• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1964-1980
• /
• 2016

This paper presents a new simplified harmonics extraction algorithm based on the synchronous reference frame (SRF) for an indirect current controlled (ICC) three-level neutral point diode clamped (NPC) inverter-based shunt active power filter (SAPF). The shunt APF is widely accepted as one of the most effective current harmonics mitigation tools due to its superior adaptability in dynamic state conditions. In its controller, the SRF algorithm which is derived based on the direct-quadrature (DQ) theory has played a significant role as a harmonics extraction algorithm due to its simple implementation features. However, it suffers from significant delays due to its dependency on a numerical filter and unnecessary computation workloads. Moreover, the algorithm is mostly implemented for the direct current controlled (DCC) based SAPF which operates based on a non-sinusoidal reference current. This degrades the mitigation performances since the DCC based operation does not possess exact information on the actual source current which suffers from switching ripples problems. Therefore, three major improvements are introduced which include the development of a mathematical based fundamental component identifier to replace the numerical filter, the removal of redundant features, and the generation of a sinusoidal reference current. The proposed algorithm is developed and evaluated in MATLAB / Simulink. A laboratory prototype utilizing a TMS320F28335 digital signal processor (DSP) is also implemented to validate effectiveness of the proposed algorithm. Both simulation and experimental results are presented. They show significant improvements in terms of total harmonic distortion (THD) and dynamic response when compared to a conventional SRF algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7A
• /
• pp.794-806
• /
• 2004

This paper deals with correction of frequency offset and analysis of quantization angle noise in the IEEE 802.1la OFDM system. The rotation phase per symbol due to the carrier frequency offset is estimated from auto-correlation of the short Preambles, which are over-sampled for the reduction of noise in OFDM signals. The pilot signals are introduced to estimate the rotation phase per OFDM symbol due to estimation error of the carrier frequency offset and the sampling frequency onset. During the estimation and correction of the frequency onsets, a CORDIC processor and a look-up table are used for the conversion between a rotation phase and its complex number. Being calculated by a limited number of bits in the CORDIC processor and the look-up table, the rotation phase and its complex number have quantization angle errors. The quantization errors are analyzed as SNR (signal to noise ratio) due to the quantization bit numbers. The minimum bit number is suggested to meet the specification of IEEE 802.1la properly. Finally, the quantization errors are evaluated through simulations on number of quantization bits and SNR of received signals.

• The KIPS Transactions:PartB
• /
• v.13B no.3 s.106
• /
• pp.309-314
• /
• 2006

Recently, multimedia DBMS is appeared to be the core technology of the information society to store, manage and retrieve multimedia data efficiently. In this paper, we propose a new method for content based-retrieval system using wavelet transform, energy value to extract automatically feature vector from image data, and suggest an effective retrieval technique through this method. Wavelet transform is widely used in image compression and digital signal analysis, and its coefficient values reflect image feature very well. The correlation in wavelet domain between query image data and the stored data in database is used to calculate similarity. In order to assess the image retrieval performance, a set of hundreds images are run. The method using standard derivation and mean value used for feature vector extraction are compared with that of our method based on energy value. For the simulation results, our energy value method was more effective than the one using standard derivation and mean value.

• The Journal of the Korea Contents Association
• /
• v.15 no.12
• /
• pp.8-17
• /
• 2015

This paper presents a sound into color signal conversion using a colored-hearing synesthesia. The aim of the present paper is to implement a real-time conversion system which focuses on both hearing and sight which account for a great part of bodily senses. The proposed method of the real-time conversion of color into sound, in this paper, was simple and intuitive where scale, octave and velocity were extracted from MIDI input signals, which were converted into hue, intensity and saturation, respectively, as basic elements of HSI color model. In experiments, we implemented both the hardware system for delivering MIDI signals to PC and the VC++ based software system for monitoring both input and output signals, so we made certain that the conversion was correctly performed by the proposed method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.2
• /
• pp.166-171
• /
• 2015

This paper shows the design of operational flight program(OFP) using model-based design(MBD) method which is used in various engineering fields to reduce time and flight risks for development. The verification of OFP for DO-178C guidelines carry out by a model advisor function of simulink. The flight control logic on simulink is converted into C-language by auto code generation tool from, then it is implemented on 32bit digital signal processor(DSP). The verifications of flight control algorithm on various weather conditions are performed by the HILS system with Flight simulator program, X-plane.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.191-192
• /
• 1998

