• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.4
• /
• pp.802-809
• /
• 2008

Gamijangsing-tang (GMJST) has been used for treatment of bone formation in traditional korean medicine. The purpose of this study is to examine effects of GMJST on bone metabolism. The effects on the osteoblasts were determined by measuring (1) cell proliferation, (2) alkaline phosphatase (ALP) activity, (3) osteoprotegerin (OPG) secretion. (4) The morphologic changes of cells were observed by light microscopy and electron microscopy. Mineralization of calcium was determined by quantitative alizarin red-S assay and mineralization of phosphate was observed by von kossa staining. The morphologic changes of mineralization on the cells were observed by transmission electron microscopy (TEM). The effects on the osteoclast were investigated by tartrate-resistant acid phosphatase (TRAP) staining. Following results were obtained: Celluar activity of osteoblastic cells (MG-63) was significantly increased in 10-5 of dilution of GMJST. ALP and OPG activity of osteoblastic cells were increased in GMJST than normal MG-63 cell. Mineralization of osteoblastic cells were increased in GMJST than normal MG-63 cell. The activity of osteoclast cells (RAW 264.7) was significantly decreased in GMJST than normal MG-63 cell. From the results, GMJST stimulated the proliferation and mineralization of bone-forming osteoblast and inhibited by bone- lysis osteoclast.

• The Korean Journal of Mycology
• /
• v.18 no.2
• /
• pp.77-83
• /
• 1990

Factors influencing the fusion frequency of protoplasts were investigated with auxotrophic mutants of Pleurotus florida and Pleurotus ostreatus. Immediately after the polyethylene glycol (PEG) solution was added, the protoplasts adhered firmly and shrank. During the subsequent dilution with 0.6 M sucrose, the protoplasts regained their normal size and larger bodies were observed. Interspecific heterokaryons were obtained by fusion of the nutritionally complementing protoplasts. Hyphae of the heterokaryotic fusants formed true clamp connections. The optimum conditions were a total of 1 to 15 million protoplasts per ml, 30% polyethylene glycol 8000 solution with adjustment to pH 8.0 and 0.6 M sucrose stabilized regeneration medium. Other parameters such as $CA^{++}$, glycine, exposure time and temperature influenced mainly the viability of the protoplasts.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.2
• /
• pp.89-99
• /
• 1984

Engineering properties of soils is studied by permeating injection of water-glass chemical grout by use of a large sized grouting equipment of 1.5 shot system. Furthermore, the effectiveness of chemical groutinig by taking water-glass chemical grout combined with portland-cement for the purpose of improving the soil strength is confirmed. Relationships between main factors which cause the effectiveness of chemical grouting are described, and the factors are velocity and temperature of flowing water; grain size distribution and density of soils; density, viscosity, gel time and volume of grouts; injection pressure and grouting process. Improvement of the effectiveness of chemical grouting in flowing water by preventing the dilution and flowing down of grouts is investigated. Moreover, local shear failures and upheaval phenomena of ground are also investigated by field measurement.

• Korean Journal of Animal Reproduction
• /
• v.14 no.4
• /
• pp.245-252
• /
• 1990

This study was carried out to investigate the factors affecting fertilization in vitro of follicular oocytes with frozen-thawed spermatozoa in Korean Native Cattle. The bovine ovaries were obtained at a slaughter house and the follicular oocytes were recovered by aspirating the follicular fluid from the visible follicles of 3~6mm. The bovine oocytes were matured in vitro for 20~24 hours in TCM-199 containing FCS and hormones. The matured oocytes were fertilized in vitro using Percoll-separated frozen-thawed spermatozoa in BO solution. The effects of dilution and fertilization media, capacitating method, concentration of inseminated sperm and time after insemination of fertilization, were observed. The results obtained are summarized as follows : 1. The fertilization rate of frozen-thawed sperm inseminated in BO solution with caffeine and heparin together(56.4%) was higher than that of sperm inseminated in BO solution with either caffeine(10.5%) or heparin(8.9%) and without both caffeine and heparin(0%)(P<0.05). 2. The fertilization rate(56.3%) of frozen-thawed sperm inseminated in BO solution with both caffeine and heparin without preincubation was higher than that of sperm preincubated(2.9%)(P<0.05). 3. The fertilization with high concentration of frozen-thawed sperm(1.4~1.8$\times$107cells/ml) in BO solution containing caffeine and heparin resulted in higher fertilization rate, 76.7%, than the low concentration of sperm(0.8~1.0$\times$107cells/ml), 32.7%(P<0.01). 4. When the oocytes were inseminated with frozen-thawed sperm in BO solution containing caffeine and heparin without preincubation, fertilization rate increased by time and the rates were 5.9, 46.0 and 59.4% at 8, 16 and 24 hours, respectively.

