Browse > Article

Development of Small Loading and Positioning Device using VCM  

권기환 (한양대 대학원 정밀기계공학과)
오승환 (한양대 대학원 정밀기계공학과)
조남규 (한양대 기계공학과)
윤준용 (한양대 기계공학과)
Publication Information
Journal of the Korean Society for Precision Engineering / v.20, no.12, 2003 , pp. 64-72 More about this Journal
Abstract
This paper presents a small loading and positioning device using VCM (voice coil motor). The developed device consists of a VCM-based linear actuating system, a capacitance displacement sensor and a cantilever deflection sensing system. The trust force of the VCM proportional to applied current moves the column supported on two pairs of parallel leaf springs. The infinitesimal displacement of moved column is detected by capacitance displacement sensor with a resolution of 0.1nm and a repeatability of 1nm. Also, a micro cantilever with known stiffness (200N/m), which is mounted on the end of the column, is used as a force sensor to detect the load applied to a specimen. After the cantilever contacts with the specimen, the deflection of cantilever and the load applied to the specimen are measured by using an optical lever system which consists of a diode laser, a mirror and a PSD (position sensitive detector). In this paper, an experimental system was constructed and its actuator and sensing parts were tested and calibrated. Also, the constructed system was applied to the indentation experiment and the load-displacement curve of aluminum was obtained. Experimental results showed that the developed device can be applied for performing nano indentation.
Keywords
Positioning; Voice coil; Linear actuator; Indentation;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Dargenton, J.J., Tromas, C. and Audurier, V., 'A new technology for nanohardness measurements: Principle and applications,' Surface and Coatings Technology, Volumes 100-101, Issues 1-3, pp. 103-109, 1998   DOI   ScienceOn
2 Lu, Y. and Shinozaki, D.M., 'Deep penetration micro-indentation testing of high density polyethylene,' Meterials Science and Engineering A, Vol. 249, pp. 134-144, 1998   DOI   ScienceOn
3 Wei Gao, Robert J. Hocken, John A. Patten, John Lovingood and Don A. Lucca, 'Construction and testing of a nanomachining instrument,' Precision Engineering, Vol. 24, pp. 320-328, 2000   DOI   ScienceOn
4 Tanoglu, JM., McKnight, S.H., Palmese, G.R. and GillespieJr, J.W., 'A new technique to characterize the fiber/matrix interphase properties under high strain rates,' Composites Part A: Applied Science and Manufacturing, Vol. 31, pp. 1127-1138, 2000   DOI   ScienceOn
5 Shima, T. and Fujimori, H., 'An accurate measurement of magnetostriction of thin films by using nano-indentation system,' Magnetics, IEEE Transactions, Vol. 35, pp. 3832-3834, 1999   DOI   ScienceOn
6 Chu LL. Que L. and Gianchandani YB., 'Measurements of material properties using differential capacitive strain sensors,' Journal of Microelectromechanical Systems, Vol. 11, No. 5, pp. 489-498, 2002   DOI   ScienceOn
7 Syed Asif, S.A., Wahl, K.J. and Colton, R.J., 'Nanoindentation and contact stiffness measurement using force modulation with a capacitive load-displacement transducer,' Review of Scientific Instruments, Vol. 70, No. 5, pp. 2408-2413, 1999   DOI   ScienceOn
8 Koo, J.Y. and Kim, D.H., 'Measurement of weak forces in atomic force microscopy,' J. of the KSPE, Vol. 19, No. 3, pp. 13-18, 2002   과학기술학회마을
9 Yang, S.J., Back, H.C., Kim, B.H. and Chang, I.B., 'A Study on the Performance Evaluation of a Voice Coil Actuator for Electro-Discharge Micro-Drilling Machine,' J. of the KSPE, Vol. 18, No. 12, pp.152-158   과학기술학회마을