• Journal of Korean Tunnelling and Underground Space Association
• /
• v.5 no.4
• /
• pp.323-336
• /
• 2003

Recently, the development of tunnel reinforcement method has been required relating to the shallow tunnelling in soft ground. In this study, the improvement method on tunnel stability is proposed by evaluating the efficiency of face reinforcement which enables to control extrusion of advance core, however, it is often neglected in urban tunnelling under the poor ground conditions. Systematic pre-confinement ahead of the face improves the tunnel stability, subsequently, displacement of the crown and surface settlement can be restrained by proper method. 3-dimensional numerical analysis including horizontal reinforcement modelling on a face is applied to estimate the behaviour of a tunnel in relation to the ground and reinforcement conditions. Consequently, extrusion at the face decreases significantly after using the horizontal reinforcement and the effect of reinforcement is much increased in case of applying the supplemental reinforcement ahead of the face together. Especially, confinement effect around the tunnel and the core is proved by means of the core reinforcement in poor ground conditions.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.147-152
• /
• 2016

Wireless sensor networks that are easy to deploy and install are ideal for building a system that monitors the condition of the equipment in a factory environment where wiring is difficult. The ZigBee has characteristics of low price and low power compared with other wireless communication protocols and is suitable for a monitoring system requiring a plurality of nodes. ZigBee communication requires encryption security between devices because all protocol layers are based on OTM trusted by each other. In the communication between nodes, node authentication must be guaranteed and exposure of confidential information managed by each node should be minimized. The facilities of the factory are regular and stationary in distribution location. In order to protect the information gathered from the sensor in the factory environment and the actuator control information connected to the sensor node, we propose a cryptosystem based on the two - dimensional grid - based key distribution method similar to the distribution environment of the facility.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.252-261
• /
• 1991

A particle trajectory model to simulate two-phase particle-laden crossjets into two-dimensional horizontal free stream has been developed to study the variations of the jet trajectories and velocity variations of the gaseous and the particulate phases. The following conclusions may be drawn from the predicted results, which are in agreement with experimental observations. The penetration of the two-phase jet in a crossflow is greater than that of the single-phase jet. The penetration of particles into the free stream increases with increasing particle size, solids-gas loading ratio and carrier gas to free stream velocity ratio at the jet exit. When the particle size is large, the solid particles separate from the carrier gas , while the particles are completely suspended in the carrier gas for the case of small size particles. As the particle to carrier gas velocity ratio at the jet exit is less than unity, the particles in the vicinity of the jet exit are accelerated by the carrier gas. As the injection angle is increased, the difference of the particle trajectory from that of the pure gas becomes larger. Therefore, it can be concluded that the velocities and trajectories of the particle-laden jets in a crossflow change depending on the solids-gas loading ratio, particle size, carrier gas to free stream velocity ratio and particle to gas velocity ratio at the jet exit.

• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.21-29
• /
• 2003

Recent developments in software technology have made it possible to create a virtual three-dimensional model of the dental arches from digitally scanned casts of a patient's dentition. This modelmay then be manipulated with software to produce stages of tooth movement from the initial malocclusion to the final desired occlusion. A sterolithograghic model is made for each stage of tooth movement which is the basis for construction of a series of clear and thin overlay appliances. These appliances are worn full time by the patient to move the teeth according to the programmed stages of movement. Malocclusions involving mild to moderate crowding and space closure have been proven to be successfully treated with this appliance. Experience with this appliance has demonstrated excellent patient compliance with less discomfort, improved esthetics and oral hygiene control, when compared with fixed orthodontic appliances. Orthodontic treatment with this appliance is a potentially useful alternative approach to fixed appliances for treatment of a variety of malocclusions in patients with fully erupted permanent teeth.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.6
• /
• pp.860-873
• /
• 1998

In a low speed open-type wind tunnel, a group of parallel wakes downstream of two dimensional grid model consisting of several circular cylinders were experimentally investigated to study the response of the wake flows to the acoustic excitation, in hoping to promote the understanding of the underlying mechanism behind the gross flow change due to artificial excitation. In the unexcited wake flows, the development of the individual wakes behind cylinders was almost uniform for the ratio of the spacing to the cylinder diameter of s/d.geq.1.5. For smaller s/d, however, the jet streams issued through the gaps between the cylinders became biased in one side and the cylinders had wakes of different sizes. At s/d=1.25, the gap flow directions change in time, leading to unstable wake patterns. Further reduction in s/d made this unstable flip-flopping of the jets stable. The most effective excitation frequency was found to be in the Strouhal number range of St=0.5-0.6. This frequency was related to the vortex shedding. At s/d=1.75, the excitation frequency was 2 or 4 times the vortex shedding frequency. When the flow was excited at this frequency, the vortex sheddings were energized, and pairings between neighboring vortices were generated. Also, the merging process between individual wakes was accelerated. The unstable and unbalanced wake patterns at s/d=2.15 were made stable and balanced. The unstable and unbalanced wake patterns at s/d=2.15 were made stable and balanced. For smaller spacing of s/d .leq,1.0, the acoustic excitation became less effective in controlling the flow.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.2
• /
• pp.288-297
• /
• 2000