• Journal of Hydrogen and New Energy
• /
• v.35 no.3
• /
• pp.324-335
• /
• 2024

The container package type sealed water electrolysis production system installs mechanical balance of plant and electrical balance of plant as an integrated unit to enable independent operation within the package module. The auxiliary equipment required to operate the water electrolysis system must be integrated to reduce the installation area and shorten the installation time. At this time, as leak risk factors are placed in a dense space, when a hydrogen gas leak accident occurs, it can have a mutual influence on other adjacent facilities, so it contains various risk factors. In this study, when a gas leak occurs in a container packaged water electrolysis system, possible sources of leakage in the system according to the KS C IEC 60079-10-1:2015 and KGS GC101 standards were identified, and the leak rate and leak characteristics were calculated. did. The hazardous area and its range were calculated according to ventilation and dilution characteristics. In order to optimize ventilation characteristics, design of experiment was used to analyze the influence to evaluate the adequacy of ventilation, and overseas ventilation standards were analyzed and compared. In addition, the optimal ventilation structure and characteristics of the container packaged water electrolysis system were presented according to the results of the experimental design method.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1621-1621
• /
• 2001

The quality of sugarcane grown on the NE Australian tropical coast ($16^{\circ}$15'- $18^{\circ}$15' S Lat.) has declined markedly in the past seven years. This has been linked to dilution of mill-supply cane with increasing levels of non mature-stalk material consisting of leaves and sucker culms. The prime research objective was to examine the transition from the pre-harvest, in-field crop to harvested material sent for processing, in terms of quality and crop fraction proportions. A secondary objective was to quantify the effects of preharvest-season crop habit and culm condition on crop quality. Ten quadrat samples from each of 54 random crop sites (17 in 1999 and 37 in 2000), covering a wide range of variables (cultivar, crop class, and edaphic, topographic, climatic, and temporal factors) were collected immediately before harvest. Samples were partitioned into four fractions:- sound and unsound mature stalks (culms), sucker culms, and extraneous matter (leaves). Material harvested from each site was sampled and partitioned into four fractions:- sound and unsound billets (culm pieces), culm-spindle pieces, and leaf. In 2000, before harvest, 14 additional sites were sampled monthly, on three occasions, from March - June. Erect and non-erect culms were divided into sound and unsound classes. All samples were disintegrated and presented to a remote reflectance module of a scanning spectrophotometer using the BSES large cassette module. Near infra-red spectroscopic (NIS) analyses were developed for the rapid determination of quality components (Brix, commercial cane sugar (CCS), fibre, moisture, and polariscope reading). Calibrations for three material groups (culm (n = 639), non-culm (n = 496), and combined) were developed for all components using the 1999 data set. Two sub-sets (n = 178, and 190) of about 10% of the preharvest-season and harvest populations scanned in 2000 also were subjected to full routine laboratory analyses. The 1999 combined calibrations were excellent, but the culm calibrations produced consistently lower standard errors. Non-culm calibrations were marginally better than the combined for only CCS and pol. reading. Analysis of the 2000 culm data with calibrations using all 1999 and 2000 culm data resulted in better predictions relative to the 1999 culm calibrations. This also was true for the combined calibrations. Assessment of quality components in pre- and post-harvest sugarcane using NIS calibrations was more cost effective than using routine laboratory techniques. Outcomes from this NIS-facilitated research will have important economic consequences for the Australian sugarcane industry. Potential CCS present in mature culms is being discounted by dilution with leaves and sucker culms, threatening farm viability. The results question the efficacy of current harvesting technology. The CCS of harvested cane is improved only marginally over that of the in-field crop. Current harvesting technology requires either supplementary, innovative pre-mill processing or a design revolution to improve mill-supply cane quality, and therefore whole of industry economics. NIS-facilitated analyses, before the harvest season, highlighted the benefits of growing erect, sound crops. Loss of CCS then, can be minimized only by a combination of crop improvement and agronomic solutions, applied as part of sound on-farm management.

