• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.507-511
• /
• 2008

LTCC (Low Temperature Co-fired Ceramic) has been successfully applied to ceramic substrates for circuits and micro-fluidic systems and has proven its superior performance in a variety of applications. The prediction of shrinkage in LTCC process is an important for dimensional control of micro LTCC products which has influences on electronic characteristics. For avoiding the unpredictable shrinkage of LTCC during the sintering which makes accurate placement of the circuit devices difficult, pre-processes such as WIP (Warm Isostatic Pressing) and lamination must be modified. The objective of the present investigation is to establish a proper WIP conditions for near net shape fabrication of LTCC products. This paper discusses the influence of WIP conditions on the dimensional change of LTCC sheet. In the investigation, it is shown that the shrinkage values of sheets depend on WIP conditions and sheet directions. This work is a quantitative evaluation of the effect of WIP pressure on shrinkage of LTCC sheet. Additionally, the results show anisotropic shrinkage behaviour of sheet during LTCC process.

• 대한인간공학회지
• /
• 제19권1호
• /
• pp.49-61
• /
• 2000

An experiment was designed to evaluate Fitts' law for the three-dimensional virtual pointing task and to compare the three input devices; Spaceball, Spacemouse, and 3D-Mouse. The result showed that Fitts law fitted poorly for the three-dimensional pointing tasks with relatively low coefficients of determinant. Three reasons, high degree-of-freedom, dynamic egocentric viewpoint change, and clutching problem were discussed to explain the poor fitness of Fitts' law. In terms of device comparison, the 3D-Mouse was superior to the other input devices. Also, the stereoscopic display significantly increased the performance. The results of this study can be used for the design of virtual control tasks and the selection of suitable input devices.

• KSBB Journal
• /
• 제16권5호
• /
• pp.493-499
• /
• 2001

2차원 형관센서를 이용하여 생물공정을 모니터링하는 기술에 관해 연구하였다. 기존의 광학센서에 비해 2차원 형광센서는 발효공저의 중요한 변수들을 동시에 모니터링하는데 사용될 수 있다. 본 연구에서는 2차원 형광센서를 이용하여 제조합 E. coli, A,. terreus 및 T. vulagis 등의 발효공정을 모니터링하고 미생물의 성장과 생성물의 생성에 대한 형광 스펙트럼의 변화를 정성적으로 비교, 고찰하였다. 2차원 형광센서는 발효공정 이외에도 생물화학반응 및 분리공정에도 쉽게 사용할수 있고 생물공정의 최적화를 도모하는데 이용될 수 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.981-992
• /
• 2004

Freeze drying under vacuum condition is a complex process that involves simultaneous heat and mass transfer, sublimation of ice, and motion of sublimation front. Proper treatment of the motion of sublimation interface is crucial for an accurate prediction of the freeze drying process. Based on the enthalpy formulation that has been successfully used in liquid/solid phase change problems. a fixed grid method. streamlined for the freeze drying analysis. was developed in this study. The accuracy of the fixed grid method was checked by solving a one-dimensional tray freeze drying and a two-dimensional vial freeze drying problem and then comparing the results with those by the moving grid method. Finally. the freeze drying characteristics of two-dimensional slab and axis-symmetric cylinder was investigated using the fixed grid method.

• Steel and Composite Structures
• /
• 제26권5호
• /
• pp.649-662
• /
• 2018

In this study, based on the three-dimensional theory of elasticity, free vibration characteristics of sandwich sectorial plates with multiwalled carbon nanotube-(MWCNT)-reinforced composite core are considered. Modified Halpin-Tsai equation is used to evaluate the Young's modulus of the MWCNT/epoxy composite samples by the incorporation of an orientation as well as an exponential shape factor in the equation. The exponential shape factor modifies the Halpin-Tsai equation from expressing a straight line to a nonlinear one in the MWCNTs wt% range considered. In this paper, free vibration of thick functionally graded sandwich annular sectorial plates with simply supported radial edges and different circular edge conditions including simply supported-clamped, clamped-clamped, and free-clamped is investigated. A semi-analytical approach composed of two-dimensional differential quadrature method and series solution are adopted to solve the equations of motion. The material properties change continuously through the core thickness of the plate, which can vary according to a power-law, exponentially, or any other formulations in this direction. This study serves as a benchmark for assessing the validity of numerical methods or two-dimensional theories used to analysis of laminated sectorial plates.

