• 제목/요약/키워드: Digital-IF

검색결과 2,200건 처리시간 0.031초

멀티밴드 W-CDMA를 위한 SDR 기반의 디지털 IF 모듈구현

  • 이원철
    • 전자공학회지
    • /
    • 제30권4호
    • /
    • pp.76-88
    • /
    • 2003
  • 본 논문에서는 기존의 기지국과 W-CDMA 시스템을 상호 연동하기 위한 SDR(Software Defined Radio) 기반의 멀티 밴드 디지털 IF 모듈 구현에 대해 소개한다. 하드웨어 플랫폼상에 테스트 및 시험 검증하기 위해서 크게 광대역 ADC, DAC, FPGA로 구성하였으며, FPGA 내에 디지털 필터 및 NCO등의 응용 소프트웨어는 VHDL로 코딩하였다. 디지털 필터는 FPGA의 허용 자원을 고려하여 인터폴레이션 및 데시메이션을 위한 폴리페이즈 필터 뱅크로 구현하였다. 또한 송신단에서는 이미지 성분을 제거하기 위해 2단의 DCQM(Digital Complex Quadrature Modulation)을 적용하였으며, 이때 적용되는 NCO (Numerically Controlled Oscillator)는 1/4주기의 LUT를 사용하여 설계하였다. 수신단에서는 IF 단에 SAW필터를 사용하지 않기 때문에 W-CDMA의 블록커 규약에 준하면서 근접 채널을 제거하기 위한 고출력의 감쇄 특성을 갖는 필터를 설계하였다. 본 논문에서는 컴퓨터 시뮬레이션 결과와 스펙트럼 분석기를 통해 측정된 결과를 비교 분석하였으며 이에 대한 디지털 IF 모듈의 성능을 검증하였다.

  • PDF

판정궤환이 있는 복소 LMS 퍼지 적응 등화기 (Complex LMS Fuzzy Adaptive Equalizer with Decision Feedback)

  • 이상연;김재범;이기용;이충웅
    • 한국통신학회논문지
    • /
    • 제21권10호
    • /
    • pp.2579-2585
    • /
    • 1996
  • In this paper, a complex fuzzy adaptive decision feedback equalizer(CFADFE) based on the LMS algorithm is proposed. The propoed equalizer is based on the complex fuzzy adaptive equalizer. The CFADFE isconstructed from a set of changeable complex fuzzy IF-THEN rules, where the 'IF' part of the rule is characterized by the state from a set of changealble complex fuzzy IF-THEN rules, where the 'IF' part of the rule is characterized by the state of the desision feedback. the role of decision feedback is to reduce the computational complexity. Computer simulation of the decision feedback. The role of decision feedback is to reduce the computational complexity. Computer simulation shosw that the CFADFE notonly reduces the computational complexity but also improves the performance compared with the conventional complex fuzzy adaptive equalizers. We also show that the adaptation speed is greatly improved by incorporating some linguistic information about the channel into the equalzer. It is applied to M-ary QAM digital communication system with linear and nonlinear complex channel characteristics.

  • PDF

디지털 증거 선별 조사의 효율성을 위한 Digital Evidence Container 설계 및 구현 (A New Design and Implementation of Digital Evidence Container for Triage and Effective Investigation)

  • 임경수;이창훈;이상진
    • 전자공학회논문지CI
    • /
    • 제49권4호
    • /
    • pp.31-41
    • /
    • 2012
  • 최근 국내외 수사 기관은 초동 수사 시 현장에 컴퓨터가 있을 경우, 사이버 범죄 수사가 아닌 경우에도 시스템을 압수 또는 확보하는 것이 필수적인 단계로 자리 잡고 있다. 이렇게 확보한 시스템으로부터 용의자의 범죄 사실 입증을 위한 정황 증거를 확보하여 수사에 활용되고 있다. 하지만 사이버 범죄가 아닌 일반 범죄 사건에서 확보한 시스템에서 디스크 이미지를 확보한 후, 면밀히 조사하는 것은 시간이 많이 소요되며 신속한 사건 대응이 필요한 납치, 살인사건과 같은 범죄 유형에는 더욱 어려움이 따른다. 또한 기업 수사에서도 대용량 데이터베이스나 파일 서버 조사에서 나아가 클라우드 환경에서는 디스크 단위의 복제는 불가능하므로 선별 수집한 디지털 증거를 분석에 이용해야 한다. 하지만 다양한 종류의 디지털 증거를 선별 수집하더라도 이를 저장 및 보관하기 위한 표준화된 데이터 포맷이 존재하지 않아 법정에서 증거력을 증명하기 어려운 것이 현실이다. 따라서 본 논문에서는 선별 수집된 다양한 디지털 증거를 보관하기 위한 새로운 증거 보관 포맷을 제시한다. 본문에서 제시하는 디지털 증거 포맷은 다양한 디지털 증거 자료에 활용할 수 있도록 범용성과 확장성에 중심을 두었으며, 일반적인 XML 기술과 압축 파일 포맷을 이용하여 기존 시스템에 적용하기 쉽도록 설계하여 기존 연구들보다 활용하기 쉬운 장점이 있다.