• Korean Journal of Animal Reproduction
• /
• v.23 no.3
• /
• pp.257-262
• /
• 1999

This study was carried out to evaluate the effect of pH and storage temperature on the viability of boar sperm diluted with extender KpA for swine artificial insemination. The results obtained in this experiment were summarized as follows : 1. The viability of boar sperm diluted with KpA was higher than that with BTS during storage and especially more than 60% of sperm viability in KpA was maintained through 6 days. The pH values of all extenders were kept during storage of semens following dilution. 2. The sperm diluted with acidic (pH 6.3~6.8) or alkalic (pH 7.8~8.0) KpA and stored at 4$^{\circ}C$ or 37$^{\circ}C$ were more sensitive in viability than that with neutral pH (6.8~7.3) and at 17$^{\circ}C$ storage. But pH values of all conditions were not increased rapidly. Especially acidic and alkalic diluents were more stable in pH after dilution. Conclusively, extender pH and storage temperature was the important factors for sperm viability. The KpA setting up around neutral pH was the optimal boar semen extender for maintaining liquid semen at 17$^{\circ}C$.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.1
• /
• pp.55-60
• /
• 2011

In this study, DOPC liposomes were prepared with distilled water, phosphate buffer and phosphate buffered saline to evaluate the effects of salt on the stability of DOPC liposome. The changes in physical properties (likeparticle size and zeta potential) of liposome were measured after adding the salt. Liposomes were diluted 40 times and 80 times with hydration solvent to confirm the effect of dilution. Consequently, the stability of liposome was maintained up to 40 times dilution with hydration solvent. The liposome that prepared with distilled water was diluted with distilled water, phosphate buffer and phosphate buffered saline, and the liposome that prepared with phosphate buffer was diluted with phosphate buffer and phosphate buffered saline to evaluate the salt-induced changes in particle size and zeta potentia. As results, the particle size increased slightly and zeta potential became closer to 0 when the salt concentration was increased. In conclusion, particle size and zeta potential of liposome could be reasonable factors to evaluate the stability of liposome. In addition, we suggest that salt concentration of hydration solvent has a significant effect on the stability of liposome.

• Korean Journal of Food Science and Technology
• /
• v.39 no.4
• /
• pp.366-371
• /
• 2007

The volatile components in Eoyuk-jang, a traditional Korean fermented food, were isolated using solvent extraction, and analyzed by gas chromatography-mass spectrometry (GC-MS). A total of 36 components, including 11 aliphatic hydrocarbons, 4 acids, 2 ketones, 5 phenols, 7 alcohols, 1 pyrazines, 4 pyrones and furanones, and 2 miscellaneous components, were found in Eoyuk-jang; among them, butanoic acid was quantitatively dominant. In addition, the aroma-active compounds were determined by gas chromatography-olfactometry (GC-O) using aroma extract dilution analysis (AEDA). A total of 20 aroma-active compounds were detected by GC-O. Butanoic acid (rancid) and methional (cooked potato-like) were the most potent aroma-active compounds with the highest FD factors $(Log_3$, FD), followed by 2-methyl-2-butanol (soysauce-like), 3-hydroxy-2-butanone (buttery), and 2-furanmethanol (burnt sugar-like).

• Economic and Environmental Geology
• /
• v.41 no.4
• /
• pp.383-392
• /
• 2008

This study aims to evaluate the mechanical-chemical stability of used coal ash blocks, for improving fishing grounds. The surface of weathered ash blocks in seawater showed a decrease in the Ca and an increase in the Mg contents, compared to that of fresh blocks. This result reflects the substitution of Ca by Mg in seawater. The compressive strengths of ash blocks submerged into seawater during 12 months ranged from 235.23 to $447.43\;kgf/cm^2$; this is higher than the standard strength of wave-absorbing blocks($180\;kgf/cm^2)$ that are used for harbor construction. In addition, the compressive strength of ash blocks tends to increase with increasing installation time in seawater. The result of leaching experiments on coal ash blocks by Korean Standard Leaching Test(KSLT) method showed that leached concentrations of most metals except Cr(that leached up to 50 ppb, approaching standard concentration) do not exceed the seawater quality standards. A long-term(112 days) heavy metal leaching test to analyze seawater without mixing-dilution also showed that the concentrations of leached heavy metals, except for Cu, under anaerobic conditions do not exceed the seawater quality standards. Accordingly, the use of coal ash blocks in marine environments appears to be safe from chemical and mechanical factors that decrease the efficiency of concrete. Also, leaching concentration of Cu seems to be stable by decrease of leaching concentration due to dilution of seawater.