• Journal of Industrial Technology
• /
• v.30 no.B
• /
• pp.109-112
• /
• 2010

Unlike the general lighting systems, stage lighting system requires accurate dimming control and reduction of flicker phenomenon. In this paper, we studied PWM dimming control and linear voltage level control methods. PWM Dimming is easy control and flicker phenomenon of linear voltage level dimming does not happen by experiment result. We concluded that stage lighting dimming system required to combine two techniques of the PWM and linear voltage level dimming control method.

• Journal of Convergence for Information Technology
• /
• v.8 no.5
• /
• pp.153-158
• /
• 2018

In this paper, we have studied a dimming level control method to satisfy both lighting and communication performance in visible light communication system. In the case of the most commonly used OOK and RZ-OOK modulation schemes, continuous Burst Zero Duration will seriously degrade the lighting function. This causes not only the illumination but also the performance of the entire system to deteriorate. Through this study, we analyzed the dimming level characteristics of the existing system and proposed the Illegal Pulse Insertion (IPI) algorithm as a technique to increase the dimming level. Through this, it is possible to effectively control the dimming level and improve the QoS of both lighting and communication by resolving the flicker phenomenon and dimming level reduction in the existing modulation and demodulation system.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.5
• /
• pp.127-133
• /
• 2016

In this paper, an intelligent dimming control system is designed and implemented with the human visual response function using CDS sensor, PIR sensor and temperature sensor, etc. The proposed system is designed to detect a moving object by PIR sensor and to control the LED dimming considering the human visual response. Also, the dimming of LED light can modulate on the app, and simultaneously control dimming in real-world environments with smart phone app. A high-temperature warning or a fire hazard information is transmitted to user's smart phone according to sensor values and Data graph are provided as part of data visualization. Connecting the hardware controller, the proposed intelligent smart dimming control system is expected to contribute to the power reduction interior LED, smart grid building and saving home combining with internet of things.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.640-650
• /
• 2018

A TRIAC dimmable LED driver with a wide tuning range and a two-stage uniform dimming scheme is proposed in this paper. To solve the restricted dimming range problem caused by the limited conduction ratio of TRIAC dimmers, a conduction ratio compensation technique is introduced, which can increase the output current up to the rated output current when the TRIAC dimmer turns to the maximum conduction ratio. For further optimization, a two-stage uniform dimming diagram with a rapid dimming curve and a slow dimming curve is designed to make the LED driver regulated visually uniform in the whole adjustable range of the TRIAC dimmer. The proposed control chip is fabricated in a TSMC $0.35{\mu}m$ 5V/650V CMOS/LDMOS process, and verified on a 21V/500mA circuit prototype. The test results show that, in the 90V/60Hz~132V/60Hz ac input range, the voltage linear regulation is 2.6%, the power factor is 99.5% and the efficiency is 83%. Moreover, in the dimming mode, the dimming rate is less than 1% when the maximum dimming current is 516mA and the minimum dimming current is only about 5mA.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.10
• /
• pp.16-26
• /
• 2012

This study conducted a subjective evaluation of brightness perception and visual discomfort according to dimming speeds and CCTs(Correlated Color Temperatures). Dimming speeds of two different CCT lights(2,700K, 6400K) were set to 1.7%/s, 3.3%/s, 5.0%/s, 6.7%/s, and 10.0%/s respectively. Subjects checked the time when they perceived the change of the brightness and visual discomfort. As a result, when dimming speeds were 1.7%/s, 3.3%/s, 5.0%/s, 6.7%/s, more than half of subjects responded the change of the brightness in 55.0~45.0% dimming ratios, and felt the visual discomfort in 35~25% dimming ratios. When the brightness was changed, dimming level responded to the brightness perception of hight CCT(6,400K) was higher about 8.0% then dimming level responded to the brightness perception of low CCT(2,700K). Dimming level responded to the visual discomfort of low CCT(2,700K) was higher about 5.0% then dimming level responded to the visual discomfort of hight CCT(6,400K).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.10
• /
• pp.13-20
• /
• 2010

Until now, dimmable fluorescent luminaires has been widely used for dimming systems, and LED is currently attracting attentions as a alternative lamp due to environmental problem issues. LED, one of eco-friendly high efficiency lamp, has advantage that dimming is easy than fluorescent luminaire. But there have been not enough research on technical development and application for LED dimming. Therefore, to analyze luminous quantity of dimmable LED, the illuminance, color temperature, luminance, and current were measured in the whole range of dimming. In the results of this study, the dimmable LED of various types showed a similar trend in the changed luminous quantity by dimming.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.17-23
• /
• 1999

This paper is to present a selected method of circuit parameters in the inverter part of the electronic dimming ballast fer fluorescent lamps, that is adffIuate to use with the prevailing dimming controller IC. Through the experirrent result using the prototype of the electronic dimming ballast rroduced by this rrethod, its validity is verified from the electrical and light outplt characteristics on fluorescent lamps. Also, it is feasible to rerrnte automatic and passive control for dimming electronic ballast as using a micrqrocessor, and we easily recognize the lamp condition owing to rmke a program indicate abnormal behavior for fluorescent lamp at PC screen.screen.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2280-2288
• /
• 2014

The conventional dimming control methods of LED (Light-emitting dioades) include Analog, PWM (Pulse Width Modulation), and FM (Frequency Modulation) Control. Analog dimming is controlled by adjusting forward current of Power LED. Although Analog dimming is possible to control linearly the brightness levels on a whole range (0%~100%), it comes into existence a variation of wavelength by changing the Power LED's forward current. PWM dimming has achieved by varying in duty of full current flowing to the Power LED. Generally, PWM dimming doesn't make variation of wavelength but have difficulty with adjusting the linear brightness level between 0% and 10%. FM dimming method is on the same wavelength as PWM dimming, however, it has problem of flickering at low level of dimming. This paper propose a efficient dimming control method of Power LED in order to overcome the disadvantages of the above mentioned methods. We apply to Analog method in low level of dimming control and use PWM method in dimming range from 10% to 100%. For the experiment, we design and implement a circuit and test the proposed method. Consequently, we can control the linear brightness of Power LED across the whole range and get the constant wave at different dimming level. The experimental results show the benefits of the proposed method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1156-1159
• /
• 2008

Local dimming driving has advantages in reducing power consumption and improving contrast ratio(CR). In an LED backlight unit(BLU), many small LED blocks are implemented in 2-dimmensional space, and luminance of the blocks is controlled by a local dimming algorithm. However, such a BLU can induce various recognizable artifacts. A new novel algorithm is proposed for exact block luminance calculation to correct local dimming artifacts. Also we discuss modified low-gray-level dimming to achieve much aggressive power saving in a local dimming BLU system.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.2085-2087
• /
• 1998

This paper presents the design method of a dimming electronic ballast for fluorescent lamps using a frequency control IC, and investigates the effects of circuit variables on its dimming characteristics. It is shown that effective dimming is possible with IC IR2151 for frequency control, and this leads to a feasible design of more smaller and cheaper dimming ballast. Five ballasts different in the values of the series inductance and capactance are designed, and their dimming characteristics are compared. As the result, the dimming range becomes more broader as the series inductance gets smaller and the capacitance larger. Thus appropriate selection of the values of L and C should be made according to the types of application site.