• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.2
• /
• pp.55-63
• /
• 2019

The aim of this article was to review various methods used to evaluate the accuracy of digital dental models. When evaluating the accuracy of digital models, the errors can be reduced by educating examiners and using artificial landmarks. The accuracy evaluation methods of digital dental models are divided into linear measurement, 2-dimensional cross-sectional analysis, and 3-dimensional best fit measurement. As the technology of scanners develops, many studies have been conducted to compare the accuracy of digital impression and conventional impression. According to improvement of scan technologies and development of 3-dimensional model analysis software, the ability to evaluate the accuracy of digital models is becoming more efficient. In this article, we describe the methods for evaluating the accuracy of a digital model and investigate effective accuracy analysis methods for each situation.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.1
• /
• pp.17-28
• /
• 2003

Digital technology has advanced very significantly over the years both in terms of software tools and hardware available. It is now applied extensively in many area of electrical engineering including protective relaying in power systems. Digital relays based on digital technology have many advantages over the traditional analog relays. The digital relay is able to do what is difficult or impossible in the analog relays. However, the complex algorithms associated with the digital relays are difficult to test and verify in real time on real power systems. Although non real-time simulators like PSCAD/EMTDC are employed to test the algorithms, such simulations have the disadvantage that they cannot test the relay dynamically. Hence, real-time simulators like RTDS are used, but the latter needs large space and it is very expensive. This paper uses EMTP MODELS to simulate the power system and the distance relay. The distance relay algorithm is constructed and the distance relay is interfaced with a test power system. The distance relays performance is then assessed interactively under various fault types, fault distances and fault inception angles. The test results show that we can simulate the distance relay effectively and we can examine the operation of the distance relay very closely including debugging by using EMTP MODELS.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.914-916
• /
• 2003

Most current 3D digital maps are 2.5 dimension models based on DEM, which can only be recognized, browsed and operated by a special software, far from meeting the needs of a modern digital city (global) with the distributed, isomerous and multiple application on the real 3D representation and open sharing models. In this paper, a new generation digital city oriented 3D digital map is studied. Firstly, a real 3D digital map representation is presented. And then, some key techniques and methods for browser-based 3D digital map’s representation, display and operation are introduced, which can realized the open sharing of 3D map in distributed, isomerous and multiple application environment. Furthermore, the scale driving technique of proposed 3D digital map is also studied. And currently, some developments based on some of the above methods are being carried to provide key and general platform for other application software’s development.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.230-232
• /
• 2005

This paper proposes a Distributed Transaction models based on the multimedia framework (MPEG-21) in digital convergence environment. Digital media market is growing up rapidly according to the extension of internet and universality of multimedia contents. So, importance of the effective management with the production and distribution of produced multimedia contents is becoming larger. For effective management of multimedia contents, the multimedia contents which are represented with different standard each other can be processed adaptively in the variable network environment. A free compatibility among the different terminals and standards are the essential particular should be offered for the digital convergence environment. A multimedia framework supports this compatibility and various multimedia services. In this paper, the Distributed Transaction models that multimedia contents can be circulated among the individual users safely and freely are proposed and the relation technologies are described.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.4
• /
• pp.236-249
• /
• 2022

PURPOSE. The present study compared the accuracy between digital and conventional implant impressions. MATERIALS AND METHODS. The experimental models were divided into six groups depending on the implant location and the scanning span. Digital impressions were captured using the intraoral optical scanner TRIOS (3Shape, Copenhagen, Denmark). Conventional impressions were taken with the monophase impression material based on addition-cured silicones, Honigum-Mono (DMG, Hamburg, Germany). A high-precision laboratory scanner D900 (3Shape, Copenhagen, Denmark) was used to obtain digital data of resin models and stone casts. Surface tessellation language (STL) datasets from scanner were imported into the analysis software Geomagic Qualify 14 (3D Systems, Rock Hill, SC, USA), and scan body deviations were determined through two-dimensional and three-dimensional analyses. Each scan body was measured five times. The Sidak t test was used to analyze the experimental data. RESULTS. Implant position and scanning distance affected the impression accuracy. For a unilateral arch implant and the mandible models with two implants, no significant difference was observed in the accuracy between the digital and conventional implant impressions on scan bodies; however, the corresponding differences for trans-arch implants and mandible with six implants were extremely significant (P<.001). CONCLUSION. For short-span scanning, the accuracy of digital and conventional implant impressions did not differ significantly. For long-span scanning, the precision of digital impressions was significantly inferior to that of the traditional impressions.