HPA 비선형 특성을 고려한 SSD(Simultaneous Single Band Duplex) 시스템의 설계와 성능 분석 (Design and Performance Evaluation of SSD (Simultaneous Single Band Duplex) System with HPA Nonlinearity)

  • 금홍식;안창영;유홍균
    • 한국통신학회논문지
    • /
    • 제40권1호
    • /
    • pp.23-31
    • /
    • 2015
  • 본 논문에서는 RF Cancellation과 Digital Cancellation을 사용하는 SSD(simultaneous single band duplex) 시스템을 설계하고 여기에서 HPA의 비선형 특성이 고려될 경우의 자기 간섭 신호 제거 성능 및 시스템의 전체적인 성능을 분석한다. 또한 일반적으로 잘 알려져 있는 전치 왜곡기를 사용하여 HPA 비선형 특성을 보상할 경우에 자기 간섭 신호 제거 성능 및 전체적인 시스템의 성능을 분석한다. 선형적인 조건에서는 Digital Cancellation에서 잔류 자기 간섭 신호 성분 약 40dB가 모두 제거 되어 좋은 성능이 나오지만 HPA 비선형 특성이 존재할 경우 이를 보상하지 않으면 자기 간섭 신호가 상대국에서 보낸 목표신호에 비하여 월등히 커지기 때문에 상대국에서 보낸 목표 신호를 수신할 수 없다. 그러나 여기에 전치 왜곡기를 사용하면 HPA 비선형성을 대부분 보완하여 상대국에서 보낸 신호를 수신할 수 있는 것을 확인하였다. 또한 전치왜곡기를 사용한다고 하더라도 HPA 비선형 특성을 완전하게 보완할 수 없기 때문에 HPA 비선형성이 증가함에 따라 Digital Cancellation의 자기 간섭 신호 감쇄 성능이 감소되는 것을 확인하였다.

An Improved Joint Detection of Frame, Integer Frequency Offset, and Spectral Inversion for Digital Radio Mondiale Plus

  • Kim, Seong-Jun;Park, Kyung-Won;Lee, Kyung-Taek;Choi, Hyung-Jin
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제8권2호
    • /
    • pp.601-617
    • /
    • 2014
  • In digital radio broadcasting systems, long delays are incurred in service start time when tuning to a particular frequency because several synchronization steps, such as symbol timing synchronization, frame synchronization, and carrier frequency offset and sampling frequency offset compensation are necessary. Therefore, the operation of the synchronization blocks causes delays ranging from several hundred milliseconds to a few seconds until the start of the radio service after frequency tuning. Furthermore, if spectrum inversed signals are transmitted in digital radio broadcasting systems, the receivers are unable to decode them, even though most receivers can demodulate the spectral inversed signals in analog radio broadcasting systems. Accordingly, fast synchronization techniques and a method for spectral inversion detection are required in digital radio broadcasting systems that are to replace the analog radio systems. This paper presents a joint detection method of frame, integer carrier frequency offset, and spectrum inversion for DRM Plus digital broadcasting systems. The proposed scheme can detect the frame and determine whether the signal is normal or spectral inversed without any carrier frequency offset and sampling frequency offset compensation, enabling fast frame synchronization. The proposed method shows outstanding performance in environments where symbol timing offsets and sampling frequency offsets exist.

I2C 슬래이브 칩의 주소 설정을 위한 RC회로를 이용한 효과적인 아날로그-디지털 변환기 설계 (A Design of Effective Analog-to-Digital Converter Using RC Circuit for Configuration of I2C Slave Chip Address)

  • 이무진;성광수
    • 조명전기설비학회논문지
    • /
    • 제26권6호
    • /
    • pp.87-93
    • /
    • 2012
  • In this paper, we propose an analog-to-digital converter to set the address of a I2C slave chip. The proposed scheme converts a fixed voltage between 0 and VDD to the digital value which can be used as the address of the slave chip. The rising time and the falling time are measured with digital counter in a serially connected RC circuit, while the circuit is being charged and discharged with the voltage to be measured. The ratio of the two measured values is used to get the corresponding digital value. This scheme gives a strong point which is to be implementable all the parts except comparator using digital logic. Although the method utilizes RC circuit, it has no relation with the RC value if the quantization error is disregarded. Experimental result shows that the proposed scheme gives 32-level resolution thus it can be used to configure the address of the I2C slave chip.

