• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.337-340
• /
• 2002

In data transmission at the digital satellite broadcasting systems, the delay and spread are caused whit receiving original signals from the transmitter in the receiver. So, there are some problems in data fast transmission. Also, transmitted signals ate received in stale of the combination of transmission delay and noise of channel. The affect of channel noise is reduced when increasing transmission power, but as signal interference due to the transmission delay and spread of channel increase in proportion to the transmission power, there is a problem in spite of increasing the transmission power. And there is the problem to add ISI(inter symbol interference) because the property of the channel is limo-varying due to relative moving in the transceiver Therefore, in this paper, a pulse shaping filter for the high-speed service in digital satellite broadcasting systems was designed and reduced the ISI.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.110-113
• /
• 2003

In this paper, the multi-channel high speed data acquisition system is implemented. This high speed signal processing system for 3-D image display is applicable to the manipulation of a medical image processing, multimedia data and various fields of digital image processing. In order to convert the analog signal into digital one, A/D conversion circuit is designed. PCI interface method is designed and implemented, which is capable of transmission a large amount of data to computer. In order to, especially, channel extendibility of images acquisition, bus communication method is selected. By using this bus method, we can interface each module effectively. In this paper, 32-channel A/D conversion and PCI interface system for 3-dimensional and real-time display of the retina image is developed. The 32-channel image acquisition system and high speed data transmission system developed in this paper is applicable to not only medical image processing as 3-D representation of retina image but also various fields of industrial image processing in which the multi-point realtime image acquisition system is needed.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.224-226
• /
• 2000

Consumer electronics is rapidly digitalized invoking the necessity of digital signal transmission. Moreover, even in consumer electronics, occasionally signal speed is over 1Gbps and long distance transmission(over 5 meters) is required. For these requirements, even though optical transmission is ideal, cost problem has blocked up its entrance to consumer market. However, inexpensive and high speed optical devices such as VCSEL, PIN or MSN PD with large detecting area and low capacitance and Plastic Optical Fiber have been developed so that optical solution can be compete with electrical one in consumer electronics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.480-481
• /
• 2009

In the paper we study for the ubiquitous networking based on power line communication technology with digital signal transmission. The necessity of research for using resources in the network effectively is being increase as network to use the PLC with smart grid networking. The data rate has compared with implemented modem 250Mbps in the pixel resolution and bandwidth, which has degraded with 80%. We also proposed for design of high-definition digital signal transceiver, which has used in the network between digital multimedia with PLC. Using resources in the network effectively can be also verified with this research.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1330-1335
• /
• 2013

In recent years, the need to simultaneously transmit a variety of signals, such as DVI(Digital Visual Interface), audio, video, USB(Universal Serial Bus), LAN from the computer is required. So the cable complexity and scalability issues have been raised. In this paper, this signal can be distributed using a single USB cable, computer, video, audio, USB, LAN, one USB multi-signal transmission system was designed and implemented. USB multi-signal transmission was implemented in order to convert a single DVI, audio, and multiple USB, LAN, USB signal converter modules. This USB DVI port supports up to 1920 * 1080 resolution. USB multi-signal transmission system by sending multiple signals into a single cable installation costs of the various cable and using the replication feature of the screen, will provide schools and institutes, etc., providing the convenience of the river, and the scalability of computer peripheral ports.

• ETRI Journal
• /
• v.34 no.2
• /
• pp.216-225
• /
• 2012

This paper presents a transceiver module for human body communications whereby a spread signal with a group of 64 Walsh codes is directly transferred through a human body at a chip rate of 32 Mcps. Frequency selective digital transmission moves the signal spectrum over 5 MHz without continuous frequency modulation and increases the immunity to induced interference by the processing gain. A simple receiver structure with no additional analog circuitry for the transmitter has been developed and has a sensitivity of 250 ${\mu}V_{pp}$. The high sensitivity of the receiver makes it possible to communicate between mobile devices using a human body as the transmission medium. It enables half-duplex communication of 2 Mbps within an operating range of up to 170 cm between the ultra-mobile PCs held between fingertips of each hand with a packet error rate of lower than $10^{-6}$. The transceiver module consumes 59 mA with a 3.3 V power supply.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.6
• /
• pp.222-226
• /
• 2009

The objective of this study is to share multimedia contents included in existing digital devices and to solve the problems of an increase in installation fees and non-environmentally friendly interiors. This study designed a new digital signal transmitter and receiver using power line transmission and HDMI in order to solve the problems in the existing systems. The transmitter and receiver designed in this study used an AD9867BCPZ PLC chip in which the transmission came from digital signals originating in a PC, and the system architecture was configured so that the outputs signals were connected to a TV from the receiver. The experiment was implemented by adding a Video Test Generator, a USBPre external sound card, and Smaart Live 6 for analyzing the characteristics of the configured system. In the video test results, it was verified that communication was actively implemented, and the image quality showed a constant level from the measurement of the captured video. In the case of the sound, it was verified that more than 90% of the sound signals were normally transmitted and received from the examination of their phases and magnitudes. Thus, the performance of the system designed in this study was verified, which leads to the resolution of some of the problems found in current digital devices.

• Journal of the Institute of Convergence Signal Processing
• /
• v.1 no.2
• /
• pp.131-137
• /
• 2000

In this paper, as a compatible software radio transmission system, Digital-Radio conversion system which can directly change the digital signal generated by the logic circuit into radio signal is proposed. By the vector synthesis method, the digital signals can change directly into radio signal. If such a circuit is realized, RF circuit and an antenna can be composed by the simple one device, and the radio is directly controlled and performed by the software processing which is the essence of software radio. This Digital-Radio conversion system of this paper give many number of communication channels being offered by PN code and offer a hardware design flexibility by digitization, therefore it decrease the percentage ratio of hardware of system and give a more flexible function of software basis. In this paper, the principle of digital to radio signal generation algorithm is explained and the performance characteristics of proposed algorithm is shown in time base by the computer simulation method.

• Journal of Digital Contents Society
• /
• v.11 no.2
• /
• pp.277-282
• /
• 2010

In this paper, the wireless transmission module is developed to transmit oxygen saturation(SpO2) signal, acquired from bio-signal measuring module, to PC. This wireless transmission module is designed with closed type protocol instead of open type protocol such as a zigbee or a bluetooth, considering of the security of personal medical informations. The display software is also developed to display transmitted SpO2 signals by various type data and graph without information loss for a emergency transfer.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.8
• /
• pp.16-25
• /
• 1994

The prediction of crosstalk in one of important problems in estimating the EMC of a system for high speed digital signal transmission. Crosstalk curves are shown in terms of characteristic impedance of lines spacing between lines and rise time of pulse by using general multiple coupled transmission line equation and harmonic-balance method. The coupled symmetrical two-line on dielectric material epoxy-glass FR 4(${\varepsilon}_r$), is fabricated to measure crosstalk occuring at the near end and far end of the passive line. The inter-line is inserted to reduce crosstalk between two microstrip lines. The simulation results and the measurement results are shown and found to be very close.