• Architectural research
• /
• v.17 no.1
• /
• pp.21-30
• /
• 2015

This study examines the significance of digital fabrication of scaled physical models in the digital design process and highlights the integration of design computing and digital fabrication in architectural education. Advances in CAD/CAM technologies have increasingly influenced building design and construction practices by allowing the production of complex forms that were once difficult to design and construct using traditional technologies. At the advent of digital architecture, schools of architecture introduced digital technologies to their curriculum, focusing more on design computing than digital fabrication, preventing students from completely mastering digital technologies. The significance of digital fabrication for scaled physical models as a design media within the digital design loop is discussed. Two case studies of leading schools of architecture that are successful in building the bridge between both areas are given. These focus on the curricular structure to integrate both areas within design studios. Finally, a curricular structure offering students a balanced approach to these areas of knowledge is proposed based on what was learned from these case studies.

• Journal of Ship and Ocean Technology
• /
• v.8 no.4
• /
• pp.45-55
• /
• 2004

How to achieve engineering collaboration among diverse engineering activities is one of the key topics in manufacturing fields nowadays. The infrastructure for collaborative engineering is essential, and it can be realized by information technologies and intelligent engineering applications in digital environments. Digital Manufacturing is a technology to facilitate effective product developments and agile productions by computer models representing the physical and logical schema and the behavior of real manufacturing systems including products, processes and factories. A digital factory as a well-designed and integrated digital environment is incorporated in it. In this paper, digital manufacturing is recommended as a good strategy for collaborative engineering, especially in product developments and productions. By business process analysis and some case studies, we suggested sophisticated digital models are very useful to concurrent and collaborative engineering. It is expected that digital manufacturing is a very good strategy for achieving dramatic time and cost savings in many engineering activities of many manufacturing industries, including machinery, automotive and shipbuilding.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.5
• /
• pp.271-279
• /
• 2019

PURPOSE. The newest technologies for digital implant impression (DII) taking are developing rapidly and showing acceptable clinical results. However, scientific literature is lacking data from clinical studies about the accuracy of DII. The aim of this study was to compare digital and conventional dental implant impressions (CII) in a clinical environment. MATERIALS AND METHODS. Twenty-four fixed zirconia restorations supported by 2 implants were fabricated using conventional open-tray impression technique with splinted transfers (CII group) and scan with Trios 3 IOS (3Shape) (DII group). After multiple verification procedures, master models were scanned using laboratory scanner D800 (3Shape). 3D models from conventional and digital workflow were imported to reverse engineering software and superimposed with high resolution 3D CAD models of scan bodies. Distance between center points, angulation, rotation, vertical shift, and surface mismatch of the scan bodies were measured and compared between conventional and digital impressions. RESULTS. Statistically significant differences were found for: a) inter-implant distance, b) rotation, c) vertical shift, and d) surface mismatch differences, comparing DII and CII groups for mesial and distal implant scan bodies ($P{\leq}.05$). CONCLUSION. Recorded linear differences between digital and conventional impressions were of limited clinical significance with two implant-supported restorations.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.3
• /
• pp.420-428
• /
• 2012

In this paper, a novel intelligent digital redesign (IDR) technique is proposed for the nonlinear interconnected systems which can be represented by a Takagi-Sugeno (T-S) fuzzy model. The IDR technique is to convert a pre-designed analog controller into an equivalent digital one. To develop this method, the discretized models of the analog and digital closed-loop system with the decentralized controller are presented, respectively. Using these discretized models, the digital decentralized control gain is obtained to minimize the norm between the state variables of the analog and digital closed-loop systems and stabilize the digital closed-loop system. Its sufficient conditions are derived in terms of linear matrix inequalities (LMIs). Finally, a numerical example is provided to verify the effectiveness of the proposed technique.

• Journal of Korea Multimedia Society
• /
• v.25 no.8
• /
• pp.1085-1096
• /
• 2022

The manufacturing industry is continuously pursuing advanced technology and smartization as it converges with innovative technology. Improvement of manufacturing productivity is achieved by monitoring, analyzing, and controlling the facilities and processes of the manufacturing site in real time through a network. In this paper, we proposed a new OPC-UA based digital twin model for smart factory facilities. A testbed system for USB flash drive packaging facility was implemented based on the proposed digital twin model and OPC-UA data communication scheme. Through OPC-UA based digital twin model, equipment and process status information is transmitted and received from PLC to monitoring and control 3D digital models and physical models in real time. The usefulness of the developed digital twin testbed system was evaluated through usability test.