• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.244-246
• /
• 2001

In a full digital implementation of a current regulator, the voltage output is inevitably delayed due to arithmetic calculation and PWM. In case of the synchronous frame current regulator, the time delay is accompanied by the rotation of frame. In some applications in which the ratio of sampling frequency to output frequency is not high enough, such as high power drive or super high-speed drive, it is known that the effect of rotation of frame during the delay time causes phase and magnitude error in the voltage output. The error degrades the dynamic performance and can bring about the instability of current regulator at high speed. It is also intuitively known that advancing the phase of voltage output can mitigate the instability. In this paper, the instability problems are studied analytically and a compensation method for the error has been proposed. By means of computer simulation and complex root locus analysis, comparative study with conventional methods is carried out and the effectiveness of proposed method is verified.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.32-34
• /
• 2007

전자산업 부문의 친환경 대응이 이슈화 되면서 전자기기의 대기전력 소비감소를 위한 연구가 지속적으로 수행되고 있다. 전자기기의 대표적인 전원공급장치인 Switched Mode Power Supply(SMPS)의 경우 부하기기의 대기모드 시 극도로 낮은 출력전력에서 고효율을 달성해야 하는 요구가 높다. 특히 많은 SMPS들이 부하기기의 요구에 의하여 다출력 컨버터로 설계되어 있는데, 이러한 다출력 구조에서 대기모드 시 불필요한 출력을 절체함과 동시에 저전력에서 고효율을 내기가 쉽지 않다. 또한 다출력 구조로 인한 Cross Regulation 문제를 극복해야 하는 과제가 있다. 따라서 본 논문에서는 단일 컨버터 혹은 복수의 컨버터로 구성되어 있는 다출력 컨버터에서 대기전력 개선을 위한 Secondary Side Post Regulator(SSPR), 전류모드, Power Sequence 제어기술을 제안하고, 대기전력과 더불어 SSPR의 Cross Regulation 특성 개선을 검토하였다. 그리고 제안한 기술이 구현된 다출력 구조의 110W와 270W급 SMPS를 제작하여 회로의 타당성 및 우수성을 검증하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.246-247
• /
• 2015

자동전압조정장치(AVR)의 종류는 Analog Type과 Digital Type으로 나눌 수 있다. 브러쉬리스형의 동기발전기의 자동전압조정장치는 전 부하에 대하여 전압변동을 작게 하여야 한다. 일반적인 제어기법으로는 PID 제어방식이 일반적으로 많이 사용되고 있다. 본 연구에서는 제어대상의 파라미터변동에 대하여 제어기의 파라미터를 재설정 하지 않는 iPID(intelligent PID:지적 PID)제어기를 이용하여 동기발전기 Digital 자동전압조정장치(AVR)에 적용하여 전부하시에도 전압변동이 작고, 속응성이 향상된 제어기를 연구 하였다.

• 한국정보통신학회논문지
• /
• 제10권10호
• /
• pp.1804-1809
• /
• 2006

본 고에서는 디지털 회로의 저 전력소모의 설계와 구현에 관련된 디지털 전대역 회로 설계를 통해서 전반적인 전력 소모의 방법론과 이의 특성을 고찰하고자 한다. 디지털 집적회로의 설계는 광대하고 복잡한 영역이기에 우리는 이를 저전력 소모의 전반적인 회로 설계에 한정할 필요가 있다. 여기에는 로직회로의 합성과, 디지털 전대역 회로설계에 포함되어 있는 입력 clock 버퍼, 레치, 전압 Regulator, 그리고 케페시턴스와 전압기가 0.12 마이크론의 기술로 0.9V의 전압과 함께 쓰여져서 동적 그리고 정적 에너지 소모와 압력, 가속, Junction temperature 등을 모니터 할 수 있게 되어 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.58_59
• /
• 2009

Generator excitation system, supplying the voltage to power system, is controlled by various manners as aspects of power system. Previously excitation systems mainly used AVR(Automatic Voltage Regulator) and FCR(Field Current Regulator) to control voltage, but nowadays the excitation systems have the tendency to adopt AQR(Automatic Reactive power Regulator) and APFR(Automatic Power Factor Regulator) to do it so as to get into step with diverse requirements of power system and high digital technology. This paper presents which operation methods is effective for the equipment, according to increase the unmanned power station thanks to automation technic.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.979-984
• /
• 2007

This paper presents a new control mechanism for the proportional pressure control which is accomplished by electro-pneumatic regulator using two PZT actuators. The electro-pneumatic regulator of this study is 2-stage type and consists of two piezoelectric actuators, a controller and a main poppet valve. The piezoelectric actuators are multilayer bender type and are controlled by digital signal. Proportional pressure control technique is very important because that can derive improvement of product quality and driving ability in the pneumatic system. Solenoid actuator method for pressure control is widely used but this actuator has a high power consumption characteristics. So new actuator is required for the energy saving. In this study, PZT actuator for the pressure control was fabricated and experimented instead of the conventional type solenoid actuator. Experiments for the new control mechanism of the elector-pneumatic regulator were operated under the input condition of 0.4[MPa] and it was confirmed that this mechanism has a good control characteristics to the response sensitivity and hysteresis.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.469-471
• /
• 1999

In this paper, the method of Space-Vector Pulse Width Modulation(SVPWM) with Fuzzy Logic Regulator(FLR) is proposed. In a conventional SVPWM, the procedures of phase transformation and choosing PWM patterns are complex. So, it should be implemented with high performance processor like Digital Signal Processor(DSP). In order to reduce a calculation burden, a proposed system adopts FLR. Using a linguistic contro strategy based on expert knowledge, FLR relieves the processor from a heavy computations. In simulations, the proposed system is validated.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.140-142
• /
• 2006

This paper represents a digital parallel control of a synchronous buck converter using a digital signal processor (DSP). The digital PWM and load sharing controller is implemented in the DSP TMS320F2812 and the experimental results are provided to show the feasibility of the digital synchronous buck regulator.

• 소음진동
• /
• 제7권2호
• /
• pp.301-310
• /
• 1997

This paper presents active noise control method to form the near-field quiet zone for passengers in an automobile. The actuator model including interior acoustic plant, speaker and amplifier is experimentally identified in forms of auto-regressive and moving average by means of least mean square algorithm, The digital controller is composed of the regulator and Kalman filter to be designed based on LQG (linear quadratic gaussian). If the actuator model is prefiltered with digital filter to be properly designed for concentrating control performance index on the frequency band of primary noise source, LQG design approach can be effectively applied for the design of headset controller. Experimental results demonstrate that near-field quiet zone showing about 10dB noise reduction at microphone position can be formed using the headset located at passenger seat.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1102-1103
• /
• 2007

This Paper presents a solution to control the Brushless DC Motor(BLDCM) in Digital Lightening Processor(DLP) using the Linear Quadratic Regulator(LQR). Generally, The speed of BLDCM in DLP is controlled by the lead angle control or the input voltage control using PAM(Pulse Amplitude Modulation) etc. These control methods have speed overshoot in speed control and need the long time until BLDCM reaches at the steady state. In order to improve the performance, this paper present the PI speed controller using the LQR based on vector control and the rotor position detection methods at the space vector PWM inverter. The proposed methods are proved by the experimental results