• E2M - 전기 전자와 첨단 소재
• /
• 제2권2호
• /
• pp.103-108
• /
• 1989

새로운 전도성물질 중간체 합성기술의 기초연구의 일환으로 N, N-dialkylbenzamide를 ether 용액에서 lithiation 및 carboxylation시킨 결과, 저온 (-78.deg.~-20.deg.), 짧은 반응 시간에서는 방향족 고리 Ortho-위치에 carboxylation이 일어났고 상대적 고온 (0.deg.이상)에서는 아미드의 카보닐에 치환된 ketone이 얻어졌다. 이는 온도 조건에 따라 두 반응이 상호 경쟁적으로 진행되기 때문이라고 사료된다.

• Toxicological Research
• /
• 제34권2호
• /
• pp.111-125
• /
• 2018

Solvents can be used in the manufacture of medicinal products provided their residual levels in the final product comply with the acceptable limits based on safety data. At worldwide level, these limits are set by the "Guideline Q3C (R6) on impurities: guideline for residual solvents" issued by the ICH. Diisopropyl ether (DIPE) is a widely used solvent but the possibility of using it in the pharmaceutical manufacture is uncertain because the ICH Q3C guideline includes it in the group of solvents for which "no adequate toxicological data on which to base a Permitted Daily Exposure (PDE) was found". We performed a risk assessment of DIPE based on available toxicological data, after carefully assessing their reliability using the Klimisch score approach. We found sufficiently reliable studies investigating subchronic, developmental, neurological toxicity and carcinogenicity in rats and genotoxicity in vitro. Recent studies also investigated a wide array of toxic effects of gasoline/DIPE mixtures as compared to gasoline alone, thus allowing identifying the effects of DIPE itself. These data allowed a comprehensive toxicological evaluation of DIPE. The main target organs of DIPE toxicity were liver and kidney. DIPE was not teratogen and had no genotoxic effects, either in vitro or in vivo. However, it appeared to increase the number of malignant tumors in rats. Therefore, DIPE could be considered as a non-genotoxic animal carcinogen and a PDE of 0.98 mg/day was calculated based on the lowest No Observed Effect Level (NOEL) value of $356mg/m^3$ (corresponding to 49 mg/kg/day) for maternal toxicity in developmental rat toxicity study. In a worst-case scenario, using an exceedingly high daily dose of 10 g/day, allowed DIPE concentration in pharmaceutical substances would be 98 ppm, which is in the range of concentration limits for ICH Q3C guideline class 2 solvents. This result might be considered for regulatory decisions.

• Korean Chemical Engineering Research
• /
• 제58권3호
• /
• pp.498-498
• /
• 2020

• Korean Chemical Engineering Research
• /
• 제58권2호
• /
• pp.257-265
• /
• 2020

Densities (ρ) for binary mixtures of ethanol (1) + diisopropyl ether (DIPE) or cyclohexane or alkane (C₆-C₉) (2) were measured at 298.15 K, 308.15 K and 318.15 K. The excess molar volume (V^E_m) of binary mixtures was calculated using ρ data and correlated with Redlich-Kister polynomial equation. The V^E_m values for binary mixtures of ethanol (1) + cyclohexane or n-alkane (C₆-C₉) (2) were positive, whereas for ethanol (1) + DIPE (2) these were negative. The magnitude of V^E_m values follows the order: cyclohexane > n-nonane > n-octane > n-heptane > n-hexane > DIPE. The V^E_m values have been interpreted qualitatively and also quantitatively in terms of Flory-Treszczanowicz-Benson (FTB) model and Prigogine-Flory-Patterson (PFP) theory. The values V^E_m predicted using FTB model agree well with experimental V^E_m values at all mole fractions. But the PFP theory describes well V^E_m data in ethanol-rich region (x₁ > 0.5) for all binary mixtures and is able to predict the sign of V^E_m vs x₁ curve for ethanol-lean region (x₁ < 0.5) except for ethanol (1) + nonane (2) mixtures.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2002년도 생물공학의 동향 (X)
• /
• pp.165-168
• /
• 2002

TLC(Thin Layer Chromatography) 는 제약산업이나 생화학 연구 그리고 여러 산업 현장에서 널리 이용되는 화학 분석 방법이다 . 본 연구에서는 적은 비용으로도 많은 양의 시료를 신속하게 분리할 수 있는 TLC를 이용하여 유기산인 젖산 (Lactic acid) 을 분리는 전개방법을 개발하였다 . 전개용매는 2 가지 용매 (1) nitroethane nitromethane : ethanol: water: I-propanol = 1 : 2 : 3 : 4 : 5 (v/v/v/v/v), (2) diisopropyl ether. formic acid. water = 90 : 7 : 3 (v/v/v) 를 사용하였다 . 발색시약은 A : bromocresol purple reagent I, B . bromocresol purple reagent II, C : bromocresol green-bromophenol blue-potassium permanganate reagent 를 사용하여 분석하는 방법을 개발하였다 $^6)$. 젖산의 분리는 silica gel TLC plate를 이용하는 경우 , 용매 (1) 에 발색시약 B를 사용했을 때 , 분리 확인이 가장 좋았다.