• 전기학회논문지
• /
• 제59권7호
• /
• pp.1289-1294
• /
• 2010

In this paper, a new discrete integral static output feedback variable structure controller based on the a new integral dynamic-type sliding surface and output feedback discrete version of the disturbance observer is suggested for the control of uncertain linear systems. The reaching phase is completely removed by introducing a new proposed integral dynamic-type sliding surface. The output feedback discrete version of disturbance observer is presented for effective compensation of uncertainties and disturbance. A corresponding control with disturbance compensation is selected to guarantee the quasi sliding mode on the predetermined integral dynamic-type sliding surface for guaranteeing the designed output in the integral dynamic-type sliding surface from any initial condition for all the parameter variations and disturbances. Using discrete Lyapunov function, the closed loop stability and the existence condition of the quasi sliding mode is proved. Finally, an illustrative example is presented to show the effectiveness of the algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.503-506
• /
• 1996

An integrated Robot control system for SCARA robot is developed. The system consists of an off-line programming(OLP), software and a robot controller using four digital signal processor(TMS32OC50). The OLP has functions of teaching task, dynamic simulator, three dimensional animation, and trajectory planning. To develop robust dynamic control algorithm, a new sliding mode control algorithm for the robot is proposed. The trajectory tracking performance of these algorithm is evaluated by implementing to SCARA robot(SM5 type) using DSP controller which has conventional PI-FF control algorithm. To make SCARA robot operate according to off-line teaching, an interface between OLP and robot controller in the integrated system is designed. To demonstrate performance of the integrated system, the proposed control algorithm is applied to the system.

• ETRI Journal
• /
• 제37권6호
• /
• pp.1176-1187
• /
• 2015

This work proposes a highly efficient sensorless motor driver chip for various permanent-magnet synchronous motors (PMSMs) in a wide power range. The motor driver chip is composed of two important parts. The digital part is a sensorless controller consisting mainly of an angle estimation block and a speed control block. The analog part consists of a gate driver, which is able to sense the phase current of a motor. The sensorless algorithms adapted in this paper include a sliding mode observer (SMO) method that has high robust characteristics regarding parameter variations of PMSMs. Fabricated SMO chips detect back electromotive force signals. Furthermore, motor current-sensing blocks are included with a 10-bit successive approximation analog-to-digital converter and various gain current amplifiers for proper sensorless operations. Through a fabricated SMO chip, we were able to demonstrate rated powers of 32 W, 200 W, and 1,500 W.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.41-46
• /
• 1987

A new control scheme is developed to achieve fast and accurate decoupled tracking for an n-Joint robotic manipulator In the Presence of disturbances and unknown Parameter variations. The control system is designed so that a new type of state trajectories called sliding mode may exist in a phase plane. In order to remove the reaching Phase and high frequency chattering phenomenon which ate the common shortcomings of variable structure control(VSC) scheme, this paper presents the new switching line which is composed of three segments and the continuous control law which is derived from the existence condition of a sliding mode. The Proposed methods in this Paper are applied to a 3-Joint robotic manipulator as a numerical example-The digital simulation results which are compared with those of typical VSC scheme show the validity of accurate tracking capability and robust Performance of the system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국제학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.843-847
• /
• 1988

A new control method for position control of D.C. servo motor based on the variable structure control is presented. The desired trajectory satisfying the given performance requirement is used as the sliding curve. And the control input forcing the system to follow the desired model system is applied. As a result the method is robust to disturbance. The performance of the proposed controller is compared with that of the conventional state feedback controller through digital computer simulation.

• 한국산학기술학회논문지
• /
• 제10권10호
• /
• pp.2634-2638
• /
• 2009

슬라이딩 모드를 가진 가변 구조 제어(VSC)에서의 불연속적인 제어 법칙은 실제로 바람직하지 못한 떨림 현상을 발생시킨다. 본 논문에서는 이러한 문제점을 해결하기 위해 신경망 슬라이딩 곡면을 갖는 VSC 구조를 제안한다. 불연속 제어 법칙을 해결하기 위해 경계층을 가진 신경망 슬라이딩 곡면이 도입된다. 제안된 제어기는 보편적인 VSC의 떨림 현상 문제를 해결할 수 있다. 제안된 제어 구조의 효과는 시뮬레이션을 통해 증명하였다.

• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3622-3625
• /
• 2009

본 논문은 고정 슬라이딩면을 갖는 가변 구조 제어기의 단점인 도달영역에서의 파리미터의 불확실성과 외부 외란에 대한 민감성을 감소시키는 방안으로 고정 슬라이딩면 대신 비선형 슬라이딩면을 제시한다. 비선형 슬라이딩면을 통하여 시스템 상태 궤적이 초기 위치에서부터 평형점에 이르기까지 외란과 파라미터의 불확실성에 강인하게 되며 아울러 고정 슬라이딩면까지의 도달시간 뿐만 아니라 평형점까지의 도달시간도 감소하게 되는 특성을 보이고자한다. 제안된 제어 구조의 효과는 시뮬레이션을 통해 증명하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.229-232
• /
• 1996

The position control accuracy of the robot arm is decreased significantly when a long arm robot is operated at high speed. In this case, the robot arm must be modeled as a flexible structure, not a rigid one, and its control system will be necessarily designed with its elastic modes taken into account. In this paper, the vibration control of a one-link flexible robot arm is presented. The robot system consists of a flexible arm manufactured with thin aluminium plate, AC servomotor with a harmonic drive for speed reduction, optical encoder and accelerometer. The system is modeled with limited number of elastic modes, and its parameters are determined from the results of the experiments. The implemented control schemes are LQ control and sliding mode control. The experiments and digital simulations are carried out to test the validity of the system modeling, controller design, and active control implementation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1221-1224
• /
• 1992

To obtain a robustness which is one of important characteristics needed in servo drive, the sliding mode control method is used as a control strategy. However, the undesired phenomenon of chattering is a serious problem. In this paper, an adaptive chattering alleviation algorithm for variable structure system control is proposed to solve this serious problem. Digital controller using the theory of chattering alleviation control is applied to the position control problem of an induction motor system. Comparisons of this algorithm with other variable structure system control algorithms indicate that the chattering can be alleviated. This controller is implemented using IBM-PC(8088 CPU) which controls current controlled PWM inverter consisted of IGBT as a switching device to drive motor.

• ETRI Journal
• /
• 제37권6호
• /
• pp.1154-1164
• /
• 2015

This paper proposes a fully sensorless driver for a permanent magnet synchronous motor (PMSM) integrated with a digital motor controller and an analog pre-driver, including sensing circuits and estimators. In the motor controller, a position estimator estimates the back electromotive force and rotor position using a sliding-mode observer. In the pre-driver, drivers for the power devices are designed with a level shifter and isolation technique. In addition, a current sensing circuit measures a three-phase current. All of these circuits are integrated in a single chip such that the driver achieves control of the speed with high accuracy. Using an IC fabricated using a $0.18{\mu}m$ BCDMOS process, the performance was verified experimentally. The driver showed stable operation in spite of the variation in speed and load, a similar efficiency near 1% compared to a commercial driver, a low speed error of about 0.1%, and therefore good performance for the PMSM drive.