We report on the design of a low-noise 40 channel SQUID system for biomagnetism. We used low-noise SQUID sensor with the pickup coil integrated on the same wafer as the SQUID. The SQUID electronics were simplified by increasing the voltage output of the SQUID. The SQUID insert was designed to have low thermal load, minimizing the liquid helium loss. The digital signal processing provides versatile analysis tools and the software is based on the object-oriented programming. For the effective localization of the source location, solutions of the inverse problems based on the lead-field and the simulated anneal ins were studied.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.2
• /
• pp.121-128
• /
• 2004

As the first step of the real time monitoring system of the solar radio disturbance, we constructed the control system of the solar radio telescope. An 1.8m antenna built by Korean Astronomy Observatory has been used, and the observed radio flux is transformed to the digital signal by the powermeter. We have also developed a computer program CBNUART in order to control the telescope system and the powermeter. As the sun rises, the telescope begins to observe the sun, and ends the observation automatically at sunset. The CBNUART enables the telescope automatically to go to the position of the sunrise for the beginning the observation and come back to the setposition after the ending the observation at the sunset. An active tracking routine is adopted in order to improve the tracking accuracy of the control system, and we used an optical telescope equipped in front of the antenna for control test. The tracking test shows that our control system can track with the accuracy of arc seconds, and the 50 minute pointing test shows that the pointing accuracy of right ascension and declination are 1.12 and 0.08 arc minutes respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4A
• /
• pp.310-315
• /
• 2002

The Bark Coherence Function (BCF) defies a coherence function within perceptual domain as a new cognition module, robust to linear distortions due to the analog interface of digital mobile system. Our previous experiments have shown the superiority of BCF over current measures. In this paper, a new BCF suitable for VoIP is developed. The unproved BCF is based on the wavelet series expansion that provides good frequency resolution while keeping good time locality. The proposed Wavelet based Bark Coherence function (WBCF) is robust to variable delay often observed in packet-based telephony such as Voice over Internet Protocol (VoIP). We also show that the refinement of time synchronization after signal decomposition can improve the performance of the WBCF. The regression analysis was performed with VoIP speech data. The correlation coefficients and the standard error of estimates computed using the WBCF showed noticeable improvement over the Perceptual Speech Quality Measure (PSQM) that is recommended by ITU-T.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.2
• /
• pp.97-107
• /
• 2020

Purpose : The purpose of this study is to investigate the effect of squat exercise using a ball on the gap between knees and Q angle of a subject with a genu-varum, and to prove the effect, to provide a clinical basis for developing into a knee correction exercise program. Methods : As a result of posture measurement through GPS, 26 female with genu-varum with a knee length of 5 cm or more were studied. The group was randomly assigned to 13 squat exercise group using ball (experimental group) and 13 general squat exercise groups (control group). The experimental group placed the ball between both knees in a position where the distance between both feet was slightly wider than the shoulder width on a flat support surface, and fixed the ball, and then squat with the start signal. The control group squats without a ball. Each group performed three sets of exercise three times a week for six weeks. Before their exercise, after three and six weeks, EMG, GPS, digital goniometer measurement, the vastus medialis (VM), the vastus lateralis (VL), and the Q-angle were measured in the squat exercise posture. EMG was measured in squat exercise posture. Results : The distance between the knees was reduced. EMG is activated in group A, the group B experimental results showed the high activity of the VL. Q-angle had increased. But the experimental group increased more than the control group. Conclusion : We have confirmed through our experiments that the distance interval between the knees during squat exercises using a ball can be reduced. Furthermore, it would also be helpful to ensure the treatment of genu-varum.

• Journal of KIISE:Software and Applications
• /
• v.28 no.10
• /
• pp.699-705
• /
• 2001

As it became possible to generate 3D sound on a PC environment due to the advances in computing performance and digital signal processing technology, 3D sound technology gains its focus in the multimedia area Specifically a two-channel based 3D sound technology is being studied by many researchers because of its space efficiency and economical structure. While the positional sound effect is simple in its implementation, the moving sound effect has many problems to be resolved as there are only discrete measured point of HRTF database. In this paper, we propose the method of generating smooth moving sound in a two-channel based 3D sound technique with respect to generating smooth trajectory, and the interpolation method of discrete measured HRTF data. We perform the tests in the PC environment and prove the utility of the proposed method.