz와 0.84mm로 측정되었다.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.64-72
• /
• 2003

This paper presents a small loading and positioning device using VCM (voice coil motor). The developed device consists of a VCM-based linear actuating system, a capacitance displacement sensor and a cantilever deflection sensing system. The trust force of the VCM proportional to applied current moves the column supported on two pairs of parallel leaf springs. The infinitesimal displacement of moved column is detected by capacitance displacement sensor with a resolution of 0.1nm and a repeatability of 1nm. Also, a micro cantilever with known stiffness (200N/m), which is mounted on the end of the column, is used as a force sensor to detect the load applied to a specimen. After the cantilever contacts with the specimen, the deflection of cantilever and the load applied to the specimen are measured by using an optical lever system which consists of a diode laser, a mirror and a PSD (position sensitive detector). In this paper, an experimental system was constructed and its actuator and sensing parts were tested and calibrated. Also, the constructed system was applied to the indentation experiment and the load-displacement curve of aluminum was obtained. Experimental results showed that the developed device can be applied for performing nano indentation.