수치지도 검수방안에 관한 연구 (A Study on the Inspection of Digital Maps)

  • 조윤숙;이종용;김명진;최현옥
    • Spatial Information Research
    • /
    • 제8권1호
    • /
    • pp.31-50
    • /
    • 2000
  • 국가 GIS 구축사업의 일환으로 지형도를 비롯한 여러 가지 주제들이 수치지도로 구축되어왔다. 이렇게 구축된 수치지도는 사용하고자 하는 목적에 맞게 올바르게 구축되어 그 정확도를 신뢰할 수 있을 경우에만 효율적으로 사용될 수 있다. 본 연구의 목적은 양질의 수치지도를 구축하는데 필요한 합리적인 검수방안을 제시하는데 있다. 이를 위해 국내·외에서 요구되는 수치지도의 품질요소와 검수현황을 살펴보았고, 수치지도에서 발생하는 오류유형을 분석했다. 이러한 오류유형을 바탕으로 데이터생성연혁, 데이트포맷, 위치정확성, 속성정확성, 기하구조의 적합성, 논리적 일관성, 경계인접, 완전성, 도곽선 범위의 9가지 기존을 마련한 뒤 작업계획, 오류유형 정의, 납품내역검수, 육안중첩검수, 현지조사검수, 전산정밀검수, 자동검수, 검수결과판정, 검수결과해석으로 이어지는 9단계의 체계적인 다단계 검수절차를 제안하였다.

  • PDF

시변 추종제어기를 위한 디지털 재설계의 개선 (Improving a Digital Redesign for Time-Varying Trackers)

  • 송현석;이호재;김도완
    • 제어로봇시스템학회논문지
    • /
    • 제17권4호
    • /
    • pp.289-294
    • /
    • 2011
  • Digital redesign is yet another efficient tool to convert a pre-designed analog controller into a sampled-data one to maintain the analog closed-loop performance in the sense of state matching. A rising difficulty in developing a digital redesign technique for trackers with time-varying references is the unavailability of a closed-form discrete-time model of a system, even if it is linear time-invariant. A way to resolve this is to approximate the time-varying reference as a piecewise constant one, which deteriorates the state matching performance. Another remedy may be to decrease a sampling period, which however could numerically destabilize the optimization-based digital redesign condition. In this paper, we develop a digital redesign condition for time-varying trackers by approximating the time-varying reference through a triangular hold and by introducing delta-operated discrete-time models. It is shown that the digitally redesigned sampled-data tracker recovers the performance of the pre-designed analog tracker under a fast sampling limit. Simulation results on the formation flying of satellites convincingly show the effectiveness of the development.

벡터합성방법에 의한 디지털-무선 변환시스템 (Digital-Radio Conversion System using Vector Synthesis Method)

  • 주창복;김성호
    • 융합신호처리학회논문지
    • /
    • 제1권2호
    • /
    • pp.131-137
    • /
    • 2000
  • 본 논문은 소프트웨어 무선에 적합한 전송장치로써 로직회로에 의해 생성되어지는 디지털신호를 직접 무선으로 변환시킬 수 있는 디지털-무선 변환장치를 제안한다. 이러한 회로가 실현되어지면 변조회로, RF회로와 안테나를 1개의 간단한 디바이스로 실현할 수 있어 소프트웨어무선의 본질인 소프트웨어처리에 의한 무선의 제어를 직접 수행할 수 있게 된다. 본 논문의 디지털-무선 변환장치는 채널화용 PN코드가 부여하는 위상각도에 의해 무수히 많은 채널화를 기할 수 있으며 디지털화에 의하여 설계에 유연성을 주게 되므로 하드웨어의 비중을 최소화시키고 소프트웨어 베이스의 유연한 기능을 갖는다.

  • PDF

이동 목표물 추정 정확도를 향상시키기 위한 고 분해능 최적 빔 지향 패턴에 관한 연구 (A Study on Super Resolution Optimum Beam Steering Pattern for Improvement Moving Target Estimation Accuracy)

  • 조성국;전병국;양길모
    • 디지털산업정보학회논문지
    • /
    • 제10권4호
    • /
    • pp.71-78
    • /
    • 2014
  • Method a target estimation in spatial are mobile wireless communication using network cell and GPS. It have much error that mobile wireless communication depend on cell size. GPS method can't find a target in shadow and inner area. In this paper, we estimate a target as direction of arrival method using adaptive array antenna system. Adaptive array antenna system can obtain desired signal to remove other signal This paper studied digital beamforming method in order to estimation a target. Proposed method is modified optimum weight and antenna error correction to estimation an optimal receive signal. Digital beamforming method decided a signal phase and amplitude from received signal on array antenna element. But if it is not to do error correction of received signal, system performance have decreased. Firstly, we proposed modified optimum weight in order to finding desired target. Secondly, we are error correction of antenna incident signals by optimal weight before digital beamforming method. Thirdly, throughly simulation, we showed that system performance of proposed method compare proposal method with general method. It have improved resolution of estimation target to good performance more proposed method than general method.