• 사물인터넷융복합논문지
• /
• 제2권1호
• /
• pp.29-33
• /
• 2016

본 논문은 '커뮤니케이션 네트워크의 입체화' 관점에서 인터넷 등장 이후 사회의 여러 커뮤니케이션 변화 현상들의 설명을 시도하였다. 특히 '커뮤니케이션 네트워크의 입체화'라는 변화가 사회의 다원화를 촉진한다는 논지를 전개해보았다. 또한 본 연구의 주제로서 입체화된 커뮤니케이션 네크워크에서 진행되는 상업적 커뮤니케이션에서 소비자 능동성 증가 현상에 대해 살펴보았다.

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.558-563
• /
• 2014

Sum-frequency generation spectra of a Langmuir monolayer on water surface at varying surface areas were studied with two-dimensional correlation analysis. Upon enlarging the area/molecule of the Langmuir monolayer, the sum-frequency spectra changed reflecting the conformation change of the alkyl chains of the molecules in the monolayer. These changes stood out more clearly by employing two-dimensional correlation analysis of the above sum-frequency spectra. Features not very pronounced in the original spectra such as closely-spaced spectral bands can also be easily distinguished in the two-dimensional correlation spectra.

• 대한치과보철학회지
• /
• 제30권3호
• /
• pp.401-410
• /
• 1992

The purpose of this study was to investigate the dimensional changes and surface morphology of dentures processed by various polymerization conditions. The measurements were done by taking radiograph and using vernier calipers and each specimen was observed on scanning electron microscope. Results obtained were as follows. 1. The difference of dimensional stability was not recognized between various polymerization conditions(heat-cured resin, pour-type resin, microwave-cured resin, and injection molding resin). 2. There were expansion and shrinkage in the occlusal dimension, shrinkage in the frontal dimension, and expansion in the lateral dimension. 3. Scanning electron microscope pictures of heat-cured resin showed dense and regular surface morphology. 4. Microwave-cured resin surface appeared more regular and smooth than pour-type resin but less dense and more irregular than heat-cured resin. 5. Scanning electron microscope pictures of pour-type resin with the lowest dimensional change showed the most irregular surface morphology.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.497-499
• /
• 2005

A portable terminal assistant market grows rapidly every year and it requires many change in research on display devices. Among many newly developing methods, OLED(Organic Light Emitting Diode) is considered an advanced flat display device because its excellent characteristics, including high speed response, full color performance, low power consumption and flux of panel. However changes in the market of display shows that the market will require 3-dimensional images, but it is hard for existing 2-dimensional displays to make 3-dimensional images. Therefore we will try to find various methods such as holograms. In this paper, we will show existing flat displays can make 3-dimensional images by applying Lenticular Screen printing techniques on the organic semiconductor display device.

• 한국수학사학회지
• /
• 제30권2호
• /
• pp.87-100
• /
• 2017

The ontological status of Newtonian space-time has been debated under the name of substantivalism-relationism controversy. The debates between the two parties are concerned with the nature of existence of space-time. Substantivalism maintains that the points of space-time have existence analogous to material substance. Relationism claims that space-time should be understood as the framework of possible spatio-temporal relations between bodies. Newtonian space is considered as a three dimensional entity in accordance with our geometric common sense. Yet given that the concept of motion is defined as the change of position throughout time, it is possible to interpret space-time as a 4 dimensional entity. In this essay, substantivalist-relationist debate is considered within the context of non-relativistic 4 dimensional space-time theory. This essay attempts to clarify the dispute over the ontology of space-time by elucidating the relationship between the ontology of space-time, motion, and space-time symmetry.