This paper describes the results of an experimental investigation of the flow characteristics and the heat transfer rate on a surface by interaction of a pair of vortices. The test facility consists of a boundary-layer wind tunnel with a vortex introduced into the flow by half-delta wings(vortex generators) protruding from the surface. In order to control the strength of the two longitudinal vortices, the angles of attack of the vortex generators are varied from 20 degree to 45 degree, but spacings between the vortex generators are fixed to 4 cm. The 3-dimensional mean velocity downstream of the vortex generators is measured by a five-hole pressure probe, and the hue-capturing method using the thermochromatic liquid crystals has been used to provide the local distribution of the heat transfer coefficient. By using the method mentioned above, the following conclusions are obtained from the present experiment. The boundary layer is thinned in the regions where the secondary flow is directed toward the wall and thickened where it is directed away from the wall. The peak augmentation of the local heat transfer coefficient occurs in the downwash region near the point of minimum boundary-layer thickness. Streamwise distributions of averaged Stanton number on the measurement planes show very similar trends for all the cases(${\beta}=20^{circ},\;30^{\circ}\;and\;45^{\circ}$).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.2
• /
• pp.298-305
• /
• 2000

The flow characteristics and the heat transfer rate on a surface by interaction of a pair of vortices were studied experimentally. The test facility consisted of a boundary-layer wind tunnel with a vortex introduced into the flow by half-delta wings protruding from the surface. In order to control the strength of the longitudinal vortices, the angles of attack of the vortex generators were varied from - 20 degree to - 45 degree, but spacings between the vortex generators were fixed to 4 cm. The 3-dimensional mean velocity measurements were made using a five-hole pressure probe. Heat transfer measurements were made using the thermochromatic liquid to provide the local distribution of the heat transfer coefficient. Unlike common flow down, common flow up vortices moved toward the centerline as they developed and interacted strongly with each other but not with the boundary layer. Spanwise profiles of Stanton number were similar for ${\beta}=-20^{\circ}\;and\;-35^{\circ}$, but not similar for ${\beta}=-45^{\circ}$. The case of ${\beta}=-20^{\circ}\;and\;-35^{\circ}$ showed the two peak Stanton number, but the case of ${\beta}=-45^{\circ}$ showed the only one peak Stanton number.

• BMB Reports
• /
• v.43 no.5
• /
• pp.337-343
• /
• 2010

Fenofibrate, an agonist of $PPAR{\alpha}$, plays an important role in activating many proteins catalyzing lipid metabolism, and it also has a considerable effect on improvement of insulin sensitivity in the diabetic condition. To investigate fenofibrate-dependent expression of peripheral tissue proteins in diabetes, we analyzed whole muscle or fat proteins of fenofibrate-fed OLETF rats, an animal model of type II diabetes, using 2-dimensional gel electrophoresis. We found that many proteins were specifically expressed in a fenofibrate-dependent manner in these diabetic rats. In particular, a functionally unknown C11orf59 protein was differentially expressed in the muscle tissues (about 5-fold increase) in fenofibrate-fed OLETF rats as compared to control rats. Additionally, the signal proteins phosphatidylethanolamine binding protein and IkB interacting protein were differentially regulated in the fenofibrate-treated adipose tissues. We suggest here that these proteins might be involved in controlling lipid or carbohydrate metabolism in diabetes via $PPAR{\alpha}$ activation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.387-388
• /
• 2010

An open water rudder test was carried out to figure out the flow characteristics around a twin rudder at $Re=1.5\times10^4$. In the analysis, the unique characteristics of a twin rudder, which effects rudder farces, were explained. The analysis is included varying angles of attack fram 10 to 30 degree. In this paper, the measured results has been compared with each other to predict the performance characteristics of a twin rudder's 2-dimensional section by 2-frame grey level cross correlation PIV method. The side force of the rudder could be mainly improved at 0.75L.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.1 s.5
• /
• pp.55-66
• /
• 1995

Most studies using satellite images have been performed to determine three dimensional positioning by stereoscopic analysis for stereo-pair or to extract digital elevation model by stereo matching using image correlation techniques. Because the small errors on the ground control points have a great impact on the results, however, it is hard to get reliable products when we analyze satellite orbital parameters or acquire digital elevation model by using only stereo-pair. Also, if there are noises, shadows, or clouds on the one of stereo pair, it is difficult to produce DEM(digital elevation model) on the area under analysis or to have good accuracy. In these case, it can be solved by systematic analysis of the multiple stereo images. This paper suggests the improvements on the accuracy of the digital elevation model by the developments of stereoscopic analysis techniques for the triplet of SPOT satellite images on the same area.